Optimizing application of entomopathogenic nematodes to manage large pine weevil, Hylobius abietis L. (Coleoptera:Curculionidae) populations developing in pine stumps, Pinus sylvestris

Hylobius abietis develops in stumps of recently felled coniferous trees, and adults emerge to feed on and kill young seedlings. Entomopathogenic nematodes applied to stumps containing late instar larvae and pupae can reduce the number of adults emerging. We tested the feasibility of reduced application rate and volume during a broader window of application in field trials in 2004 and 2005. Application at the standard rate of 3.5 million infective juveniles per stump suppressed the number of adults emerging by up to 79–85% relative to controls for Heterorhabditis downesi, 57–64% for Steinernema carpocapsae and 51–56% for S. feltiae. When the application rate was halved, only H. downesi gave a significant reduction in emergence (75–79%). Nematodes applied in April, May or June significantly reduced weevil populations, and application of nematode-killed insects in May was as effective as an aqueous suspension. A fourfold reduction in application volume from 500 to 125 ml per stump did not affect the percentage of weevils parasitized, and stump excavation revealed that even at the reduced volume, both S. carpocapsae (ambusher) and H. downesi (cruiser) parasitized weevils 40–49 cm from the bole and 40–49 cm below soil level. A higher percentage of larvae (60%) were infected than either pupae (36%) or callow adults (18%). Our trials show promise for expanding the use of entomopathogenic nematodes against pine weevil, as the standard application rate can be halved, and the volume reduced to 25% of the standard without significant loss of efficacy, and there is a wide window of opportunity for application, even when soil temperatures are as low as 9 °C

Optimizing application of entomopathogenic nematodes to manage large pine weevil, Hylobius abietis L. (Coleoptera:Curculionidae) populations developing in pine stumps, Pinus sylvestris

Hylobius abietis develops in stumps of recently felled coniferous trees, and adults emerge to feed on and kill young seedlings. Entomopathogenic nematodes applied to stumps containing late instar larvae and pupae can reduce the number of adults emerging. We tested the feasibility of reduced application rate and volume during a broader window of application in field trials in 2004 and 2005. Application at the standard rate of 3.5 million infective juveniles per stump suppressed the number of adults emerging by up to 79–85% relative to controls for Heterorhabditis downesi, 57–64% for Steinernema carpocapsae and 51–56% for S. feltiae. When the application rate was halved, only H. downesi gave a significant reduction in emergence (75–79%). Nematodes applied in April, May or June significantly reduced weevil populations, and application of nematode-killed insects in May was as effective as an aqueous suspension. A fourfold reduction in application volume from 500 to 125 ml per stump did not affect the percentage of weevils parasitized, and stump excavation revealed that even at the reduced volume, both S. carpocapsae (ambusher) and H. downesi (cruiser) parasitized weevils 40–49 cm from the bole and 40–49 cm below soil level. A higher percentage of larvae (60%) were infected than either pupae (36%) or callow adults (18%). Our trials show promise for expanding the use of entomopathogenic nematodes against pine weevil, as the standard application rate can be halved, and the volume reduced to 25% of the standard without significant loss of efficacy, and there is a wide window of opportunity for application, even when soil temperatures are as low as 9 °C

Suppression of the large pine weevil Hylobius abietis (L.) (Coleoptera: Curculionidae) in pine stumps by entomopathogenic nematodes with different foraging strategies

Hylobius abietis is the most important pest of reforestation in Northern Europe. Weevils develop in stumps of felled conifers and emerging adults feed on and kill young trees. In trials conducted in each of 3 years, entomopathogenic nematodes were applied around pine stumps containing late instar weevils. Since these immature weevils are sedentary and occur within stumps at varying depths in soil, it is predicted that nematodes with a cruise foraging strategy, such as Heterorhabditis spp., should be most effective. The three commercially available species used in our trials, H. megidis, Steinernema feltiae, and S. carpocapsae, have cruise, intermediate and ambush strategies, respectively. We also included the indigenous species H. downesi and a strain of S. feltiae isolated from an Irish coniferous forest. Heterorhabditis downesi suppressed emergence of adult weevils in 2 of 3 trials; and commercial S. feltiae and H. megidis NLH85 in 1 trial each. Stump excavation showed that H. downesi parasitized 55â63% of developing weevils; this was matched by H. megidis NLH85 and S. carpocapsae in 2 and 1 years, respectively. A higher proportion of larvae (46%) than of pupae (32%) or callow adults (30%) were parasitized by nematodes. All nematodes, including S. carpocapsae, parasitized weevils 40â49 cm from the bole of the stump and 30â39 cm below soil level. We conclude that heterorhabditids, particularly H. downesi, have greatest potential against pine weevils in stumps, but that a reputation as an ambush forager should not exclude a species such as S. carpocapsae from trials against sedentary subterranean insect pests

Origins of the non-exponential reorientation dynamics of nanoconfined water

This is the published version. Copyright 2014 American Institute of PhysicsThe dynamics of water are dramatically modified upon confinement in nanoscale hydrophilic silica pores. In particular, the OH reorientation dynamics of the interfacial water are non-exponential and dramatically slowed relative to the bulk liquid. A detailed analysis of molecular dynamics simulations is carried out to elucidate the microscopic origins of this behavior. The results are analyzed in the context of the extended jump model for water that describes the reorientation as a combination of hydrogen-bond exchanges, or jumps, and rotation of intact hydrogen bonds, with the former representing the dominant contribution. Within this model, the roles of surface and dynamical heterogeneities are considered by spatially resolving the hydrogen-bond jump dynamics into individual sites on the silica pore surface. For each site the dynamics is nearly mono-exponential, indicating that dynamical heterogeneity is at most a minor influence, while the distribution of these individual site jump times is broad. The non-exponential dynamics can also not be attributed to enthalpic contributions to the barriers to hydrogen-bond exchanges. Two entropic effects related to the surface roughness are found to explain the retarded and diverse dynamics: those associated with the approach of a new hydrogen-bond acceptor and with the breaking of the initial hydrogen-bond

