13,229 research outputs found
A program continuation to develop processing procedures for advanced silicon solar cells
Shallow junctions, aluminum back surface fields and tantalum pentoxide (Ta205) antireflection coatings coupled with the development of a chromium-palladium-silver contact system, were used to produce a 2 x 4 cm wraparound contact silicon solar cell. One thousand cells were successfully fabricated using batch processing techniques. These cells were 0.020 mm thick, with the majority (800) made from nominal ten ohm-cm silicon and the remainder from nominal 30 ohm-cm material. Unfiltered, these cells delivered a minimum AMO efficiency at 25 C of 11.5 percent and successfully passed all the normal in-process and acceptance tests required for space flight cells
Weight outcomes audit for 34,271 adults referred to a primary care/commercial weight management partnership scheme
Copyright © 2011 S. Karger AG, Basel.Peer reviewedPublisher PD
Development of processing procedures for advanced silicon solar cells
Ten ohm-cm silicon solar cells, 0.2 mm thick, were produced with short circuit current efficiencies up to thirteen percent and using a combination of recent technical advances. The cells were fabricated in conventional and wraparound contact configurations. Improvement in cell collection efficiency from both the short and long wavelengths region of the solar spectrum was obtained by coupling a shallow junction and an optically transparent antireflection coating with back surface field technology. Both boron diffusion and aluminum alloying techniques were evaluated for forming back surface field cells. The latter method is less complicated and is compatible with wraparound cell processing
Design and fabrication of wraparound contact silicon solar cells
Both dielectric insulation and etched junction contact techniques were evaluated for use in wraparound contact cell fabrication. Since a suitable process for depositing the dielectrics was not achieved, the latter approach was taken. The relationship between loss of back contact and power degradation due to increased series resistance was established and used to design a simple contact configuration for 10 ohm-cm etched wraparound junction contact N/P cells. A slightly deeper junction significantly improved cell curve shape and the associated loss of current was regained by using thinner contact grid fingers. One thousand cells with efficiencies greater than 10.5% were fabricated to demonstrate the process
Oscillating Starless Cores: The Nonlinear Regime
In a previous paper, we modeled the oscillations of a thermally-supported
(Bonnor-Ebert) sphere as non-radial, linear perturbations following a standard
analysis developed for stellar pulsations. The predicted column density
variations and molecular spectral line profiles are similar to those observed
in the Bok globule B68 suggesting that the motions in some starless cores may
be oscillating perturbations on a thermally supported equilibrium structure.
However, the linear analysis is unable to address several questions, among them
the stability, and lifetime of the perturbations. In this paper we simulate the
oscillations using a three-dimensional numerical hydrodynamic code. We find
that the oscillations are damped predominantly by non-linear mode-coupling, and
the damping time scale is typically many oscillation periods, corresponding to
a few million years, and persisting over the inferred lifetime of gobules.Comment: 7 pages, 7 figures, accepted by Ap
Adding Bricks to Clicks: The Contingencies Driving Cannibalization and Complementarity in Multichannel Retailing
This paper empirically explores the contingencies that drive cannibalizing and complementary effects across channels to provide sales forecasting, promotion planning, and customer relationship management guidance to multichannel managers. We investigate three contingencies in a sales analysis of a leading U.S. retailer who adds a new retail store channel to existing catalog and online channels. We show that the emergence and strength of cannibalizing and complementary effects varies over time, across type of channel, and by type of customer, and provide insight into when and where managers can expect these effects to dominate and how to counter cannibalization and promote complementarity across channels. We find that opening retail stores cannibalizes sales in the catalog and online channels in the short term, but produces complementary effects in both channels in the long term; cannibalization is magnified in the catalog channel, while complementarity is magnified in the online channel. Customer analysis suggests that opening retail stores paves the way for higher rates of customer acquisition and higher rates of repeat purchasing among existing customers in the direct channels in the long term.Multichannel Retailing, Channels of Distribution, Direct Marketing, E-commerce, Channel Management
A review of human factors principles for the design and implementation of medication safety alerts in clinical information systems.
The objective of this review is to describe the implementation of human factors principles for the design of alerts in clinical information systems. First, we conduct a review of alarm systems to identify human factors principles that are employed in the design and implementation of alerts. Second, we review the medical informatics literature to provide examples of the implementation of human factors principles in current clinical information systems using alerts to provide medication decision support. Last, we suggest actionable recommendations for delivering effective clinical decision support using alerts. A review of studies from the medical informatics literature suggests that many basic human factors principles are not followed, possibly contributing to the lack of acceptance of alerts in clinical information systems. We evaluate the limitations of current alerting philosophies and provide recommendations for improving acceptance of alerts by incorporating human factors principles in their design
Hyperspherical harmonics with arbitrary arguments
The derivation scheme for hyperspherical harmonics (HSH) with arbitrary
arguments is proposed. It is demonstrated that HSH can be presented as the
product of HSH corresponding to spaces with lower dimensionality multiplied by
the orthogonal (Jacobi or Gegenbauer) polynomial. The relation of HSH to
quantum few-body problems is discussed. The explicit expressions for
orthonormal HSH in spaces with dimensions from 2 to 6 are given. The important
particular cases of four- and six-dimensional spaces are analyzed in detail and
explicit expressions for HSH are given for several choices of hyperangles. In
the six-dimensional space, HSH representing the kinetic energy operator
corresponding to i) the three-body problem in physical space and ii) four-body
planar problem are derived.Comment: 18 pages, 1 figur
Empirical wind model for the middle and lower atmosphere. Part 1: Local time average
The HWM90 thermospheric wind model was revised in the lower thermosphere and extended into the mesosphere and lower atmosphere to provide a single analytic model for calculating zonal and meridional wind profiles representative of the climatological average for various geophysical conditions. Gradient winds from CIRA-86 plus rocket soundings, incoherent scatter radar, MF radar, and meteor radar provide the data base and are supplemented by previous data driven model summaries. Low-order spherical harmonics and Fourier series are used to describe the major variations throughout the atmosphere including latitude, annual, semiannual, and longitude (stationary wave 1). The model represents a smoothed compromise between the data sources. Although agreement between various data sources is generally good, some systematic differences are noted, particularly near the mesopause. Root mean square differences between data and model are on the order of 15 m/s in the mesosphere and 10 m/s in the stratosphere for zonal wind, and 10 m/s and 4 m/s, respectively, for meridional wind
Virtual Data in CMS Analysis
The use of virtual data for enhancing the collaboration between large groups
of scientists is explored in several ways:
- by defining ``virtual'' parameter spaces which can be searched and shared
in an organized way by a collaboration of scientists in the course of their
analysis;
- by providing a mechanism to log the provenance of results and the ability
to trace them back to the various stages in the analysis of real or simulated
data;
- by creating ``check points'' in the course of an analysis to permit
collaborators to explore their own analysis branches by refining selections,
improving the signal to background ratio, varying the estimation of parameters,
etc.;
- by facilitating the audit of an analysis and the reproduction of its
results by a different group, or in a peer review context.
We describe a prototype for the analysis of data from the CMS experiment
based on the virtual data system Chimera and the object-oriented data analysis
framework ROOT. The Chimera system is used to chain together several steps in
the analysis process including the Monte Carlo generation of data, the
simulation of detector response, the reconstruction of physics objects and
their subsequent analysis, histogramming and visualization using the ROOT
framework.Comment: Talk from the 2003 Computing in High Energy and Nuclear Physics
(CHEP03), La Jolla, Ca, USA, March 2003, 9 pages, LaTeX, 7 eps figures. PSN
TUAT010. V2 - references adde
- …