1,148 research outputs found
Techniques for Production of Large Area Graphene for Electronic and Sensor Device Applications
AbstractHere we review commonly used techniques for the production of large area and high quality graphene to meet the requirements of industrial applications, including epitaxial growth on SiC, chemical vapour deposition (CVD) on transition metals and growth from solid carbon source. The review makes a comparison of the growth mechanisms, quality (such as mobility and homogeneity) and properties of the resultant graphene, limitations and the prospect of each production method. A particular focus of the review is on direct (transfer free) growth on dielectric substrate as this is potentially one of the promising techniques for graphene production which can readily be integrated into existing semiconductor fabrication processes.</jats:p
Influence of nitrogen sources on production of βb-galactosidase by Aspergillus niger
The study was undertaken to enhance the production of b-galactosidase using five organic nitrogen sources with wheat bran as a substrate under solid state fermentation. The microbial source Aspergillus niger and its DG-resistant mutant that were grown in medium with initial pH of 5.5 in 250 ml flasks at 30°C for 144 h and sample was harvested after every 24 h and analysed for substrate consumption, cell mass formation and enzyme production. All the nitrogen sources, ammonium sulphate, corn steep liquor, diammonium phosphate, fish meal and urea showed significant results. However, higher values of enzyme activity of 168.0 and 371.15 IU/l/h, parent and mutant, respectively, was obtained from sample in which corn steep liquor was used as a nitrogen source as compared tocontrol (73.1 and 176.3 IU/l/h in parent and mutant, respectively). The effect of nitrogen sources was also found significant in both the organisms but higher in mutant organism (2.2 fold). It is concluded that enzyme production enhanced 2.7 fold by use of suitable production medium under optimum cultural conditions and that the mutant derivative of A. niger can be exploited for hyper production of this enzyme
Small-Scale Fluidized Bed Bioreactor for Long-Term Dynamic Culture of 3D Cell Constructs and in vitro Testing
With the increasing interest in three-dimensional (3D) cell constructs that better represent native tissues, comes the need to also invest in devices, i.e., bioreactors, that provide a controlled dynamic environment similar to the perfusion mechanism observed in vivo. Here a laboratory-scale fluidized bed bioreactor (sFBB) was designed for hydrogel (i.e., alginate) encapsulated cells to generate a dynamic culture system that produced a homogenous milieu and host substantial biomass for long-term evolution of tissue-like structures and āper cellā performance analysis. The bioreactor design, conceptualized through scale-down empirical similarity rules, was initially validated through computational fluid dynamics analysis for the distributor capacity of homogenously dispersing the flow with an average fluid velocity of 4.596 Ć 10ā4 m/s. Experimental tests then demonstrated a consistent fluidization of hydrogel spheres, while maintaining shape and integrity (606.9 Ā± 99.3 Ī¼m diameter and 0.96 shape factor). It also induced mass transfer in and out of the hydrogel at a faster rate than static conditions. Finally, the sFBB sustained culture of alginate encapsulated hepatoblastoma cells for 12 days promoting proliferation into highly viable (>97%) cell spheroids at a high final density of 27.3 Ā± 0.78 million cells/mL beads. This was reproducible across multiple units set up in parallel and operating simultaneously. The sFBB prototype constitutes a simple and robust tool to generate 3D cell constructs, expandable into a multi-unit setup for simultaneous observations and for future development and biological evaluation of in vitro tissue models and their responses to different agents, increasing the complexity and speed of R&D processes
Graphene oxide biopolymer aerogels for the removal of lead from drinking water using a novel nano-enhanced ion exchange cascade
Transport conductivity of graphene at RF and microwave frequencies
We measure graphene coplanar waveguides from direct current (DC) to 13.5GHz
and show that the apparent resistance (in the presence of parasitic impedances)
has an quadratic frequency dependence, but the intrinsic conductivity (without
the influence of parasitic impedances) is frequency-independent. Consequently,
in our devices the real part of the complex alternating current conductivity is
the same as the DC value and the imaginary part~0. The graphene channel is
modelled as a parallel resistive-capacitive network with a frequency dependence
