137 research outputs found
Controlling Cherenkov angles with resonance transition radiation
Cherenkov radiation provides a valuable way to identify high energy particles
in a wide momentum range, through the relation between the particle velocity
and the Cherenkov angle. However, since the Cherenkov angle depends only on
material's permittivity, the material unavoidably sets a fundamental limit to
the momentum coverage and sensitivity of Cherenkov detectors. For example, Ring
Imaging Cherenkov detectors must employ materials transparent to the frequency
of interest as well as possessing permittivities close to unity to identify
particles in the multi GeV range, and thus are often limited to large gas
chambers. It would be extremely important albeit challenging to lift this
fundamental limit and control Cherenkov angles as preferred. Here we propose a
new mechanism that uses constructive interference of resonance transition
radiation from photonic crystals to generate both forward and backward
Cherenkov radiation. This mechanism can control Cherenkov angles in a flexible
way with high sensitivity to any desired range of velocities. Photonic crystals
thus overcome the severe material limit for Cherenkov detectors, enabling the
use of transparent materials with arbitrary values of permittivity, and provide
a promising option suited for identification of particles at high energy with
enhanced sensitivity.Comment: There are 16 pages and 4 figures for the manuscript. Supplementary
information with 18 pages and 5 figures, appended at the end of the file with
the manuscript. Source files in Word format converted to PDF. Submitted to
Nature Physic
Monodisperse Hollow Tricolor Pigment Particles for Electronic Paper
A general approach has been designed to blue, green, and red pigments by metal ions doping hollow TiO 2. The reaction involves initial formation of PS at TiO2 core–shell nanoparticles via a mixed-solvent method, and then mixing with metal ions solution containing PEG, followed calcining in the atmosphere. The as-prepared hollow pigments exhibit uniform size, bright color, and tunable density, which are fit for electronic paper display
Synthesis and Application of Carbon–Iron Oxide Microspheres’ Black Pigments in Electrophoretic Displays
Carbon–iron oxide microspheres’ black pigments (CIOMBs) had been prepared via ultrasonic spray pyrolysis of aqueous solutions containing ferrous chloride and glucose. Due to the presence of carbon, CIOMBs not only exhibited remarkably acid resistance, but also could be well dispersed in both polar solvents and nonpolar solvent. Finally, dispersions of hollow CIOMBs in tetrachloroethylene had successfully been applied in electrophoretic displays
Secular Evolution and the Formation of Pseudobulges in Disk Galaxies
We review internal processes of secular evolution in galaxy disks,
concentrating on the buildup of dense central features that look like
classical, merger-built bulges but that were made slowly out of disk gas. We
call these pseudobulges. As an existence proof, we review how bars rearrange
disk gas into outer rings, inner rings, and gas dumped into the center. In
simulations, this gas reaches high densities that plausibly feed star
formation. In the observations, many SB and oval galaxies show central
concentrations of gas and star formation. Star formation rates imply plausible
pseudobulge growth times of a few billion years. If secular processes built
dense central components that masquerade as bulges, can we distinguish them
from merger-built bulges? Observations show that pseudobulges retain a memory
of their disky origin. They have one or more characteristics of disks: (1)
flatter shapes than those of classical bulges, (2) large ratios of ordered to
random velocities indicative of disk dynamics, (3) small velocity dispersions,
(4) spiral structure or nuclear bars in the bulge part of the light profile,
(5) nearly exponential brightness profiles, and (6) starbursts. These
structures occur preferentially in barred and oval galaxies in which secular
evolution should be rapid. So the cleanest examples of pseudobulges are
recognizable. Thus a large variety of observational and theoretical results
contribute to a new picture of galaxy evolution that complements hierarchical
clustering and merging.Comment: 92 pages, 21 figures in 30 Postscript files; to appear in Annual
Review of Astronomy and Astrophysics, Vol. 42, 2004, in press; for a version
with full resolution figures, see
http://chandra.as.utexas.edu/~kormendy/ar3ss.htm
No evidence for cardiac dysfunction in Kif6 mutant mice.
A KIF6 variant in man has been reported to be associated with adverse cardiovascular outcomes after myocardial infarction.
