Demonstrating Aqueous-Phase Low-Molecular-Weight-Gel Wicking of Oil for the Remediation of Oil Spilled into Surface Water

Oils spilled into surface water require effective and timely treatment. In this paper, we report on a low-molecular-weight gelator that can form gels in organic and aqueous phases. The aqueous gel was observed to absorb oils, which is proposed as a new class of materials for remediating oil spilled into surface water. The gels and the low molecular-weight gelator have both fundamental and applied significance. Fundamentally, identifying the mechanisms that govern the formation of these gels and their resultant mechanical properties is of interest. Subsequently, these fundamental insights aid in the optimization of these gels for addressing spilled oil. First, we briefly compare the organic and aqueous gels qualitatively before focusing on the aqueous gel. Second, we demonstrate the ability of the aqueous gel to wick oils through experiments in a Hele-Shaw cell and compare our results to the Washburn equation for porous media. The Washburn equation is not entirely adequate in describing our results due to the change in volume of the porous media during the wicking process. Finally, we investigate mechanisms proposed to govern the formation of low-molecular-weight gels in the literature through rheological shear measurements during gel formation. Our experiments suggest that the proposed mechanisms are applicable to our aqueous gels, growing as anisotropic crystal networks with fractal dimensions between one and two dimensions from temporally sporadic nucleation sites

Finishing the euchromatic sequence of the human genome

The sequence of the human genome encodes the genetic instructions for human physiology, as well as rich information about human evolution. In 2001, the International Human Genome Sequencing Consortium reported a draft sequence of the euchromatic portion of the human genome. Since then, the international collaboration has worked to convert this draft into a genome sequence with high accuracy and nearly complete coverage. Here, we report the result of this finishing process. The current genome sequence (Build 35) contains 2.85 billion nucleotides interrupted by only 341 gaps. It covers ∼99% of the euchromatic genome and is accurate to an error rate of ∼1 event per 100,000 bases. Many of the remaining euchromatic gaps are associated with segmental duplications and will require focused work with new methods. The near-complete sequence, the first for a vertebrate, greatly improves the precision of biological analyses of the human genome including studies of gene number, birth and death. Notably, the human enome seems to encode only 20,000-25,000 protein-coding genes. The genome sequence reported here should serve as a firm foundation for biomedical research in the decades ahead

Effect of solid solution and aging treatment on the microstructure, mechanical properties, corrosion behavior and antimicrobial properties of Ti-5Mn alloys

In this paper, Ti-5Mn alloy was subjected to different heat treatments to explore the possibility of preparing antimicrobial Ti-Mn alloys and to examine the effect of precipitate on the properties of the alloy. The microstructure, phase composition, hardness, biocorrosion properties and antimicrobial properties of Ti-5Mn alloys after different heat treatments was analyzed by metallurgical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), x-ray diffraction (XRD), microhardness tests, electrochemical tests and antimicrobial tests. The results have shown that the phase composition of the solid solution treated Ti-5Mn(T4) was mainly β -Ti phase, and the aged Ti-5Mn was composed of α -Ti phase and Ti _17 Mn _3 phase, while Ti _17 Mn _3 precipitate gradually increased with the extension of the aging time. Ti-5Mn(T4) showed the highest hardness and the best corrosion resistance and the aging process reduced the hardness of Ti-5Mn(T4) alloy. With the precipitation of Ti _17 Mn _3 , the corrosion resistance of the alloy became worse and the hardness was reduced, but the corrosion resistance of Ti-5Mn alloy was still better than that of cp-Ti. It was demonstrated that Ti-5Mn(T4) exhibited no antibacterial properties against Staphylococcus aureus , but the aging treatment improved the antibacterial property of Ti-5Mn(T4) alloy, and the antibacterial rate of Ti-5Mn alloy reached 69% after 50 h aging treatment