Using X-ray catalogues to find counterparts to unassociated high-energy Fermi/LAT sources

The first Fermi Large Area Telescope (LAT) catalogue of sources (1FHL) emitting at high energies (above 10 GeV) reports the details of 514 objects detected in the first three years of the Fermi mission. Of these, 71 were reported as unidentified in the 1FHL catalogue, although six are likely to be associated with a supernova remnant (SNR), a Pulsar Wind Nebula (PWN) or a combination of both, thereby leaving a list of 65 still unassociated objects. Herein, we report a preliminary analysis on this sample of objects concentrating on nine 1FHL sources, which were found to have a clear optical extragalactic classification. They are all blazar, eight BL Lac and one flat spectrum radio quasar, typically at redshift greater than 0.1.Comment: Proceedings of "Swift: 10 Years of Discovery", December 2-5 2014, Rome, Italy, in Proceedings of Science (SWIFT 10

Swift/XRT counterparts to unassociated Fermi high-energy LAT sources

We report the results from our analysis of a large set of archival data acquired with the X-ray telescope (XRT) onboard Swift, covering the sky region surrounding objects from the first Fermi Large Area Telescope (LAT) catalogue of high-energy sources (1FHL), which still lack an association. Of the 23 regions analysed, ten did not show any evidence of X-ray emission, but 13 were characterised by the presence of one or more objects emitting in the 0.3-10 keV band. Only in a couple of cases is the X-ray counterpart located outside the Fermi positional uncertainty, while in all other cases the associations found are compatible with the high-energy error ellipses. All counterparts we found have been studied in detail by means of a multi-waveband approach to evaluate their nature or class; in most cases, we have been able to propose a likely or possible association except for one Fermi source whose nature remains doubtful at the moment. The majority of the likely associations are extragalactic in nature, most probably blazars of the BL Lac type.Comment: 13 pages, 5 figures, 4 tables. Accepted for publication in A&

Swift/XRT follow-up observations of unidentified INTEGRAL/IBIS sources

Many sources listed in the 4th IBIS/ISGRI survey are still unidentified, i.e. lacking an X-ray counterpart or simply not studied at lower energies (< 10 keV). The cross-correlation between the list of IBIS sources in the 4th catalogue and the Swift/XRT data archive is of key importance to search for the X-ray counterparts; in fact, the positional accuracy of few arcseconds obtained with XRT allows us to perform more efficient and reliable follow-up observations at other wavelengths (optical, UV, radio). In this work, we present the results of the XRT observations for four new gamma-ray sources: IGR J12123-5802, IGR J1248.2-5828, IGR J13107-5626 and IGR J14080-3023. For IGR J12123-5802 we find a likely counterpart, but further information are needed to classified this object, IGR J1248.2-5828 is found to be a Seyfert 1.9, for IGR J13107-5626 we suggest a possible AGN nature, while IGR J14080-3023 is classified as a Seyfert 1.5 galaxy.Comment: 6 pages, 4 figure and 2 tables. Accepted for publication on PoS (contribution PoS(extremesky2009)018), proceedings of "The Extreme sky: Sampling the Universe above 10 keV", held in Otranto (Italy), 13-17 October 200

The INTEGRAL high energy cut-off distribution of type 1 AGN

In this letter we present the primary continuum parameters, the photon index Gamma and the high energy cut-off Ec, of 41 type-1 Seyfert galaxies extracted from the INTEGRAL complete sample of AGN. We performed a broad band (0.3-100 keV) spectral analysis by fitting simultaneously the soft and hard X-ray spectra obtained by XMM and INTEGRAL/IBIS-Swift/BAT respectively in order to investigate the general properties of these parameters in particular their distribution and mean values. We find a mean photon index for the whole sample of 1.73 with a standard deviation of 0.17 and a mean high energy cut-off of 128 keV with a standard deviation of 46 keV. This is the first time that the cut-off energy is constrained in a such large number of AGN. We have 26 measurements of the cut-off, which corresponds to 63% of the entire sample, distributed between 50 and 200 keV. There are a further 11 lower limits mostly below 300 keV. Using the main parameters of the primary continuum, we have been able to obtain the actual physical parameters of the Comptonizing region i.e. the plasma temperature kT_e from 20 to 100 keV and the optical depth tau <4. Finally, with the high S/N spectra starting to come from NuSTAR it will soon be possible to better constrain the cut-off values in many AGN, allowing the determination of more physical models and so to better understand the continuum emission and geometry of the region surrounding black holes.Comment: 21 pages, 4 figures, 1 table. Accepted for publication on ApJ Letter

