Database for CO2 separation performances of MOFs based on computational materials screening

Metal-organic frameworks (MOFs) are potential adsorbents for CO2 capture. Because thousands of MOFs exist, computational studies become very useful in identifying the top performing materials for target applications in a time-effective manner. In this study, molecular simulations were performed to screen the MOF database to identify the best materials for CO2 separation from flue gas (CO2/N-2) and landfill gas (CO2/CH4) under realistic operating conditions. We validated the accuracy of our computational approach by comparing the simulation results for the CO2 uptakes, CO2/N-2 and CO2/CH4 selectivities of various types of MOFs with the available experimental data. Binary CO2/N-2 and CO2/CH4 mixture adsorption data were then calculated for the entire MOF database. These data were then used to predict selectivity, working capacity, regenerability, and separation potential of MOFs. The top performing MOF adsorbents that can separate CO2/N-2 and CO2/CH4 with high performance were identified. Molecular simulations for the adsorption of a ternary CO2/N-2/CH4 mixture were performed for these top materials to provide a more realistic performance assessment of MOF adsorbents. The structure-performance analysis showed that MOFs with Delta Q(st)(0) > 30 kJ/mol, 3.8 angstrom 1 g/cm(3) are the best candidates for selective separation of CO2 from flue gas and landfill gas. This information will be very useful to design novel MOFs exhibiting high CO2 separation potentials. Finally, an online, freely accessible database https://cosmoserc.ku.edu.tr was established, for the first time in the literature, which reports all of the computed adsorbent metrics of 3816 MOFs for CO2/N-2, CO2/CH4, and CO2/N-2/CH4 separations in addition to various structural properties of MOFs.European Research Counci

A PCE-based rheology modifier allows machining of solid cast green bodies of alumina

The performance of a poly(carboxylate ether) (PCE)-based superplasticizer to enable the machining of green bodies that are solid cast from suspensions of alumina was investigated. An alumina loading of 35 vol% in the presence of 1.25 wt% superplasticizer was established to be suitable for lathing and removal of significant amount of material through drilling. A reduction of 77% in the diameter of green bodies that corresponds to a 59% reduction in volume was achieved. The lathed green bodies exhibited smooth terraces without visible cracks. All of the green bodies were sintered without a polymer burnout step

Computationally guided synthesis of a hierarchical [4[2+3]+6] porous organic ‘cage of cages’

Here we report a two-step, hierarchical synthesis that assembles a trigonal prismatic organic cage into a more symmetric, higher-order tetrahedral cage, or ‘cage of cages’. Both the preformed [2+3] trigonal prismatic cage building blocks and the resultant tetrahedral [4[2+3]+6]cage molecule are constructed using ether bridges. This strategy affords the [4[2+3]+6]cage molecule excellent hydrolytic stability that is not a feature of more common dynamic cage linkers, such as imines. Despite its relatively high molar mass (3,001 g mol−1), [4[2+3]+6]cage exhibits good solubility and crystallizes into a porous superstructure with a surface area of 1,056 m2 g−1. By contrast, the [2+3] building block is not porous. The [4[2+3]+6]cage molecule shows high CO2 and SF6 uptakes due to its polar skeleton. The preference for the [4[2+3]+6]cage molecule over other cage products can be predicted by computational modelling, as can its porous crystal packing, suggesting a broader design strategy for the hierarchical assembly of organic cages with synthetically engineered functions. (Figure presented.)</p

Computationally guided synthesis of a hierarchical [4[2 + 3] + 6] porous organic ‘cage of cages’

Here we report a two-step, hierarchical synthesis that assembles a trigonal prismatic organic cage into a more symmetric, higher-order tetrahedral cage, or ‘cage of cages’. Both the preformed [2+3] trigonal prismatic cage building blocks and the resultant tetrahedral [4[2+3]+6]cage molecule are constructed using ether bridges. This strategy affords the [4[2+3]+6]cage molecule excellent hydrolytic stability that is not a feature of more common dynamic cage linkers, such as imines. Despite its relatively high molar mass (3,001 g mol −1), [4[2+3]+6]cage exhibits good solubility and crystallizes into a porous superstructure with a surface area of 1,056 m 2 g −1. By contrast, the [2+3] building block is not porous. The [4[2+3]+6]cage molecule shows high CO 2 and SF 6 uptakes due to its polar skeleton. The preference for the [4[2+3]+6]cage molecule over other cage products can be predicted by computational modelling, as can its porous crystal packing, suggesting a broader design strategy for the hierarchical assembly of organic cages with synthetically engineered functions. (Figure presented.)</p