Microjoule mode-locked oscillators: issues of stability and noise

In this work, for the first time to our knowledge, stability and noise of a thin-disk mode-locked Yb:YAG oscillator operating in both negative- (NDR) and positive-dispersion (PDR) regimes have been analyzed systematically within a broad range of oscillator parameters. It is found, that the scaling of output pulse energy from 7 $\mu$J up to 55 $\mu$J in the NDR requires a dispersion scaling from -0.013 ps$^{2}$ up to -0.31 ps$^{2}$ to provide the pulse stability. Simultaneously, the energy scaling from 6 $\mu$J up to 90 $\mu$J in the PDR requires a moderate dispersion scaling from 0.0023 ps$^{2}$ up to 0.011 ps$^{2}$. A chirped picosecond pulse in the PDR has a broader spectrum than that of a chirp-free soliton in the NDR. As a result, a chirped picosecond pulse can be compressed down to a few of hundreds of femtoseconds. A unique property of the PDR has been found to be an extremely reduced timing jitter. The numerical results agree with the analytical theory, when spectral properties of the PDR and the negative feedback induced by spectral filtering are taken into account.Comment: 12 pages, 11 figures, SPIE's International Symposium "Photonics Europe" (EPE10), 12-16 April 2010, Brussels, Belgiu

Pearl-chain waveguides machined with a femtosecond high-energy oscillator

A new regime of waveguides consisting of aligned spheres of strongly changed refractive - index in fused silica are explored and their guiding properties are measured

Chirped-pulse oscillators: a unified standpoint

A completely analytical and unified approach to the theory of chirped-pulse oscillators is presented. The approach developed is based on the approximate integration of the generalized nonlinear complex Ginzburg-Landau equation and demonstrates that a chirped-pulse oscillator is controlled by only two parameters. It makes it easy to trace spread of the real-world characteristics of both solid-state and fiber oscillators operating in the positive dispersion regime.Comment: 12 pages, 11 figures, 5 tables; the mathematical apparatus is described in detail in http://info.tuwien.ac.at/kalashnikov/genNCGLE.htm

Generation of highly-chirped dissipative solitons in Er-doped all-fiber oscillator

The all-fiber highly-chirped dissipative soliton (HCDS) oscillator was realised at 1.5 Μm wavelength. A normal net cavity dispersion was achieved by using a conventional dispersion compensating fiber (DCF). To separate effects of the amplitude self-modulation and dissipative soliton formation, we exploit in the laser cavity both standard single mode fiber and polarization maintaining single mode fiber. The properties of the generated pulses have been varied by changing spectral filter bandwidth and DCF lengths. After compression of the nJ-level ~6 ps HCDS in the external fiber compressor, we measured the output pulse duration of 165 fs (an estimated chirp parameter 40)

Multicolour nonlinearly bound chirped dissipative solitons

The dissipative soliton regime is one of the most advanced ways to generate high-energy femtosecond pulses in mode-locked lasers. On the other hand, the stimulated Raman scattering in a fibre laser may convert the excess energy out of the coherent dissipative soliton to a noisy Raman pulse, thus limiting its energy. Here we demonstrate that intracavity feedback provided by re-injection of a Raman pulse into the laser cavity leads to formation of a coherent Raman dissipative soliton. Together, a dissipative soliton and a Raman dissipative soliton (of the first and second orders) form a two (three)-colour stable complex with higher total energy and broader spectrum than those of the dissipative soliton alone. Numerous applications can benefit from this approach, including frequency comb spectroscopy, transmission lines, seeding femtosecond parametric amplifiers, enhancement cavities and multiphoton fluorescence microscopy

Pump-seed synchronization for MHz repetition rate, high-power optical parametric chirped pulse amplification

We report on an active synchronization between two independent mode-locked lasers using a combined electronic-optical feedback. With this scheme, seed pulses at MHz repetition rate were amplified in a non-collinear optical parametric chirped pulse amplifier (OPCPA). The amplifier was seeded with stretched 1.5 nJ pulses from a femtosecond Ti:Sapphire oscillator, while pumped with the 1 ps, 2.9 µJ frequency-doubled output of an Yb:YAG thin-disk oscillator. The residual timing jitter between the two oscillators was suppressed to 120 fs (RMS), allowing for an efficient and broadband amplification at 11.5 MHz to a pulse energy of 700 nJ and an average power of 8 W. First compression experiment with 240 nJ amplified pulse energy resulted in a pulse duration of ~10 fs

