Contactless Quality Monitoring Sensor Based on Electrical Conductivity Measurements

A first prototype of a contactless conductivity sensor for AdBlue® quality monitoring is presented. Based on a detailed sensor mode analysis it is shown that capacitive sensors can be designed to sense electrical liquid conductivity. The sensor design process is based on a sensor model, which allows simulating capacitive senor responses for arbitrary electrode and liquid tank geometries. Finally, temperature induced errors are estimated

Activation-independent platelet adhesion and aggregation under elevated shear stress

Platelet aggregation, which contributes to bleeding arrest and also to thrombovascular disorders, is thought to initiate after signaling-induced activation. We found that this paradigm does not apply under blood flow conditions comparable to those existing in stenotic coronary arteries. Platelets interacting with immobilized von Willebrand factor (VWF) aggregate independently of activation when soluble VWF is present and the shear rate exceeds 10 000 s–1 (shear stress = 400 dyn/cm2). Above this threshold, active A1 domains become exposed in soluble VWF multimers and can bind to glycoprotein Ibα, promoting additional platelet recruitment. Aggregates thus formed are unstable until the shear rate approaches 20 000 s–1 (shear stress = 800 dyn/cm.2). Above this threshold, adherent platelets at the interface of surface-immobilized and membrane-bound VWF are stretched into elongated structures and become the core of aggregates that can persist on the surface for minutes. When isolated dimeric A1 domain is present instead of native VWF multimers, activation-independent platelet aggregation occurs without requiring shear stress above a threshold level, but aggregates never become firmly attached to the surface and progressively disaggregate as shear rate exceeds 6000 s–1. Platelet and VWF modulation by hydrodynamic force is a mechanism for activation-independent aggregation that may support thrombotic arterial occlusion

Mechanism of platelet adhesion to von Willebrand factor and microparticle formation under high shear stress

We describe here the mechanism of platelet adhesion to immobilized von Willebrand factor (VWF) and subsequent formation of platelet-derived microparticles mediated by glycoprotein Ibα (GPIbα) under high shear stress. As visualized in whole blood perfused in a flow chamber, platelet attachment to VWF involved one or few membrane areas of 0.05 to 0.1 μm2 that formed discrete adhesion points (DAPs) capable of resisting force in excess of 160 pN. Under the influence of hydrodynamic drag, membrane tethers developed between the moving platelet body and DAPs firmly adherent to immobilized VWF. Continued stretching eventually caused the separation of many such tethers, leaving on the surface tube-shaped or spherical microparticles with a diameter as low as 50 to 100 nm. Adhesion receptors (GPIbα, αIIbβ3) and phosphatidylserine were expressed on the surface of these microparticles, which were procoagulant. Shearing platelet-rich plasma at the rate of 10 000 s–1 in a cone-and-plate viscosimeter increased microparticle counts up to 55-fold above baseline. Blocking the GPIb-VWF interaction abolished microparticle generation in both experimental conditions. Thus, a biomechanical process mediated by GPIbα-VWF bonds in rapidly flowing blood may not only initiate platelet arrest onto reactive vascular surfaces but also generate procoagulant microparticles that further enhance thrombus formation

Hematocrit and flow rate regulate the adhesion of platelets to von Willebrand factor

Primary hemostasis and blood clotting is known to be influenced by the red blood cell volume fraction (hematocrit) in blood. Depressed or elevated levels of red blood cells can lead to vascular perfusion problems ranging from bleeding to thrombus formation. The early stage of hemostasis and thus blood clotting in all vessel sections from the arterial to the venous system involves the adhesion of platelets to von Willebrand factor. Here we present experimental and theoretical results showing that the adhesion probability of platelets to von Willebrand factor is strongly and nonlinearly dependent on hematocrit and flow rate. Interestingly, the actual binding forces are not markedly different, which suggest that the origin of such behavior is in the distribution of platelets. Using hydrodynamic simulations of a simple model, we explicitly show that the higher the hematocrit and the flow rate, the larger the amount of platelets residing close to the wall. Our simulation results, which are in excellent agreement with the experimental observations, explain why such phenomena occur. We believe that the nonhomogeneous red blood cell distribution as well as the shear dependent hydrodynamic interaction is key for the accumulation of platelets on the vessel wall. The work we present here is an important step forward from our earlier work on single molecules and extends into the collective cellular behavior of whole blood. It sheds new light on the correlation between hematocrit and the initial steps in hemostasis and thrombosis, and outlines advances for the treatment of vascular diseases associated with high levels of red blood cells. These results are not only highly relevant for the field of hemostasis and the physics of blood clotting but are also of powerful impact in applied science most obviously in drug delivery and colloidal science.National Science Foundation (U.S.) (CAREER Award 1054671