Severe storm electricity

Successful ground truth support of U-2 overflights was been accomplished. Data have been reduced for 4 June 1984 and some of the results have been integrated into some of MSFC's efforts. Staccato lightning (multiply branched, single stroke flash with no continuing current) is prevalent within the rainfree region around the main storm updraft and this is believed to be important, i.e., staccato flashes might be an important indicator of severe storm electrification. Results from data analysis from two stations appear to indicate that charge center heights can be estimated from a combination of intercept data with data from the fixed laboratory at NSSL. An excellent data base has been provided for determining the sight errors and efficiency of NSSL's LLP system. Cloud structures, observable in a low radar reflectivity region and on a scale smaller than is currently resolved by radar, which appear to be related to electrical activity are studied

Spatial grouping resolves ambiguity to drive temporal recalibration.

Cross-modal temporal recalibration describes a shift in the point of subjective simultaneity (PSS) between 2 events following repeated exposure to asynchronous cross-modal inputs-the adaptors. Previous research suggested that audiovisual recalibration is insensitive to the spatial relationship between the adaptors. Here we show that audiovisual recalibration can be driven by cross-modal spatial grouping. Twelve participants adapted to alternating trains of lights and tones. Spatial position was manipulated, with alternating sequences of a light then a tone, or a tone then a light, presented on either side of fixation (e.g., left tone-left light-right tone-right light, etc.). As the events were evenly spaced in time, in the absence of spatial-based grouping it would be unclear if tones were leading or lagging lights. However, any grouping of spatially colocalized cross-modal events would result in an unambiguous sense of temporal order. We found that adapting to these stimuli caused the PSS between subsequent lights and tones to shift toward the temporal relationship implied by spatial-based grouping. These data therefore show that temporal recalibration is facilitated by spatial grouping. (PsycINFO Database Record (c) 2011 APA, all rights reserved)

Neural correlates of subjective timing precision and confidence

Humans perceptual judgments are imprecise, as repeated exposures to the same physical stimulation (e.g. audio-visual inputs separated by a constant temporal offset) can result in different decisions. Moreover, there can be marked individual differences – precise judges will repeatedly make the same decision about a given input, whereas imprecise judges will make different decisions. The causes are unclear. We examined this using audio-visual (AV) timing and confidence judgments, in conjunction with electroencephalography (EEG) and multivariate pattern classification analyses. One plausible cause of differences in timing precision is that it scales with variance in the dynamics of evoked brain activity. Another possibility is that equally reliable patterns of brain activity are evoked, but there are systematic differences that scale with precision. Trial-by-trial decoding of input timings from brain activity suggested precision differences may not result from variable dynamics. Instead, precision was associated with evoked responses that were exaggerated (more different from baseline) ~300 ms after initial physical stimulations. We suggest excitatory and inhibitory interactions within a winner-take-all neural code for AV timing might exaggerate responses, such that evoked response magnitudes post-stimulation scale with encoding success

Helicopter main-rotor speed effects: A comparison of predicted ranges of detection from the aural detection program ICHIN and the electronic detection program ARCAS

NASA LaRC personnel have conducted a strudy of the predicted acoustic detection ranges associated with reduced helicopter main rotor speeds. This was accomplished by providing identical input information to both the aural detection program ICHIN 6, (I Can Hear It Now, version 6) and the electronic acoustic detection program ARCAS (Assessment of Rotorcraft Detection by Acoustics Sensing). In this study, it was concluded that reducing the main rotor speed of the helicopter by 27 percent reduced both the predicted aural and electronic detection ranges by approximately 50 percent. Additionally, ARCAS was observed to function better with narrowband spectral input than with one-third octave band spectral inputs and the predicted electronic range of acoustic detection is greater than the predicted aural detection range

Helicopter far-field acoustic levels as a function of reduced main-rotor advancing blade-tip Mach number

During the design of a helicopter, the weight, engine, rotor speed, and rotor geometry are given significant attention when considering the specific operations for which the helicopter will be used. However, the noise radiated from the helicopter and its relationship to the design variables is currently not well modeled with only a limited set of full-scale field test data to study. In general, limited field data have shown that reduced main-rotor advancing blade-tip Mach numbers result in reduced far-field noise levels. The status of a recent helicopter noise research project is reviewed. It is designed to provide flight experimental data which may be used to further understand helicopter main-rotor advancing blade-tip Mach number effects on far-field acoustic levels. Preliminary results are presented relative to tests conducted with a Sikorsky S-76A helicopter operating with both the rotor speed and the flight speed as the control variable. The rotor speed was operated within the range of 107 to 90 percent NR at nominal forward speeds of 35, 100, and 155 knots

Weld-brazing - a new joining process

A joining process designated weld brazing which combines resistance spot welding and brazing has been developed. Resistance spot welding is used to position and align the parts as well as to establish a suitable faying surface gap for brazing. Fabrication is then completed by capillary flow of the braze alloy into the joint. The process has been used successfully to fabricate Ti-6Al-4V titanium alloy joints using 3003 aluminum braze alloy. Test results obtained on single overlap and hat-stiffened structural specimens show that weld brazed joints are superior in tensile shear, stress rupture, fatigue, and buckling than joint fabricated by spotwelding or brazing. Another attractive feature of the process is that the brazed joints is hermetically sealed by the braze material

Bovine Malignant Catarrhal Fever

Malignant catarrhal fever (MCF) or malignant head catarrh has been recognized for over 125 years as a fatal disease of cattle and some wild ruminants. Found world wide, it is prevalent in Australia, the British Isles, Canada, the United States and Africa. The causative agent is believed to be a herpesvirus, but it is thought that tissue damage is the result of hypersensitivity to viral antigens and not direct effects of the virus

Lava flow morphology at an erupting andesitic stratovolcano: a satellite perspective on El Reventador, Ecuador

Lava flows pose a significant hazard to infrastructure and property located close to volcanoes, and understanding how flows advance is necessary to manage volcanic hazard during eruptions. Compared to low-silica basaltic flows, flows of andesite composition are infrequently erupted and so relatively few studies of their characteristics and behaviour exist. We use El Reventador, Ecuador as a target to investigate andesitic lava flow properties during a 4.5 year period of extrusive eruption between February 2012 and August 2016. We use satellite radar to map the dimensions of 43 lava flows and look at variations in their emplacement behaviour over time. We find that flows descend the north and south flanks of El Reventador, and were mostly emplaced during durations shorter than the satellite repeat interval of 24 days.Flows ranged in length from 0.3 to 1.7 km, and the length of these flows decreased over the observation period. We measure a decrease in flow volume with time that is correlated with a long-term exponential decrease in eruption rate, and propose that this behaviour is caused by temporary magma storage in the conduit acting as a melt capacitor between the magma reservoir and the surface. We use the dimensions of the flow levees and widths to estimate the flow yield strengths, which were of the order of 10-100 kPa. We observe that some flows were diverted by topographic obstacles, and compare measurements of decreased channel width and increased flow thickness at the obstacles with observations from laboratory experiments. Radar observations, such as those presented here, could be used to map and measure properties of evolving lava flow fields at other remote or difficult to monitor volcanoes