High-power multi-megahertz source of waveform-stabilized few-cycle light

Waveform-stabilized laser pulses have revolutionized the exploration of the electronic structure and dynamics of matter by serving as the technological basis for frequency-comb and attosecond spectroscopy. Their primary sources, mode-locked titanium-doped sapphire lasers and erbium/ytterbium-doped fibre lasers, deliver pulses with several nanojoules energy, which is insufficient for many important applications. Here we present the waveform-stabilized light source that is scalable to microjoule energy levels at the full (megahertz) repetition rate of the laser oscillator. A diode-pumped Kerr-lens-mode-locked Yb:YAG thin-disk laser combined with extracavity pulse compression yields waveform-stabilized few-cycle pulses (7.7 fs, 2.2 cycles) with a pulse energy of 0.15 mJ and an average power of 6W. The demonstrated concept is scalable to pulse energies of several microjoules and near-gigawatt peak powers. The generation of attosecond pulses at the full repetition rate of the oscillator comes into reach. The presented system could serve as a primary source for frequency combs in the mid infrared and vacuum UV with unprecedented high power levels

All-fiber highly chirped dissipative soliton generation in the telecom range

A high-energy (0.93 nJ) all-fiber erbium femtosecond oscillator operating in the telecom spectral range is proposed and realized. The laser cavity, built of commercially available fibers and components, combines polarization maintaining (PM) and non-PM parts providing stable generation of highly chirped (chirp parameter 40) pulses compressed in an output piece of standard PM fiber to 165 fs. The results of the numerical simulation agree well with the experiment. The analyzed intracavity pulse dynamics enables the classification of the generated pulses as dissipative solitons

Attosecond control of electrons emitted from a nanoscale metal tip

Attosecond science is based on steering of electrons with the electric field of well-controlled femtosecond laser pulses. It has led to, for example, the generation of XUV light pulses with a duration in the sub-100-attosecond regime, to the measurement of intra-molecular dynamics by diffraction of an electron taken from the molecule under scrutiny, and to novel ultrafast electron holography. All these effects have been observed with atoms or molecules in the gas phase. Although predicted to occur, a strong light-phase sensitivity of electrons liberated by few-cycle laser pulses from solids has hitherto been elusive. Here we show a carrier-envelope (C-E) phase-dependent current modulation of up to 100% recorded in spectra of electrons laser-emitted from a nanometric tungsten tip. Controlled by the C-E phase, electrons originate from either one or two sub-500as long instances within the 6-fs laser pulse, leading to the presence or absence of spectral interference. We also show that coherent elastic re-scattering of liberated electrons takes place at the metal surface. Due to field enhancement at the tip, a simple laser oscillator suffices to reach the required peak electric field strengths, allowing attosecond science experiments to be performed at the 100-Megahertz repetition rate level and rendering complex amplified laser systems dispensable. Practically, this work represents a simple, exquisitely sensitive C-E phase sensor device, which can be shrunk in volume down to ~ 1cm3. The results indicate that the above-mentioned novel attosecond science techniques developed with and for atoms and molecules can also be employed with solids. In particular, we foresee sub-femtosecond (sub-) nanometre probing of (collective) electron dynamics, such as plasmon polaritons, in solid-state systems ranging in size from mesoscopic solids via clusters to single protruding atoms.Comment: Final manuscript version submitted to Natur

Determination of the Carrier-Envelope Phase of Few-Cycle Laser Pulses with Terahertz-Emission Spectroscopy

The availability of few-cycle optical pulses opens a window to physical phenomena occurring on the attosecond time scale. In order to take full advantage of such pulses, it is crucial to measure and stabilise their carrier-envelope (CE) phase, i.e., the phase difference between the carrier wave and the envelope function. We introduce a novel approach to determine the CE phase by down-conversion of the laser light to the terahertz (THz) frequency range via plasma generation in ambient air, an isotropic medium where optical rectification (down-conversion) in the forward direction is only possible if the inversion symmetry is broken by electrical or optical means. We show that few-cycle pulses directly produce a spatial charge asymmetry in the plasma. The asymmetry, associated with THz emission, depends on the CE phase, which allows for a determination of the phase by measurement of the amplitude and polarity of the THz pulse