13 research outputs found

    A geometrically defined stiffness contact for finite element models of wood joints

    Get PDF
    Finite element models tend to overestimate the actual elastic response of structural timber connections. The paper shows how such overprediction relates to the modelling of the contact between fasteners and timber. The use of a control parameter called stiffness contact is proposed. After an experimental campaign, a method to determine it, based only on the geometry of a rectangular contact area, is proposed. The modeling adequacy is demonstrated by applying it to dowel embedment and moment resistant wood joint tests. The obtained results show good agreement with the experimental test series

    Report of the 4th Workshop on Age Reading of horse mackerel, Mediterranean horse mackerel and blue jack mackerel (Trachurus trachurus, T. mediterraneus and T. picturatus) (WKARHOM)

    Get PDF
    Based on the previous work from WKARHOM3 (ICES, 2018), the Working Group on Biological Parameters (ICES, 2020) identified the need for a new otolith exchange followed by an age read-ing Workshop. The Workshop on Age reading of Horse Mackerel, Mediterranean Horse Macke-rel and Blue Jack Mackerel (Trachurus trachurus, T. mediterraneus and T. picturatus) (WKAR-HOM4) had several main objectives; to review the current protocols of ageing Trachurus species, to update the advances in the validation of the ageing criteria (i.e. the annual deposition of one annulus, coherency of the interpretation), to evaluate the new precision of ageing data of Tra-churus species and to update guidelines, common ageing criteria and reference collections of otoliths. An online otolith exchange was performed using SmartDots during 2021 and 2022, and results including the three Trachurus species were published in advance of the meeting, showing a low Percentage of Agreement (PA) both when considering all the readers (44-55%) and the advanced readers only (52-54%) (Massaro and Jurado-Ruzafa, 2022). For T. trachurus the Coef-ficient of Variation (CV) was lower for the sliced samples (22-18%) than for whole otoliths sam-ples (44-38%). Readers participating in the exchange, following discussion during the WKAR-HOM4 meeting, agreed that the main cause of age determination error for T. trachurus was due to the different otolith preparation techniques (whole/sliced). These differences reflect the stunted growth and compactness of the annuli in older specimens (from the 4th-5th annuli on-wards). Anyway, for the three Trachurus species, there are several difficulties in age determina-tion: identification of the first growth annulus, presence of many false rings (mainly in the first and second annuli) and the interpretation and identification of the edge characteristics (opaque/translucent). The second reading exercise was performed during the workshop orga-nized in four different events (i.e. Trachurus trachurus whole otoliths -135 images-, T. trachurus sliced otoliths -95 images- T. mediterraneus whole otoliths -150 images- and T. picturatus whole otoliths –121 images). For T. trachurus no enhancement among readers’ precision was observed in all cases, in terms of PA and CV. Conversely, for T. mediterraneus and T. picturatus a notice-able improvement in terms of PA and decrease of CV occurred compared to the pre-workshop exchange. Finally, this group updated the ageing guidelines and a reference collection of images for all the species, with the aim to employ these tools for all laboratories.ICESN

    Comparación de las técnicas no destructivas de tomografía ultrasónica y resistencia a la perforación en la evaluación de discos de madera

    Full text link
    El planteamiento de este trabajo surge de la necesidad de obtener una información fiable del estado de los árboles, en particular de aquellos que se encuentran en las ciudades. El arbolado urbano proporciona múltiples e importantes funciones, aportando beneficios ambientales, sociales y económicos. Puesto que su deterioro puede derivar en fatales accidentes para el ciudadano, este estudio llevado a cabo en discos de madera seleccionados de árboles que formaron parte del arbolado urbano de Campinas (São Paulo) puede colaborar con la propuesta de llevar a cabo acciones preventivas y eficaces para evitar estos posibles e importantes daños. Para ello se ha analizado la relación de dos de los ensayos no destructivos más empleados para determinar si un árbol presenta o no riesgo de caída, la propagación de ondas (tomografía ultrasónica) y la resistencia a la perforación, ambas actuando como complemento al análisis visual del árbol. Los resultados obtenidos ponen de manifiesto que la asociación de las dos técnicas ayuda a mejorar la precisión del diagnóstico del estado del árbol

    Modelling of moment transmitting beam-to-column timber connections accounting for frictional transmission

