Structural basis for the homotypic fusion of chlamydial inclusions by the SNARE-like protein IncA.

Many intracellular bacteria, including Chlamydia, establish a parasitic membrane-bound organelle inside the host cell that is essential for the bacteria\u27s survival. Chlamydia trachomatis forms inclusions that are decorated with poorly characterized membrane proteins known as Incs. The prototypical Inc, called IncA, enhances Chlamydia pathogenicity by promoting the homotypic fusion of inclusions and shares structural and functional similarity to eukaryotic SNAREs. Here, we present the atomic structure of the cytoplasmic domain of IncA, which reveals a non-canonical four-helix bundle. Structure-based mutagenesis, molecular dynamics simulation, and functional cellular assays identify an intramolecular clamp that is essential for IncA-mediated homotypic membrane fusion during infection

Identification of gas sparging regimes for granular anaerobic membrane bioreactor to enable energy neutral municipal wastewater treatment

In this study, conventional and novel gas sparging regimes have been evaluated for a municipal wastewater granular anaerobic MBR to identify how best to achieve high sustainable fluxes whilst simultaneously conserving energy demand. Using continuous gas sparging in combination with continuous filtration, flux was strongly dependent upon shear rate, which imposed a considerable energy demand. Intermittent gas sparging was subsequently evaluated to reduce energy demand whilst delivering an analogous shear rate. For a flux of 5 L m-2 h-1, a fouling rate below 1 mbar h-1 was sustained with low gas sparging frequency and gas sparging rates. However, to sustain low fouling rates for fluxes above 10 L m-2 h-1, a gas sparging frequency of 50 % (i.e. 10 s on/10 s off) and an increase in gas sparging rate is needed, indicating the importance of shear rate and gas sparging frequency. An alternative gas sparging regime was subsequently tested in which filtration was conducted without gas sparging, followed by membrane relaxation for a short period coupled with gas sparging, to create a pseudo dead-end filtration cycle. Fouling characterisation evidenced considerable cake fouling rates of 200-250 mbar h-1 within each filtration cycle. However, long term fouling transient analysis demonstrated low residual fouling resistance, suggesting the cake formed during filtration was almost completely reversible, despite operating at a flux of 15 L m-2 h-1, which was equivalent or higher than the critical flux of the suspension. It is therefore asserted that by operating filtration in the absence of shear, fouling is less dependent upon the preferential migration of the sub-micron particle fraction and is instead governed by the compressibility of the heterogeneous cake formed, which enables higher operational fluxes to be achieved. Comparison of energy demand for the three gas sparging regimes to the energy recovered from municipal wastewater AnMBR demonstrated that only by using dead-end filtration can energy neutral wastewater treatment be realised which is the ultimate ambition for the technology

Photoconduction properties in aligned assemblies of colloidal CdSe/CdS nanorods.

We report on photoconduction and optical properties of aligned assemblies of core−shell CdSe/CdS nanorods prepared by a seeded growth approach. We fabricate oriented layers of nanorods by drop casting the nanorods from a solution on substrates with prepatterned, micrometer-spaced electrodes and obtain nanorod alignment due to the coffee stain effect. The photoconductivity of the nanorod layers can be improved significantly by an annealing process under vacuum conditions. The spectral response of the photocurrent shows distinct features that can be assigned to the electronic level structure of the core−shell nanorods and that relate well to the spectra obtained by absorption measurements. We study assemblies of nanorods oriented parallel and perpendicular to the applied electric field by the combined use of photocurrent and photoluminescence spectroscopy. We obtain consistent results which show that charge carrier separation and transport are more efficient for nanorods oriented parallel to the electric fi..

Photon-induced formation of CdS nanocrystals in selected areas of polymer matrices

We demonstrate light-induced formation of semiconductor quantum dots in TOPAS (R) polymer matrix with very high control of their size and their spatial localization. Irradiation with UV laser pulses of polymer films embedding Cd thiolate precursors results in the formation of cadmium sulfide nanocrystals well confined in the irradiation area, through a macroscopically nondestructive procedure for the host matrix. With increasing number of laser pulses, we accomplish the formation of nanoparticles with gradually increasing dimensions, resulting in the dynamic change of the spectra emitted by the formed nanocomposite areas. The findings are supported by x-ray diffraction and transmission electron microscopy measurements. (C) 2007 American Institute of Physic

Determination of surface lattice strain in ZnTe epilayers on {100}GaAs by ion channeling and reflectance spectroscopy

We report on the direct measurements of surface lattice strain in ZnTe epitaxial layers on {100}GaAs substrates by ion channeling Rutherford backscattering spectrometry and low‐temperature (10 K) reflectance spectroscopy measurements. The measured ZnTe strain is the superposition of the expected thermal (tensile) strain and a thickness‐dependent residual compressive strain. Our data indicate that the removal of this residual strain is slower than the rate predicted by the equilibrium theory, following an apparent h−1/2 power‐law dependence on the epilayer thickness h, above ∼100 nm

Pathogenesis and clinical approaches to anticonvulsant hypersensitivity syndrome: current state of knowledge.

