Silk Powder from Cocoons and Woven Fabric as a Potential Bio-Modifier

Silk, as a protein fiber characterized by high biocompatibility, biodegradability, and low toxicity, is mainly used as textile structures for various purposes, including for biological applications. The key issue for unlimited silk applicability as a modifier is to prepare its relevant form to cover or introduce to other materials. This study presents silk powder fabrication from Bombyx mori cocoons and non-dyed silk woven fabric through cryogenic milling. The cocoons were milled before and after the degumming process to obtain powders from raw structures and pure fibroin. The powder morphology and composition were analyzed using scanning electron microscopy and energy dispersive spectroscopy. The influence of the milling on the silk structure was studied using infrared and Raman spectroscopies, indicating that silk powders retained dominant β-sheet structure. The powders were also analyzed by differential scanning calorimetry and thermogravimetric techniques. The thermal endothermic peak and onset temperature characteristic for silk decomposition shifted to the lower values for all powders, indicating less thermal stability. However, the process was found to be an efficient way to obtain silk powders. The new milled form of silk can allow its introduction into different matrices or form coatings without using any harsh solvents, enriching them with new features and make more biologically friendly

Core/Shell Ag/SnO₂ Nanowires for Visible Light Photocatalysis

This study presents core/shell Ag/SnO2 nanowires (Ag/SnO2NWs) as a new photocatalyst for the rapid degradation of organic compounds by the light from the visible range. AgNWs after coating with a SnO2 shell change optical properties and, due to red shift of the absorbance maxima of the longitudinal and transverse surface plasmon resonance (SPR), modes can be excited by the light from the visible light region. Rhodamine B and malachite green were respectively selected as a model organic dye and toxic one that are present in the environment to study the photodegradation process with a novel one-dimensional metal/semiconductor Ag/SnO2NWs photocatalyst. The degradation was investigated by studying time-dependent UV/Vis absorption of the dye solution, which showed a fast degradation process due to the presence of Ag/SnO2NWs photocatalyst. The rhodamine B and malachite green degraded after 90 and 40 min, respectively, under irradiation at the wavelength of 450 nm. The efficient photocatalytic process is attributed to two phenomenon surface plasmon resonance effects of AgNWs, which allowed light absorption from the visible range, and charge separations on the Ag core and SnO2 shell interface of the nanowires which prevents recombination of photogenerated electron-hole pairs. The presented properties of Ag/SnO2NWs can be used for designing efficient and fast photodegradation systems to remove organic pollutants under solar light without applying any external sources of irradiation

Silver Nanowires and Silanes in Hybrid Functionalization of Aramid Fabrics

New functionalization methods of meta- and para-aramid fabrics with silver nanowires (AgNWs) and two silanes (3-aminopropyltriethoxysilane (APTES)) and diethoxydimethylsilane (DEDMS) were developed: a one-step method (mixture) with AgNWs dispersed in the silane mixture and a two-step method (layer-by-layer) in which the silanes mixture was applied to the previously deposited AgNWs layer. The fabrics were pre-treated in a low-pressure air radio frequency (RF) plasma and subsequently coated with polydopamine. The modified fabrics acquired hydrophobic properties (contact angle ΘW of 112–125°). The surface free energy for both modified fabrics was approximately 29 mJ/m2, while for reference, meta- and para-aramid fabrics have a free energy of 53 mJ/m2 and 40 mJ/m2, respectively. The electrical surface resistance (Rs) was on the order of 102 Ω and 104 Ω for the two-step and one-step method, respectively. The electrical volume resistance (Rv) for both modified fabrics was on the order of 102 Ω. After UV irradiation, the Rs did not change for the two-step method, and for the one-step method, it increased to the order of 1010 Ω. The specific strength values were higher by 71% and 63% for the meta-aramid fabric and by 102% and 110% for the para-aramid fabric for the two-step and one-step method, respectively, compared to the unmodified fabrics after UV radiation

A SnO2 shell for high environmental stability of Ag nanowires applied for thermal management

Since silver nanowires (AgNWs) show high infrared reflectance many studies present their applicability as thermal management products for various wearable textiles. However, their use for practical purposes is only partially evaluated, without focusing on improving their low atmospheric and liquid stability. This report describes a new approach for the topic and proposes a facile method of Ag nanowire passivation with a SnO2 layer for high environmental stability and retention of high infrared reflectance. The one-step passivation process of AgNWs was carried out in the presence of sodium stannate in an aqueous solution at 100 degrees C, and resulted in the formation of core/shell Ag/SnO2 nanowires. This study presents the morphological, chemical, and structural properties of Ag/SnO(2)NWs formed with a 14 nm thick SnO2 shell, consisting of 7 nm rutile-type crystals, covering the silver metallic core. The optical properties of the AgNWs changed significantly after shell formation, and the longitudinal and transverse modes in the surface plasmon resonance spectrum were red shifted as a result of the surrounding media dielectric constant changes. The passivation process protected the AgNWs from decomposition in air for over 4 months, and from dissolution in a KCN solution at concentrations up to 0.1 wt%. Moreover, the report shows the microwave irradiation effect on the shell synthesis and previously synthesised Ag/SnO(2)NWs. The post-synthesis irradiation, as well as the SnO2 shell obtained by microwave assistance, did not allow long-term stability to be achieved. The microwave-assisted synthesis process was also not fast enough to inhibit the formation of prismatic silver structures from the nanowires. The Ag/SnO(2)NWs with a shell obtained by a simple hydrolysis process, apart from showing high infra-red reflectance on the para-aramid fabric, are highly environmentally stable. The presented SnO2 shell preparation method can protect the AgNW's surface from dissolution or decomposition and facilitate the designing of durable smart wearable thermal materials for various conditions

A novel electrospun ZnO nanofibers biosensor fabrication

In this study, a ZnO nanofiber biosensor design is reported. ZnO nanofibers were obtained by electrospinning process followed by calcination. As a novel fabrication method, amorphous thin film of AIN(x) deposited by reactive magnetron sputtering, was proposed as a protective and stabilizing layer in subsequent technological processes. This allowed to use photolithography techniques for fabrication of the electrospun ZnO nanofibers sensor structures which is first time reported. The wet etching of AIN protective layer, Ti/Au ohmic contacts to ZnO fibers and polyimide passivating film have completed the design. Topography of the sensor structure was investigated using AFM and SEM. I-V measurements made for electrical characterization of ohmic contacts and nanofibers in different solutions environments including biological agent are reported