Formation of Palygorskite Clay from Treated Diatomite and its Application for the Removal of Heavy Metals from Aqueous Solution

Environmental contamination by toxic heavy metals is a serious worldwide phenomenon. Thus, their removal is a crucial issue. In this study, we found an efficient adsorbent to remove Cu2+ and Ni2+ from aqueous solution using two materials. Chemical modification was used to obtain palygorskite clay from diatomite. The adsorbents were characterized using X-ray florescence, Fourier transform infrared spectroscopy and X-ray diffraction. The effects of contact time, initial concentration, temperature and pH on the adsorption process were investigated. Our results showed that the (%) of maximum adsorption capacity of diatomite was 78.44% for Cu2+ at pH 4 and 77.3% for Ni2+ at pH 7, while the (%) of the maximum adsorption on palygorskite reached 91% for Cu2+ and 87.05% for Ni2+, in the same condition. The results indicate that the pseudo-second-order model can describe the adsorption process. Furthermore, the adsorption isotherms could be adopted by the Langmuir and the Freundlich models with good correlation coefficient (R-2). Thus, our results showed that palygorskite prepared from Tunisian diatomite is a good adsorbent for the removal of heavy metals from water.This research was funded by Department of Education of the Basque Government grant number [IT1008-16]" and "The APC was funded by Department of Education of the Basque Government

Antioxidant, Antifungal and Phytochemical Investigations of Capparis spinosa L.

The antioxidant and antifungal activities of crude hydro-ethanolic extract from Capparis spinosa L. (Capparidaceae) leaves and their fractions, obtained by liquid-liquid extraction (LLE) using solvents with increasing polarity (hexane, diethyl ether, ethyl acetate, butanol, and water), were investigated. The crude extract and the obtained fractions were characterized by colorimetric analysis, pyrolysis-gas chromatography (GC)-mass spectroscopy (MS), Fourier Transform Infrared Spectroscopy, and their antioxidant and antifungal capacity were determined. It was observed that the ethyl acetate fraction was enriched in polyphenols, the butanol fraction resulted in purified from proteins and the residual aqueous fraction contains more hydrophobic compounds. The evaluation of the antioxidant activity revealed that the ethyl acetate fraction possesses an interesting capacity 1,1-diphenyl-2-picrylhydrazyl(DPPH) radical scavenging with a percentage of inhibition of 84.02% at a concentration of 2 mg/mL and better ferric reducing antioxidant power (FRAP) 4.275 ± 0.011 mmol/g of dry sample than the other fractions tested. Regarding the antifungal activity, the diethyl ether fraction showed the highest activity against Aspergillus niger with 58.78% of inhibition. The results obtained in this work showed the relevance of the valorization of the leaves of Capparis spinosa L., given its richness in bioactive molecules can be regarded as a natural source of antioxidant and antifungal and may be considered in the future to replace synthetic preservatives in food, pharmaceutic products and cosmetic.This research was funded by University of Basque Country, grant number PES20/38 and “The APC was funded by University of Basque Country”

Investigation of Antimicrobial Activity and Statistical Optimization of Bacillus subtilis SPB1 Biosurfactant Production in Solid-State Fermentation

During the last years, several applications of biosurfactants with medical purposes have been reported. Biosurfactants are considered relevant molecules for applications in combating many diseases. However, their use is currently extremely limited due to their high cost in relation to that of chemical surfactants. Use of inexpensive substrates can drastically decrease its production cost. Here, twelve solid substrates were screened for the production of Bacillus subtilis SPB1 biosurfactant and the maximum yield was found with millet. A Plackett-Burman design was then used to evaluate the effects of five variables (temperature, moisture, initial pH, inoculum age, and inoculum size). Statistical analyses showed that temperature, inoculum age, and moisture content had significantly positive effect on SPB1 biosurfactant production. Their values were further optimized using a central composite design and a response surface methodology. The optimal conditions of temperature, inoculum age, and moisture content obtained under the conditions of study were 37°C, 14 h, and 88%, respectively. The evaluation of the antimicrobial activity of this compound was carried out against 11 bacteria and 8 fungi. The results demonstrated that this biosurfactant exhibited an important antimicrobial activity against microorganisms with multidrug-resistant profiles. Its activity was very effective against Staphylococcus aureus, Staphylococcus xylosus, Enterococcus faecalis, Klebsiella pneumonia, and so forth

Preparation of chitosan/tannin and montmorillonite films as adsorbents for Methyl Orange dye removal

A series of novel chitosan/tannin/montmorillonite (Cs/Tn/MMT) films were synthesised by loading different (from 0.2 to 0.5wt%) and MMT (from 0.5 to 1.5wt%) ratios, to be used as promising low-cost biosorbents for methyl orange (MO) removal from aqueous media. The prepared films were characterised using different techniques such as x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), water contact angle, optical properties, colourimetric measurement, porosity, swelling and thickness. The effects of various parameters, i.e. initial MO concentration, adsorbent dose, pH and temperature, were studied. The Cs/Tn0.2/MMT1 film showed a high removal efficiency of 95.62% and maximum adsorption capacity of 57.37mg/g under the optimum adsorption conditions (initial methyl orange concentration 60mg/L, pH7 and 25°C). The adsorption kinetic followed the pseudo second order kinetic model and the experimental data were a good fit for the Langmuir isotherm indicating a homogeneous and monolayer adsorption process. The thermodynamic parameters suggested physical adsorption and exothermic behaviour. Consequently, Cs/Tn/MMT films showed effective potential for the uptake of anionic dyes.The authors thank the Basque Government (IT1008-16) and Tunis El Manar University for financially supporting this work