Alkaline thermostable and halophilic endoglucanase from Bacillus licheniformis C108

An endoglucanase was purified from halophilic alkaline Bacillus  licheniformis isolated from soils of Lake Van in Turkey. The optimal pH and temperature of the endoglucanase produced by B.licheniformis C108 were 10.0 and 30°C, respectively. The enzyme was highly stable up to 100°C at pH 10.0 and the enzyme retained its complete activity for 6 h in 7 to10% of NaCl. The activity of the enzyme was significantly inhibited by sodium dodecyl sulfate (SDS), Triton X-100, zinc chloride (ZnCl2),phenylmethanesulfonylfluoride (PMSF) and Urea. The partially purified enzyme revealed that, products of carboxymethylcellulosic hydrolysis were glucose, cellobiose and other longer cellooligosaccharides. Thermostability, alkalinity, halostability and high hydrolytic capability make this enzyme a potential candidate for environmental bioremedetion and bioethanol production processes from cellulosic biomasses as well as waste treatment processes.Key words: Cellulose, Bacillus licheniformis, CMCase, endoglucanase, halostable

Perturbed Orthogonal Matching Pursuit

Cataloged from PDF version of article.Compressive Sensing theory details how a sparsely represented signal in a known basis can be reconstructed with an underdetermined linear measurement model. However, in reality there is a mismatch between the assumed and the actual bases due to factors such as discretization of the parameter space defining basis components, sampling jitter in A/D conversion, and model errors. Due to this mismatch, a signal may not be sparse in the assumed basis, which causes significant performance degradation in sparse reconstruction algorithms. To eliminate the mismatch problem, this paper presents a novel perturbed orthogonal matching pursuit (POMP) algorithm that performs controlled perturbation of selected support vectors to decrease the orthogonal residual at each iteration. Based on detailed mathematical analysis, conditions for successful reconstruction are derived. Simulations show that robust results with much smaller reconstruction errors in the case of perturbed bases can be obtained as compared to standard sparse reconstruction techniques

Sparse ground-penetrating radar imaging method for off-the-grid target problem

Cataloged from PDF version of article.Spatial sparsity of the target space in subsurface or through-the-wall imaging applications has been successfully used within the compressive-sensing framework to decrease the data acquisition load in practical systems, while also generating high-resolution images. The developed techniques in this area mainly discretize the continuous target space into grid points and generate a dictionary of model data that is used in image-reconstructing optimization problems. However, for targets that do not coincide with the computation grid, imaging performance degrades considerably. This phenomenon is known as the off-grid problem. This paper presents a novel sparse ground-penetrating radar imaging method that is robust for off-grid targets. The proposed technique is an iterative orthogonal matching pursuit-based method that uses gradient-based steepest ascent-type iterations to locate the off-grid target. Simulations show that robust results with much smaller reconstruction errors are obtained for multiple off-grid targets compared to standard sparse reconstruction techniques. (c) 2013 SPIE and IS&

AM/FM signal estimation with micro-segmentation and polynomial fit

Cataloged from PDF version of article.Amplitude and phase estimation of AM/FM signals with parametric polynomial representation require the polynomial orders for phase and amplitude to be known. But in reality, they are not known and have to be estimated. A well-known method for estimation is the higher-order ambiguity function (HAF) or its variants. But the HAF method has several reported drawbacks such as error propagation and slowly varying or even constant amplitude assumption. Especially for the long duration time-varying signals like AM/FM signals, which require high orders for the phase and amplitude, computational load is very heavy due to nonlinear optimization involving many variables. This paper utilizes a micro-segmentation approach where the length of segment is selected such that the amplitude and instantaneous frequency (IF) is constant over the segment. With this selection first, the amplitude and phase estimates for each micro-segment are obtained optimally in the LS sense, and then, these estimates are concatenated to obtain the overall amplitude and phase estimates. The initial estimates are not optimal but sufficiently close to the optimal solution for subsequent processing. Therefore, by using the initial estimates, the overall polynomial orders for the amplitude and phase are estimated. Using estimated orders, the initial amplitude and phase functions are fitted to the polynomials to obtain the final signal. The method does not use any multivariable nonlinear optimization and is efficient in the sense that the MSE performance is close enough to the Cramer–Rao bound. Simulation examples are presented

SAR image reconstruction by expectation maximization based matching pursuit

Cataloged from PDF version of article.Synthetic Aperture Radar (SAR) provides high resolution images of terrain and target reflectivity. SAR systems are indispensable in many remote sensing applications. Phase errors due to uncompensated platform motion degrade resolution in reconstructed images. A multitude of autofocusing techniques has been proposed to estimate and correct phase errors in SAR images. Some autofocus techniques work as a post-processor on reconstructed images and some are integrated into the image reconstruction algorithms. Compressed Sensing (CS), as a relatively new theory, can be applied to sparse SAR image reconstruction especially in detection of strong targets. Autofocus can also be integrated into CS based SAR image reconstruction techniques. However, due to their high computational complexity, CS based techniques are not commonly used in practice. To improve efficiency of image reconstruction we propose a novel CS based SAR imaging technique which utilizes recently proposed Expectation Maximization based Matching Pursuit (EMMP) algorithm. EMMP algorithm is greedy and computationally less complex enabling fast SAR image reconstructions. The proposed EMMP based SAR image reconstruction technique also performs autofocus and image reconstruction simultaneously. Based on a variety of metrics, performance of the proposed EMMP based SAR image reconstruction technique is investigated. The obtained results show that the proposed technique provides high resolution images of sparse target scenes while performing highly accurate motion compensation. (C) 2014 Elsevier Inc. All rights reserved

A robust compressive sensing based technique for reconstruction of sparse radar scenes

Cataloged from PDF version of article.Pulse-Doppler radar has been successfully applied to surveillance and tracking of both moving and stationary targets. For efficient processing of radar returns, delay–Doppler plane is discretized and FFT techniques are employed to compute matched filter output on this discrete grid. However, for targets whose delay–Doppler values do not coincide with the computation grid, the detection performance degrades considerably. Especially for detecting strong and closely spaced targets this causes miss detections and false alarms. This phenomena is known as the off-grid problem. Although compressive sensing based techniques provide sparse and high resolution results at sub-Nyquist sampling rates, straightforward application of these techniques is significantly more sensitive to the off-grid problem. Here a novel parameter perturbation based sparse reconstruction technique is proposed for robust delay– Doppler radar processing even under the off-grid case. Although the perturbation idea is general and can be implemented in association with other greedy techniques, presently it is used within an orthogonal matching pursuit (OMP) framework. In the proposed technique, the selected dictionary parameters are perturbed towards directions to decrease the orthogonal residual norm. The obtained results show that accurate and sparse reconstructions can be obtained for off-grid multi target cases. A new performance metric based on Kullback–Leibler Divergence (KLD) is proposed to better characterize the error between actual and reconstructed parameter spaces. Increased performance with lower reconstruction errors are obtained for all the tested performance criteria for the proposed technique compared to conventional OMP and 1 minimization techniques. © 2013 Elsevier Inc. All rights reserve

Measurements of Surface Diffusivity and Coarsening During Pulsed Laser Deposition

Pulsed Laser Deposition (PLD) of homoepitaxial SrTiO3 was studied with in-situ x-ray specular reflectivity and surface diffuse x-ray scattering. Unlike prior reflectivity-based studies, these measurements access both the time- and the length-scales of the evolution of the surface morphology during growth. In particular, we show that this technique allows direct measurements of the diffusivity for both inter- and intra-layer transport. Our results explicitly limit the possible role of island break-up, demonstrate the key roles played by nucleation and coarsening in PLD, and place an upper bound on the Ehrlich-Schwoebel (ES) barrier for downhill diffusion

Simulation of a digital communication system

In this paper, basic components of a digital communication system are simulated by a computer program. The simulation program is modular and flexible to incorporate any future additions and updates. The simulation program allows the user to choose from various channel models, transmitter and receiver antenna systems, modulation and channel coding techniques. A communication system is defined by various parameters including the source, coding, modulation, antenna systems. In order to facilitate the input of these parameters and follow the flow of the simulation, the Graphical User Interface (GUI) is designed for convenience to the user. The input parameters can both be entered from the GUI or from prepared user files. The major contribution of this simulation system to the existing communication simulators is the addition of flexible antenna systems both at the transmitting and receiving ends. With this simulation program, the antenna arrays can be located anywhere on Earth, on any platform and array elements can be placed on the platform by any desired orientation. The simulation program results are compared with both theoretical computations and commercial simulator results and excellent agreement is observed in both cases

Rate-distortion optimization for stereoscopic video streaming with unequal error protection

We consider an error-resilient stereoscopic streaming system that uses an H.264-based multiview video codec and a rateless Raptor code for recovery from packet losses. One aim of the present work is to suggest a heuristic methodology for modeling the end-to-end rate-distortion (RD) characteristic of such a system. Another aim is to show how to make use of such a model to optimally select the parameters of the video codec and the Raptor code to minimize the overall distortion. Specifically, the proposed system models the RD curve of video encoder and performance of channel codec to jointly derive the optimal encoder bit rates and unequal error protection (UEP) rates specific to the layered stereoscopic video streaming. We define analytical RD curve modeling for each layer that includes the interdependency of these layers. A heuristic analytical model of the performance of Raptor codes is also defined. Furthermore, the distortion on the stereoscopic video quality caused by packet losses is estimated. Finally, analytical models and estimated single-packet loss distortions are used to minimize the end-to-end distortion and to obtain optimal encoder bit rates and UEP rates. The simulation results clearly demonstrate the significant quality gain against the nonoptimized schemes