406 research outputs found

    Impact of adding palatal rugae to complete dentures on patient satisfaction and oral health-related quality of life: A randomized crossover clinical trial

    Get PDF
    STATEMENT OF PROBLEM: The addition of palatal rugae to complete dentures has been suggested to improve the satisfaction of patients with different oral functions. However, clinical studies to support these claims are lacking. PURPOSE: The purpose of this randomized, single-blind, 2-period crossover trial was to assess the satisfaction of edentulous patients and their oral health impact profile when provided with complete dentures with palatal rugae compared with a polished palate. MATERIAL AND METHODS: Edentulous patients aged 45 to 80 years, with no relevant medical conditions, seeking complete dentures at a university hospital between May and July 2019 were recruited. Each participant received new complete dentures. After a 1-week adaptation period, the participants were randomly allocated to 2 sequences through a computer-generated sequence. In the first sequence, palatal rugae were added to the complete dentures, and after 2 months, the palatal rugae were removed and the dentures used for another 2 months. In the second sequence, the opposite sequence was followed: polished palate first and palatal rugae second. After each period, a blinded dentist asked participants to rate their general satisfaction on a 100-mm visual analog scale (primary outcome) and to rate their satisfaction regarding eating, taste perception, speaking, phonetics, and ease of cleaning. Participants were also asked to fill the 20-item oral health impact profile for edentulous patients (OHIP-EDENT). The paired sample t test and the Wilcoxon test were used (α=.05). RESULTS: Fifty participants were randomized, of whom 6 dropped out. No significant differences were found between ratings for the 2 palatal contours in terms of general satisfaction 2.32 (95% confidence interval: -3.65 to 8.29, P=.438), eating 1.70 (95% confidence interval: -4.05 to 7.46, P=.554), taste perception 0.57 (95% confidence interval -5.04 to 6.17, P=.839), phonetics 1.48 (95% confidence interval -4.46 to 7.41, P=.618), or speaking 3.68 (95% confidence interval: -1.92 to 9.28, P=.192). However, satisfaction with ease of cleaning dentures with palatal rugae was significantly less 12.16 (95% confidence interval: 6.81 to 17.50, P.05), except for the frequency of mealtime interruption (P=.041), which was reported to increase when rugae had been provided. CONCLUSIONS: Complete dentures with palatal rugae were not perceived to improve patient satisfaction or oral health-related quality of life. However, they were perceived to be more difficult to clean and to increase frequency of interruptions during eating

    Dual acting therapeutic proteins for intraocular use

    Get PDF
    Antibody-based medicines that target vascular endothelial growth factor (VEGF) are administered by intravitreal injection to treat chronic neovascular retinal diseases. Much ongoing effort is focused on enhancing therapeutic outcome of these medicines. One strategy is the use of dual acting drugs (e.g. bispecific antibodies) to simultaneously bind to more than one intraocular biological target. A dual acting molecule targeting components within the vitreal cavity could also potentially extend vitreous residence time. In this review, the applications of bispecific antibodies within the eye are described with consideration to potential targets, applications and suitable bispecific formats

    Nicotine metal complexes: synthesis, characterization and bioactivities of some main group and some transition metals

    Get PDF
    A number of some main group and transition metal nicotine complexes were synthesized and fully characterized using detailed structural and spectroscopic analysis techniques such as elemental analysis, molar conductivities, magnetic susceptibilities, IR, Raman and NMR techniques. Moreover, scanning electron micrographs and thermogravimetric analyses were also done. Cytotoxic activities of the binary nicotine metal complexes were tested and evaluated against HepG2 (human hepatocellular carcinoma), HPC3 (human prostate cancer), and HCT116 (human colorectal carcinoma) tumor cell lines. The antioxidant activities were examined by free radical scavenging assay. The antimicrobial activities of the synthesized complexes were evaluated against Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) microbes. The relationship between the chemical structure of the synthesized complexes and their biological influence as antimicrobial drugs was studied and evaluated.                     KEY WORDS: Nicotine metal complexes, Cytotoxicity, Antioxidant, Antimicrobial   Bull. Chem. Soc. Ethiop. 2020, 34(3), 501-521. DOI: https://dx.doi.org/10.4314/bcse.v34i3.

    Accelerated hyperfractionation (AHF) compared to conventional fractionation (CF) in the postoperative radiotherapy of locally advanced head and neck cancer: influence of proliferation

    Get PDF
    Based on the assumption that an accelerated proliferation process prevails in tumour cell residues after surgery, the possibility that treatment acceleration would offer a therapeutic advantage in postoperative radiotherapy of locally advanced head and neck cancer was investigated. The value of Tpot in predicting the treatment outcome and in selecting patients for accelerated fractionation was tested. Seventy patients with (T2/N1–N2) or (T3-4/any N) squamous cell carcinoma of the oral cavity, larynx and hypopharynx who underwent radical surgery, were randomized to either (a) accelerated hyperfractionation: 46.2 Gy per 12 days, 1.4 Gy per fraction, three fractions per day with 6 h interfraction interval, treating 6 days per week or (b) Conventional fractionation: 60 Gy per 6 weeks, 2 Gy per fraction, treating 5 days per week. The 3-year locoregional control rate was significantly better in the accelerated hyperfractionation (88±4%) than in the CF (57±9%) group, P=0.01 (and this was confirmed by multivariate analysis), but the difference in survival (60±10% vs 46±9%) was not significant (P=0.29). The favourable influence of a short treatment time was further substantiated by demonstrating the importance of the gap between surgery and radiotherapy and the overall treatment time between surgery and end of radiotherapy. Early mucositis progressed more rapidly and was more severe in the accelerated hyperfractionation group; reflecting a faster rate of dose accumulation. Xerostomia was experienced by all patients with a tendency to be more severe after accelerated hyperfractionation. Fibrosis and oedema also tended to be more frequent after accelerated hyperfractionation and probably represent consequential reactions. Tpot showed a correlation with disease-free survival in a univariate analysis but did not prove to be an independent factor. Moreover, the use of the minimum and corrected P-values did not identify a significant cut-off. Compared to conventional fractionation, accelerated hyperfractionation did not seem to offer a survival advantage in fast tumours though a better local control rate was noted. This limits the use of Tpot as a guide for selecting patients for accelerated hyperfractionation. For slowly growing tumours, tumour control and survival probabilities were not significantly different in the conventional fractionation and accelerated hyperfractionation groups. A rapid tumour growth was associated with a higher risk of distant metastases (P=0.01). In conclusion, tumour cell repopulation seems to be an important determinant of postoperative radiotherapy of locally advanced head and neck cancer despite lack of a definite association between Tpot and treatment outcome. In fast growing tumours accelerated hyperfractionation provided an improved local control but without a survival advantage. To gain a full benefit from treatment acceleration, the surgery-radiotherapy gap and the overall treatment time should not exceed 6 and 10 weeks respectively

    The reproductive potential of vitrifiedwarmed euploid embryos declines following repeated uterine transfers

    Get PDF
    Background Recurrent implantation failure (RIF) represents a vague clinical condition with an unclear diagnostic challenge that lacks solid scientific underpinning. Although euploid embryos have demonstrated consistent implantation capabilities across various age groups, a unanimous agreement regarding the advantages of preimplantation genetic testing for aneuploidy (PGT-A) in managing RIF is absent. The ongoing discussion about whether chromosomal aneuploidy in embryos significantly contributes to recurrent implantation failure remains unsettled. Despite active discussions in recent times, a universally accepted characterization of recurrent implantation failure remains elusive. We aimed in this study to measure the reproductive performance of vitrified-warmed euploid embryos transferred to the uterus in successive cycles. Methods This observational cohort study included women (n = 387) with an anatomically normal uterus who underwent oocyte retrieval for PGT-A treatment with at least one biopsied blastocyst, between January 2017 and December 2021 at a university-affiliated public fertility center. The procedures involved in this study included ICSI, blastocyst culture, trophectoderm biopsy and comprehensive 24-chromosome analysis of preimplantation embryos using Next Generation Sequencing (NGS). Women, who failed a vitrified-warmed euploid embryo transfer, had successive blastocyst transfer cycles (FET) for a total of three using remaining cryopreserved euploid blastocysts from the same oocyte retrieval cycle. The primary endpoints were sustained implantation rate (SIR) and live birth rate (LBR) per vitrified-warmed single euploid embryo. The secondary endpoints were mean euploidy rate (m-ER) per cohort of biopsied blastocysts from each patient, as well as pregnancy and miscarriage rates. Results The mean age of the patient population was 33.4 years (95% CI 32.8–33.9). A total of 1,641 embryos derived from the first oocyte retrieval cycle were biopsied and screened. We found no associations between the m-ER and the number of previous failed IVF cycles among different ranges of maternal age at oocyte retrieval (P = 0.45). Pairwise comparisons showed a significant decrease in the sustained implantation rate (44.7% vs. 30%; P = 0.01) and the livebirth rate per single euploid blastocyst (37.1% vs. 25%; P = 0.02) between the 1st and 3rd FET. The cumulative SIR and LBR after up to three successive single embryo transfers were 77.1% and 68.8%, respectively. We found that the live birth rate of the first vitrified-warmed euploid blastocyst transferred decreased significantly with the increasing number of previously failed IVF attempts by categories (45.3% vs. 35.8% vs. 27.6%; P = 0.04). A comparable decrease in sustained implantation rate was also observed but did not reach statistical significance (50% vs. 44.2 vs. 37.9%; P = NS). Using a logistic regression model, we confirmed the presence of a negative association between the number of previous IVF failed attempts and the live birth rate per embryo transfer cycle (OR = 0.76; 95% CI 0.62–0.94; P = 0.01). Conclusions These findings are vital for enhancing patient counseling and refining management strategies for individuals facing recurrent implantation failure. By tailoring interventions based on age and ovarian reserve, healthcare professionals can offer more personalized guidance, potentially improving the overall success rates and patient experiences in fertility treatments

    Open Pit Mining

    Get PDF
    Open pit mining method is one of the surface mining methods that has a traditional cone-shaped excavation and is usually employed to exploit a near-surface, nonselective and low-grade zones deposits. It often results in high productivity and requires large capital investments, low operating costs, and good safety conditions. The main topics that will be discussed in this chapter will include an introduction into the general features of open pit mining, ore body characteristics and configurations, stripping ratios and stripping overburden methods, mine elements and parameters, open pit operation cycle, pit slope angle, stability of mine slopes, types of highwall failures, mine closure and reclamation, and different variants of surface mining methods including opencast mining, mountainous mining, and artisan mining
    • …
    corecore