    No full text
    The development of accurate structural modelling techniques is required to promote the use of timber as a renewable alternative to other structural materials. Due to their remarkable influence on the global behaviour of a timber structure, an accurate description of the performance of structural connections is needed. Particularly in the case of moment transmitting beam-to-column connections with dowel-type fasteners, such properties are difficult to obtain experimentally. This paper develops a finite element (FE) model that simulates the behaviour of these connections under quasi-static loading, with a focus on the estimation of rotational stiffness and load distribution among the dowels. The model is validated against short-term laboratory tests. Resulting friction between timber members due to the installation procedure must be considered, as it greatly influences the rotational response. Besides, non-linear behaviour of timber and a softened contact parameter have been implemented, and their influence on the FE model validation process is demonstrated

    Modelling of moment transmitting beam-to-column timber connections accounting for frictional transmission

    No full text
    The development of accurate structural modelling techniques is required to promote the use of timber as a renewable alternative to other structural materials. Due to their remarkable influence on the global behaviour of a timber structure, an accurate description of the performance of structural connections is needed. Particularly in the case of moment transmitting beam-to-column connections with dowel-type fasteners, such properties are difficult to obtain experimentally. This paper develops a finite element (FE) model that simulates the behaviour of these connections under quasi-static loading, with a focus on the estimation of rotational stiffness and load distribution among the dowels. The model is validated against short-term laboratory tests. Resulting friction between timber members due to the installation procedure must be considered, as it greatly influences the rotational response. Besides, non-linear behaviour of timber and a softened contact parameter have been implemented, and their influence on the FE model validation process is demonstrated

    A geometrically defined stiffness contact for finite element models of wood joints

    No full text
    Finite element models tend to overestimate the actual elastic response of structural timber connections. The paper shows how such overprediction relates to the modelling of the contact between fasteners and timber. The use of a control parameter called stiffness contact is proposed. After an experimental campaign, a method to determine it, based only on the geometry of a rectangular contact area, is proposed. The modeling adequacy is demonstrated by applying it to dowel embedment and moment resistant wood joint tests. The obtained results show good agreement with the experimental test series

    Klotho inversely relates with carotid intima- media thickness in atherosclerotic patients with normal renal function (eGFR ≥60 mL/min/1.73m2): a proof-of-concept study

    Get PDF
    IntroductionKlotho protein is predominantly expressed in the kidneys and has also been detected in vascular tissue and peripheral blood circulating cells to a lesser extent. Carotid artery intima-media thickness (CIMT) burden, a marker of subclinical atherosclerosis, has been associated with reductions in circulating Klotho levels in chronic kidney disease patients, who show reduced levels of this protein at all stages of the disease. However, the contribution of serum Klotho and its expression levels in peripheral blood circulating cells and in the carotid artery wall on the CIMT in the absence of kidney impairment has not yet been evaluated.MethodsWe conducted a single-center study in 35 atherosclerotic patients with preserved kidney function (eGFR≥60 mL/min/1.73m2) subjected to elective carotid surgery. Serum levels of Klotho and cytokines TNFa, IL6 and IL10 were determined by ELISA and transcripts encoding for Klotho (KL), TNF, IL6 and IL10 from vascular segments were measured by qRT-PCR. Klotho protein expression in the intima-media and adventitia areas was analyzed using immunohistochemistry.ResultsAPatients with higher values of CIMT showed reduced Klotho levels in serum (430.8 [357.7-592.9] vs. 667.8 [632.5-712.9] pg/mL; p<0.001), mRNA expression in blood circulating cells and carotid artery wall (2.92 [2.06-4.8] vs. 3.69 [2.42-7.13] log.a.u., p=0.015; 0.41 [0.16-0.59] vs. 0.79 [0.37-1.4] log.a.u., p=0.013, respectively) and immunoreactivity in the intimal-medial area of the carotids (4.23 [4.15-4.27] vs. 4.49 [4.28-4.63] log µm2 p=0.008). CIMT was inversely related with Klotho levels in serum (r= -0.717, p<0.001), blood mRNA expression (r=-0.426, p=0.011), and with carotid artery mRNA and immunoreactivity levels (r= -0.45, p=0.07; r= -0.455, p= 0.006, respectively). Multivariate analysis showed that serum Klotho, together with the gene expression levels of tumor necrosis factor TNFa in blood circulating cells, were independent determinants of CIMT values (adjusted R2 = 0.593, p<0.001).DiscussionThe results of this study in subjects with eGFR≥60mL/min/1.73m2 show that patients with carotid artery atherosclerosis and higher values of CIMT present reduced soluble Klotho levels, as well as decreased KL mRNA expression in peripheral blood circulating cells and Klotho protein levels in the intima-media of the carotid artery wall
    corecore