Anticonvulsant hypersensitivity syndrome (AHS) is a rare, but severe and potentially fatal, adverse reaction that occurs in patients who are treated with commonly used older anticonvulsant drugs (phenytoin, carbamazepine and phenobarbital) and/or with some newer agents (lamotrigine). Paediatric patients are at an increased risk for the development of AHS for the higher incidence of seizure disorder in the first decade of life. Hypersensitivity reactions range from simple maculopapular skin eruptions to a severe life-threatening disorder. AHS is typically associated with the development of skin rash, fever and internal organ dysfunctions. Recent evidence suggests that AHS is the result of a chemotoxic and immunologically-mediated injury, characterized by skin and mucosal bioactivation of antiepileptic drugs and by major histocompatibility complex-dependent clonal expansion of T cells. Early recognition of AHS and withdrawal of anticonvulsant therapy are essential for a successful outcome. In vivo and vitro tests can be helpful for the diagnosis that actually depends essentially on clinical recognition

FeNO as a Marker of Airways Inflammation: The Possible Implications in Childhood Asthma Management

The aim of this study was to verify FeNO usefulness, as a marker of bronchial inflammation, in the assessment of therapeutic management of childhood asthma. We performed a prospective 1-year randomized clinical trial evaluating two groups of 32 children with allergic asthma: “GINA group”, in which therapy was assessed only by GINA guidelines and “FeNO group”, who followed a therapeutic program assessed also on FeNO measurements. Asthma Severity score (ASs), Asthma Exacerbation Frequency (AEf), and Asthma Therapy score (ATs) were evaluated at the start of the study (T1), 6 months (T2), and 1 year after (T3). ASs and AEf significantly decreased only in the FeNO group at times T2 and T3 (p[T1-T2] = 0.0001, and p[T1-T3] = 0.01; p[T1-T2] = 0.0001; and p[T1-T3] < 0.0001, resp.). After six months of follow-up, we found a significant increase of patients under inhaled corticosteroid and/or antileukotrienes in the GINA group compared to the FeNO group (P = .02). Our data show that FeNO measurements, might be a very useful additional parameter for management of asthma, which is able to avoid unnecessary inhaled corticosteroid and antileukotrienes therapies, however, mantaining a treatment sufficient to obtain a meaningful improvement of asthma

Localized formation and size tuning of CdS nanocrystals upon irradiation of metal precursors embedded in polymer matrices

We present a method of spatial and dimensional controlled formation of CdS quantum dots into polymer matrices by light irradiation. The initial samples consist of Cd thiolate precursors doped in TOPAS polymer matrix. Under pulsed UV laser irradiation the precursors are photolysed driving to the nucleation of CdS nanocrystals, with increasing size and concentration, related to the number of UV pulses. The formed quantum dots are localized in the irradiated area, while the host polymer remains macroscopically unaffected by the UV irradiation. In this study we investigate how the formation of the nanocrystals (size, dimensions, and concentration) is affected by the use of different irradiation conditions (wavelength, number of pulses), revealing information about the different pathways followed during the formation. The change of the size of the dots results in the change of the peak of their emission due to the quantum size effect, which is studied by fluorescence measurements. The results are reinforced by TEM microscopy and by XRD measurements. The main advantages of the presented method are the size tuning of the produced dots and their spatial confinement inside the host matrix, not possible by the other methods used until now (thermal annealing, mixing etc.)

Comparison between laser-induced nucleation of ZnS and CdS nanocrystals directly into polymer matrices

The nucleation of two kinds of crystalline nanoparticles, zinc sulfide (ZnS), and cadmium sulfide (CdS), is achieved directly into specific sites of polymer matrices after their irradiation with UV laser pulses. The starting samples consist of polymers doped with precursors of Zn or Cd thiolate that are proved to decompose after the absorption of UV light, resulting into the nanoparticles formation. The growth of the crystalline nanostructures is followed throughout the irradiation of the samples with successive incident pulses, by different methods, such as transmission electron microscopy, atomic force microscopy, confocal microscopy, and X-ray diffraction. Special attention is paid to the difference of the formation pathways of the two kinds of nanoparticles studied, because the Cd thiolate precursor exhibits much higher absorption efficiency than the Zn thiolate one, at the applied UV wavelength. Indeed, CdS nanoparticles become evident after the very first incident UV pulses, whereas the formation of ZnS nanocrystals requires rather prolonged irradiation, always through a macroscopically nondestructive procedure for the polymer matrix. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineer