6,094 research outputs found
Parametric thermal analysis for the optimization of Double Walled Tubes layout in the Water Cooled Lithium Lead inboard blanket of DEMO fusion reactor
Within the roadmap that will lead to the nuclear fusion exploitation for electric energy generation, the construction of a DEMOnstration (DEMO) reactor is, probably, the most important milestone to be reached since it will demonstrate the technological feasibility and economic competitiveness of an industrial-scale nuclear fusion reactor. In order to reach this goal, several European universities and research centres have joined their efforts in the EUROfusion action, funded by HORIZON 2020 UE programme. Within the framework of EUROfusion research activities, ENEA and University of Palermo are involved in the design of the Water-Cooled Lithium Lead Breeding Blanket (WCLL BB), that is one of the two BB concepts under consideration to be adopted in the DEMO reactor. It is mainly characterized by a liquid lithium-lead eutectic alloy acting as breeder (lithium) and neutron multiplier (lead), as well as by subcooled pressurized water as coolant. Two separate circuits, both characterized by a pressure of 15.5 MPa and inlet/outlet temperatures of 295 °C/328 °C, are deputed to cool down the First Wall (FW) and the Breeder Zone (BZ). The former consists in a system of radial-toroidal-radial C-shaped squared channels where countercurrent water flow occurs while the latter relies in the use of bundles of poloidal-radial Double Walled Tubes (DWTs) housed within the breeder. A parametric thermal study has been carried out in order to assess the best DWTs' layout assuring that the structural material maximum temperature does not overcome the allowable limit of 550 °C and that the overall coolant thermal rise fulfils the design target value of 33 °C. The study has been performed following a theoretical-numerical approach based on the Finite Element Method (FEM) and adopting the quoted Abaqus FEM code. Main assumptions and models together with results obtained are herewith reported and critically discussed
Peak Ventilation Reference Standards from Exercise Testing: From the FRIEND Registry
Peak Ventilation Reference Standards from Exercise Testing: From the FRIEND Registry. Med. Sci. Sports Exerc., Vol. 50, No. 12, pp. 2603–2608, 2018. Purpose: Cardiopulmonary exercise testing (CPX) provides valuable clinical information, including peak ventilation (V˙ Epeak), which has been shown to have diagnostic and prognostic value in the assessment of patients with underlying pulmonary disease. This report provides reference standards for V˙ Epeak derived from CPX on treadmills in apparently healthy individuals. Methods: Nine laboratories in the United States experienced in CPX administration with established quality control procedures contributed to the Fitness Registry and the Importance of Exercise National Database from 2014 to 2017. Data from 5232 maximal exercise tests from men and women without cardiovascular or pulmonary disease were used to create percentiles ofV˙ Epeak for both men and women by decade between 20 and 79 yr. Additionally, prediction equations were developed for V˙ Epeak using descriptive information. Results: V˙ Epeak was found to be significantly different between men and women and across age groups (P G 0.05). The rate of decline in V˙ Epeak was 8.0% per decade for both men and women. A stepwise regression model of 70% of the sample revealed that sex, age, and height were significant predictors ofV˙ Epeak. The equation was cross-validated with data from the remaining 30% of the sample with a final equation developed from the full sample (r = 0.73). Additionally, a linear regression model revealed forced expiratory volume in 1 s significantly predicted V˙ Epeak (r = 0.73). Conclusions: Reference standards were developed for V˙ Epeak for the United States population. Cardiopulmonary exercise testing laboratories will be able to provide interpretation of V˙ Epeak from these age and sex-specific percentile reference values or alternatively can use these nonexercise prediction equations incorporating sex, age, and height or with a single predictor of forced expiratory volume in 1 s
Efficacy of Retreatment with Oxaliplatin-Based Regimens in Metastatic Colorectal Cancer Patients: The RETROX-CRC Retrospective Study
Antiferromagnetic phase of the gapless semiconductor V3Al
Discovering new antiferromagnetic compounds is at the forefront of developing
future spintronic devices without fringing magnetic fields. The
antiferromagnetic gapless semiconducting D03 phase of V3Al was successfully
synthesized via arc-melting and annealing. The antiferromagnetic properties
were established through synchrotron measurements of the atom-specific magnetic
moments, where the magnetic dichroism reveals large and oppositely-oriented
moments on individual V atoms. Density functional theory calculations confirmed
the stability of a type G antiferromagnetism involving only two-third of the V
atoms, while the remaining V atoms are nonmagnetic. Magnetization, x-ray
diffraction and transport measurements also support the antiferromagnetism.
This archetypal gapless semiconductor may be considered as a cornerstone for
future spintronic devices containing antiferromagnetic elements.Comment: Accepted to Physics Review B on 02/23/1
Nonlinear vibration absorbers for ropeway roller batteries control
This work investigates a nonlinear passive control strategy designed to reduce the peak accelerations in ropeway roller batteries systems by deploying an array of nonlinearly visco-elastic vibration absorbers. The control effectiveness is compared with that of an equivalent array made of linearly visco-elastic absorbers. A nonlinear parametric model describing the interactions between the different parts of this mechanical multibody system previously developed by the present authors is here extended to include the passive vibration control system aimed to mitigate the acceleration peaks induced by the vehicles transit at different operational speeds. To this aim, a set of linearly visco-elastic vibration absorbers is first optimized through the Differential Evolution (DE) algorithm seeking to minimize the area below the frequency-response curves of the linear equations of motion. Then, a new group of nonlinearly visco-elastic absorbers, that can be largely tuned (i.e., they can exhibit either softening or hardening behaviors), is proposed to mitigate the accelerations induced in the roller by the vehicle transit. These nonlinearly visco-elastic absorbers are optimized by means of the DE algorithm and comparisons with the control achieved by the linear absorbers are carried out to show the higher performance of the proposed nonlinear device. A possible design of the nonlinearly visco-elastic absorber, based on the hysteresis of a wire rope assembly undergoing flexural cycles, is also proposed and discussed
Comportamiento a la flexión y absorción de humedad en placas de aglomerado y polipropileno reciclado
La fabricación de placas aglomeradas tiene dos inconvenientes importantes: el consumo de madera virgen y la emisión de VOC’s (compuestos orgánicos volátiles), localizados en el adhesivo utilizado, que tienen consecuencias ambientales ampliamente documentadas. Para mitigar estos efectos, se han realizado experiencias de conformación de placas sustituyendo en parte la madera virgen por material reciclado, el cual elimina además la necesidad de utilizar adhesivos. Este trabajo muestra los resultados obtenidos en los ensayos de flexión y de absorción de humedad de placas hechas a escala piloto, con distintas proporciones de madera y polipropileno reciclado, y su comparación con los valores de placas comerciales de un espesor semejante. Estos resultados resultan alentadores, ya que si bien presentan amplia variabilidad dada su conformación a escala no industrial, con las placas conformadas con material reciclado se están alcanzando valores de resistencia a la flexión cercanos a los comerciales en los ensayos realizados, y en la absorción de humedad los resultados son mejores que en las comerciales.Fil: Rivarola, A.. Universidad Tecnológica Nacional. Facultad Regional de Mendoza; ArgentinaFil: Rojo, L.. Universidad Tecnológica Nacional. Facultad Regional de Mendoza; ArgentinaFil: Arena, Alejandro Pablo. Universidad Tecnológica Nacional. Facultad Regional de Mendoza; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mendoza; Argentin
Conceptual design of the enhanced coolant purification systems for the European HCLL and HCPB test blanket modules
The Coolant Purification Systems (CPSs) is one of the most relevant ancillary systems of European Helium Cooled Lead Lithium (HCLL) and Helium Cooled Pebble Bed (HCPB) Test Blanket Modules (TBMs) which are currently in the preliminary design phase in view of their installation and operation in ITER. The CPS implements mainly two functions: the extraction and concentration of the tritium permeated from the TBM modules into the primary cooling circuit and the chemistry control of helium primary coolant. During the HCLL and HCPB-TBSs (Test Blanket Systems) Conceptual Design Review (CDR) in 2015 it was recognized the need of reducing the tritium permeation into the Port Cell #16 of ITER. To achieve this and, then, to lower the tritium partial pressure in the Helium Cooling Systems in normal operation, the helium flow-rate treated by each CPS has been increased of almost one order of magnitude. In 2017, to satisfy the CDR outcomes and the new design requirements requested by Fusion for Energy (F4E, the European Domestic Agency for ITER), ENEA performed a preliminary design of the “enhanced” CPSs. This paper presents the current design of the “enhanced” CPSs, focusing on design requirements, assumptions, selection of technologies and preliminary components sizing
- …