Flat-spectrum radio sources as likely counterparts of unidentified INTEGRAL sources (Research Note)

Many sources in the fourth INTEGRAL/IBIS catalogue are still unidentified, since they lack an optical counterpart. An important tool that can help in identifying/classifying these sources is the cross-correlation with radio catalogues, which are very sensitive and positionally accurate. Moreover, the radio properties of a source, such as the spectrum or morphology, could provide further insight into its nature. Flat-spectrum radio sources at high Galactic latitudes are likely to be AGN, possibly associated to a blazar or to the compact core of a radio galaxy. Here we present a small sample of 6 sources extracted from the fourth INTEGRAL/IBIS catalogue that are still unidentified/unclassified, but which are very likely associated with a bright, flat-spectrum radio object. To confirm the association and to study the source X-ray spectral parameters, we performed X-ray follow-up observations with Swift/XRT. We report the results obtained from this search and discuss the nature of each source. 5 of the 6 radio associations are also detected in X-rays; in 3 cases they are the only counterpart found. IGR J06073--0024 is a flat-spectrum radio quasar at z=1.08, IGR J14488--4008 is a newly discovered radio galaxy, while IGR J18129--0649 is an AGN of a still unknown type. The nature of IGR J07225--3810 and IGR J19386--4653 is less well defined, since in both cases we find another X-ray source in the INTEGRAL error circle; nevertheless, the flat-spectrum radio source, likely to be a radio loud AGN, remains a viable and more convincing association in both cases. Only for IGR J11544--7618 could we not find any convincing counterpart since the radio association is not an X-ray emitter.Comment: 7 pages, 7 figures, accepted for publication on Astronomy and Astrophysic

Alkali-activation of aggregate fines from construction and demolition waste: valorisation in view of road pavement subbase applications

This study investigates the potential of fine particles of recycled construction and demolition waste (CDW) aggregate to undergo alkali-activation when mixed with an appropriate alkaline solution. The fine is a natural by-product of the milling process and includes particles from four main material sources (i.e., recycled concrete, recycled asphalt, crushed bricks and tiles, and natural aggregate and excavated soil) and other occasional elements which are too small for identification. The fine was obtained by sifting the material through a 125 μm sieve. Since the reactivity of unselected material depends on its constituents, these were also individually investigated. Firstly, the four constituents of CDW recycled aggregates were separated, then milled to a size smaller than 125 μm, before being tested to measure their reactivity to an alkaline solution. A preliminary chemical and mineralogical characterization of the five powders was carried out to identify the main crystalline phases and ascertain the presence of aluminosilicates needed for the alkali activation process. Particles of each powder were afterwards mixed with three concentrations of the same alkaline solution with a liquid/solid mass ratio of 0.4, cast in prismatic moulds, and cured at room temperature. Mechanical tests after 3, 7, and 28 days of curing demonstrated that powders react positively in a basic environment, showing an increase in strength without any thermal treatment. Hardened pastes of undivided fine aggregate and recycled asphalt exhibited the best results in terms of flexural and compressive strength with the more concentrated solution. A Field Emission Scanning Electron Microscopy analysis was also carried out to observe the microstructure and to support an interpretation of the mechanical strength data. Results demonstrated the feasibility of using a solution to activate unselected CDW fine particles to stabilize CDW aggregates. In full scale applications, CDW aggregates can be stabilized without the addition of any binder

Optical properties of graphite

Optical constants of graphite for ordinary and extraordinary waves are modeled with a modified Lorentz-Drude model with frequency-dependent damping. The model enables the shape of the spectral line to vary over a range of broadening functions with similar kernels and different wings, the broadening type being its adjustable parameter. The model parameters are determined by the acceptance-probability-controlled simulated annealing algorithm. Good agreement with the experimental data is obtained in the entire investigated spectral range (0.12-40 eV for ordinary wave and 2.1-40 eV for extraordinary wave). The significant discrepancies between the experimental data obtained by the reflectance measurements and the electron-energy-loss spectroscopy data are analyzed in details. Inconsistency in terms of unsatisfied Kramers-Kronig relations is discovered in the index of refraction data derived from reflectance measurements, and a method for correcting the data is proposed. © 1999 American Institute of Physics.published_or_final_versio