No clear biological or physiological data exist for Kif6. We sought to investigate the impact of a deleterious KIF6 mutation on
cardiac function in mice. Kif6 mutant mice were generated and verified. Cardiac function was assessed by serial
echocardiography at baseline, after ageing and after exercise. Lipid levels were also measured. No discernable adverse lipid
or cardiac phenotype was detected in Kif6 mutant mice. These data suggest that dysfunction of Kif6 is linked to other more
complex biological/biochemical parameters or is unlikely to be of material consequence in cardiac function
Ultra-fast responsive colloidal-polymer composite-based volatile organic compounds (VOC) sensor using nanoscale easy tear process
There is an immense need for developing a simple, rapid, and inexpensive detection assay for health-care applications or monitoring environments. To address this need, a photonic crystal (PC)-based sensor has been extensively studied due to its numerous advantages such as colorimetric measurement, high sensitivity, and low cost. However, the response time of a typical PC-based sensor is relatively slow due to the presence of the inevitable upper residual layer in colloidal structures. Hence, we propose an ultra-fast responsive PC-based volatile organic compound (VOC) sensor by using a "nanoscale easy tear (NET) process" inspired by commercially available "easy tear package". A colloidal crystal-polydimethylsiloxane (PDMS) composite can be successfully realized through nanoscale tear propagation along the interface between the outer surface of crystallized nanoparticles and bulk PDMS. The response time for VOC detection exhibits a significant decrease by allowing the direct contact with VOCs, because of perfect removal of the residual on the colloidal crystals. Moreover, vapor-phase VOCs can be monitored, which had been previously impossible. High-throughput production of the patterned colloidal crystal-polymer composite through the NET process can be applied to other multiplexed selective sensing applications or may be used for nanomolding templates
Inkjet Printing Based Mono-layered Photonic Crystal Patterning for Anti-counterfeiting Structural Colors
Photonic crystal structures can be created to manipulate electromagnetic waves so that many studies have focused on designing photonic band-gaps for various applications including sensors, LEDs, lasers, and optical fibers. Here, we show that mono-layered, self-assembled photonic crystals (SAPCs) fabricated by using an inkjet printer exhibit extremely weak structural colors and multiple colorful holograms so that they can be utilized in anti-counterfeit measures. We demonstrate that SAPC patterns on a white background are covert under daylight, such that pattern detection can be avoided, but they become overt in a simple manner under strong illumination with smartphone flash light and/or on a black background, showing remarkable potential for anti-counterfeit techniques. Besides, we demonstrate that SAPCs yield different RGB histograms that depend on viewing angles and pattern densities, thus enhancing their cryptographic capabilities. Hence, the structural colorations designed by inkjet printers would not only produce optical holograms for the simple authentication of many items and products but also enable a high-secure anti-counterfeit techniqueope
The Association between Conduct Problems and the Initiation and Progression of Marijuana Use during Adolescence: A Genetic Analysis across Time
The present study used a prospective, longitudinal design to investigate genetic and environmental influences on the association between earlier conduct problems and the initiation and progression of marijuana use during adolescence. Parent- and teacher-reported conduct problems assessed at Time 1 (1996) and self-reported marijuana use assessed at Time 2 (2004) were available for 1088 adolescent twin pairs participating in the Cardiff Study of All Wales and North West of England Twins (CaStANET). Using a novel approach to the modeling of initiation and progression dimensions in substance use, findings suggested that the initiation of marijuana use in adolescence was influenced by genetic, common and unique environmental factors. The progression (or frequency) of marijuana use was influenced by genetic and unique environmental factors. Findings for conduct problems indicated that while the presence or absence of conduct problems was largely heritable, the relative severity of conduct problems appeared to be more strongly environmentally influenced. Multivariate model fitting indicated that conduct problems in childhood and early adolescence made a small but significant contribution to the risk for marijuana use 8 years later
A Common KIF6 Polymorphism Increases Vulnerability to Low-Density Lipoprotein Cholesterol: Two Meta-Analyses and a Meta-Regression Analysis
Background: We sought to determine if a common polymorphism can influence vulnerability to LDL cholesterol, and thereby influence the clinical benefit derived from therapies that reduce LDL cholesterol. Methods: We conducted a meta-analysis of the association between a common Trp719Arg polymorphism in the kinesin-like protein 6 (KIF6) gene and the risk of cardiovascular disease (CVD), and a meta-regression analysis to measure the effect modification of this polymorphism on the association between LDL cholesterol and the risk of CVD. We used this measure of genetic effect modification to predict the expected difference in clinical benefit among KIF6 719Arg allele carriers and non-carriers in response to therapies that reduce LDL cholesterol. We then conducted a meta-analysis of statin trials to compare the expected difference in clinical benefit with the observed difference during treatment with a statin. Results: In a meta-analysis involving 144,931 participants, the KIF6 719Arg allele was not associated with the relative risk (RR) of CVD (RR: 1.02, 95%CI: 0.98-1.07, p = 0.288). Meta-regression analysis involving 88,535 participants, however, showed that the 719Arg allele appears to influence the effect of LDL cholesterol on the risk of CVD. KIF6 carriers experienced a 13% greater reduction in the risk of CVD per mmol/L decrease in LDL cholesterol than non-carriers. We interpreted this difference as the expected difference in clinical benefit among KIF6 carriers and non-carriers in response to therapies that lower LDL cholesterol. The difference in clinical benefit predicted by the increased vulnerability to LDL cholesterol among KIF6 carriers (ratio of RR: 0.87, 95%CI: 0.80-0.94, p = 0.001) agreed very closely with the observed difference among 50,060 KIF6 carriers and non-carriers enrolled in 8 randomized trials of statin therapy (ratio of RR: 0.87, 95%CI: 0.77-0.99, p = 0.038). Conclusion: The KIF6 719Arg allele increases vulnerability to LDL cholesterol and thereby influences the expected clinical benefit of therapies that reduce LDL cholesterol. © 2011 Ference et al
- …