identical to that of the Drude conductivity with momentum relaxation
time~2.1ps, highlighting the influence of alternating current (AC) electron
transport on the electromagnetic properties of graphene. This can lead to
optimized design of high-speed analogue field-effect transistors, mixers,
frequency doublers, low-noise amplifiers and radiation detectors
RF Transport Electromagnetic Properties of Graphene from DC to 110 MHz
The paper describes measurement of RF transport electromagnetic properties of CVD graphene over the DC to 110 MHz frequency range at room temperature. Graphene on Si/SiO2 substrate was mounted in a shielded four terminal-pair (4TP) adaptor which enabled direct connection to a calibrated precision impedance analyser for measurements. Good agreement is observed for the DC four-probe resistance and the 4TP resistance at 40 Hz, both yielding R ~104 Ohms. In general the apparent graphene channel electromagnetic properties are found to be strongly influenced by quantum contact effects, such as resistance and capacitance, particularly at DC and low frequencies f < 1 MHz. A phenomenological lumped-parameter equivalent circuit model is presented which matches the frequency response of the graphene 4TP impedance device over approximately seven decades of the frequency range of the applied transport alternating current. Based on this model, the intrinsic graphene channel resistance is found to be RG = 2.2 Ohms or sheet resistance of 3.85 Ohms/sq, which is frequency independent, with each contact impedance being RC = 51.6 Ohms and CC = 1.2 nF. These results suggest that our RF 4TP method may be more accurate and reliable than the conventional DC four-probe method for measuring the intrinsic sheet resistance of single-atom thick materials such as graphene. This may be significant for the production and optimisation of graphene for solar-cells and touch-screen displays where sheet resistance (combined with its optical transparency) figures-of-merit play an important role, particularly in comparison with the values of the current material of choice, indium tin oxide (ITO), for such applications
Self-Sensing Surface Plasmon Resonance for the Detection of Metallic Nanoparticles
Surface plasmon resonance (SPR) is an established technique for label free sensing of bio-molecular species, including time-dependent reaction analysis. Unlike previous research by other workers, who have used gold or silver nanoparticles to enhance sensitivity by inducing LSPR, this study involves the theoretical development of a Localised SPR (LSPR) system where a glass prism is considered with multilayer films to enable the detection of metallic nanoparticles. Silver nanoparticles with a volume concentration 0.25 % can be clearly detected from both amplitude and phase, according to the results of these simulations. The model presented is rigorous in that it accounts for the effect of the Cr or Ti adhesion layers together with a graphene layer at the metal-sensing interface. This enables the direct detection of the presence of nanoparticles from their plasmonic amplitude and phase (self-sensing). Our model also demonstrates that the sensitivity of the sensors can be significantly improved with the introduction of graphene layers
Sensitivity Comparison of Macro- and Micro-Electrochemical Biosensors for Human Chorionic Gonadotropin (hCG) Biomarker Detection
Selectivity and sensitivity are important figures of merit in the design and optimization of electrochemical biosensors. The efficiency of a fabricated immunosensing surface can easily be influenced by several factors, such as the detection limit, non-specific binding, and type of sensing platform. Here, we demonstrate the effects of macro- and micro-sized planner working electrodes (4 mm and 400 Ī¼m diameter, respectively) on electrochemical behavior and the ability of the developed biosensor to detect human chorionic gonadotropin (hCG), which is a biomarker of several tumors. The fabricated screen-printed sensor was constructed by modifying the carbon macroand micro-electrodes with a linker, 1-pyrenebutyric acid-N-hydroxy-succinimide ester (PANHS), and immobilization of anti-hCG antibodies to specifically detect the hCG protein. The characterization of the developed electrodes was performed by cyclic voltammetry (CV) and square wave voltammetry (SWV). Each immunosensing system showed unique electrochemical behavior, which might be attributed to the arrangement of particles on the surface. However, a smaller microelectrode surface area was found to show higher sensitivity (1 pg/mL) compared to the macro-electrode sensor with a lower detection limit of 100 pg/mL. Further, Raman spectroscopy analysis confirmed that the micro-electrode had a relatively low density of defects and disorder compared to the macro-electrode. The proposed assay represents a promising approach that is highly effective for specific detection of an analyte and can be exploited to target biomarkers for a variety of point-of-care diagnostic applications