The Surface Characterisation of Fused Filament Fabricated (FFF) 3D Printed PEEK/Hydroxyapatite Composites

Polyetheretherketone (PEEK) is a high-performance thermoplastic polymer which has found increasing application in orthopaedics and has shown a lot of promise for ‘made-to-measure’ implants via additive manufacturing approaches. However, PEEK is bioinert and needs to undergo surface modification to make it at least osteoconductive to ensure a more rapid, improved, and stable fixation that will last longer in vivo. One approach to solving this issue is to modify PEEK with bioactive agents such as hydroxyapatite (HA). The work reported in this study demonstrates the direct 3D printing of PEEK/HA composites of up to 30 weight percent (wt%) HA using a Fused Filament Fabrication (FFF) approach. The surface characteristics and in vitro properties of the composite materials were investigated. X-ray diffraction revealed the samples to be semi-crystalline in nature, with X-ray Photoelectron Spectroscopy and Time-of-Flight Secondary Ion Mass Spectrometry revealing HA materials were available in the uppermost surface of all the 3D printed samples. In vitro testing of the samples at 7 days demonstrated that the PEEK/HA composite surfaces supported the adherence and growth of viable U-2 OS osteoblast like cells. These results demonstrate that FFF can deliver bioactive HA on the surface of PEEK bio-composites in a one-step 3D printing process

3D Fabrication and Characterisation of Electrically Receptive PCL-Graphene Scaffolds for Bioengineered In Vitro Tissue Models

Polycaprolactone (PCL) is a well-established biomaterial, offering extensive mechanical attributes along with low cost, biocompatibility, and biodegradability; however, it lacks hydrophilicity, bioactivity, and electrical conductivity. Advances in 3D fabrication technologies allow for these sought-after attributes to be incorporated into the scaffolds during fabrication. In this study, solvent-free Fused Deposition Modelling was employed to fabricate 3D scaffolds from PCL with increasing amounts of graphene (G), in the concentrations of 0.75, 1.5, 3, and 6% (w/w). The PCL+G scaffolds created were characterised physico-chemically, electrically, and biologically. Raman spectroscopy demonstrated that the scaffold outer surface contained both PCL and G, with the G component relatively uniformly distributed. Water contact angle measurement demonstrated that as the amount of G in the scaffold increases (0.75–6% w/w), hydrophobicity decreases; mean contact angle for pure PCL was recorded as 107.22 ± 9.39°, and that with 6% G (PCL+6G) as 77.56 ± 6.75°. Electrochemical Impedance Spectroscopy demonstrated a marked increase in electroactivity potential with increasing G concentration. Cell viability results indicated that even the smallest addition of G (0.75%) resulted in a significant improvement in electroactivity potential and bioactivity compared with that for pure PCL, with 1.5 and 3% exhibiting the highest statistically significant increases in cell proliferation

Identification of nutrition factors in the metabolic syndrome and its progression over time in older adults: analysis of the TUDA cohort

BACKGROUND: Nutrition is recognized as playing an important role in the metabolic syndrome (MetS), but the dietary components involved are unclear. We aimed to investigate nutrition factors in relation to MetS and its progression in older adults over a follow-up period of 5.4 years.METHODS: Community-dwelling adults (≥ 60y) from the Trinity-Ulster-Department-of-Agriculture study, sampled at baseline (2008-12) and follow-up (2014-18; n 953), were classified as 'with MetS' by having three or more of: waist circumference (≥ 102 cm, males; ≥ 88 cm, females); HDL-cholesterol (&lt; 1.0 mmol/L, males; &lt; 1.3 mmol/L, females); triglycerides (≥ 1.7 mmol/L); blood pressure (systolic ≥ 130 and/or diastolic ≥ 85 mmHg); and hemoglobin A1c (≥ 39 mmol/mol).RESULTS: MetS was identified in 67% of participants, increasing to 74% at follow-up. Predictors at baseline for the development of metabolic syndrome (MetS) at follow-up were higher waist circumference (odds ratio [95%CI]; 1.06 [1.01-1.11]), but not BMI, and increased triglyceride concentrations (2.01 [1.29-3.16]). In dietary analysis (at follow-up), higher protein (g/kg bodyweight/day) and monounsaturated fatty acid (g/day) intakes were each associated with lower risk of MetS (0.06 [0.02-0.20] and 0.88 [0.78-1.00], respectively), whilst higher protein was also associated with lower abdominal obesity (0.10 [0.02-0.51]) and hypertension (0.22 [0.00-0.80]). Furthermore, participants with, compared to without, MetS consumed less high-quality protein foods (P = 0.006) and more low-quality protein foods (P &lt; 0.001), as defined by the protein digestibility-corrected amino acid score.CONCLUSIONS: Dietary interventions targeting protein quantity and quality may have specific benefits in preventing or delaying the progression of MetS in at-risk older people, but this requires investigation in the form of randomized trials.</p