Graphene FET Sensors for Alzheimerās Disease Protein Biomarker Clusterin Detection
We report on the fabrication and characterisation of graphene field-effect transistor (GFET) biosensors for the detection of Clusterin, a prominent protein biomarker of Alzheimerās disease (AD). The GFET sensors were fabricated on Si/SiO2 substrate using photolithographic patterning and metal lift-off techniques with evaporated chromium and sputtered gold contacts. Raman Spectroscopy was performed on the devices to determine the quality of the graphene. The GFETs were annealed to improve their performance before the channels were functionalized by immobilising the graphene surface with linker molecules and anti-Clusterin antibodies. Concentration of linker molecules was also independently verified by absorption spectroscopy using the highly collimated micro-beam light of Diamond B23 beamline. The detection was achieved through the binding reaction between the antibody and varying concentrations of Clusterin antigen from 1 to 100 pg/mL, as well as specificity tests using human chorionic gonadotropin (hCG), a glycoprotein risk biomarker of certain cancers. The GFETs were characterized using direct current (DC) 4-probe electrical resistance (4-PER) measurements, which demonstrated a limit of detection of the biosensors to be ā¼ 300 fg/mL (4 fM). Comparison with back-gated Dirac voltage shifts with varying concentration of Clusterin show 4-PER measurements to be more accurate, at present, and point to a requirement for further optimisation of the fabrication processes for our next generation of GFET sensors. Thus, we have successfully fabricated a promising set of GFET biosensors for the detection of Clusterin protein biomarker. The developed GFET biosensors are entirely generic and also have the potential to be applied to a variety of other disease detection applications such as Parkinsonās, cancer, and cardiovascular.</jats:p
Hepatitis B virus infection among different sex and age groups in Pakistani Punjab
<p>Abstract</p> <p>Background</p> <p>Hepatitis B virus (HBV) infection is a serious health problem in the developing countries including Pakistan. Various risk factors are responsible for the spread of this infectious disease. Prevalence of HBV infection in apparently suspected individual of Punjab province of Pakistan was analyzed during January 2008 to December 2010. Current study was aimed to investigate the epidemiology and risk factors of HBV infection.</p> <p>Methodology</p> <p>Four thousand eight hundred and ninety patients suffering from chronic liver disease were screened for the presence of HBV DNA using qualitative Real Time PCR methodology to confirm their status of infection. A predesigned standard questionnaire was filled for all the patients that included information about the possible risk factors.</p> <p>Results</p> <p>A total of 4890 ELISA positive patients were screened for Hepatitis B virus infection. Of these 3143 were positive for HBV, includes 68.15% males and 31.85% females. Male were observed to be more frequently infected as compared to the female with a positivity ratio of 2.14: 1. The rate of infection increases with the passage of time in the course of three years. Highest frequency of infection was found in the age of 21-30 was 34.93% followed by 23.83% in 31-40. Only (13.39%) were belonging to the age group 11-20 year. The rate of infection declines with increasing age as shown by age groups 41-50 (16.13%) and 51-60 (7.09%). While children aged 0-10 and very old >60 age groups were very less frequently 1.49% and 1.65% infected respectively. Important risk factors contributing to HBV spread include barber risk (23.60%), blood transfusion (4.04%), History of injection 26.19%, Reuse of syringes 26.60%, dental risk (11.20%) and surgical procedure (4.26%). Among the entire respondents trend sharing personal items was very common. History of injection, barber risk, surgery and dental procedure and reuse of syringes appear as major risk factors for the transmission.</p> <p>Conclusion</p> <p>Male were more frequently exposed to the risk factors as compared to female. Similarly the younger age group had high rate of infection as compared to the children's and the older age groups. Reuse of syringes', barber risk and History of injection were main risk identified during the present study. To lower HBV transmission rate Government should take aggressive steps towards massive awareness and vaccination programs to decrease the burden of HBV from the Punjab province of Pakistan.</p
- ā¦