Asymmetry studies in Lambda 0/Lambda 0-bar, Xi-/Xi+ and Omega-/Omega+ production

We present a study on hyperon/anti-hyperon production asymmetries in the framework of the recombination model. The production asymmetries for Lambda 0/Lambda 0-bar, Xi-/Xi+ and Omega-/Omega+ are studied as a function of x_F. Predictions of the model are compared to preliminary data on hyperon/anti-hyperon production asymmetries in 500 GeV/c pi- p interactions from the Fermilab E791 experiment. The model predicts a growing asymmetry with the number of valence quarks shared by the target and the produced hyperons in the x_F < 0 region. In the positive x_F region, the model predicts constant asymmetries for Lambda 0/Lambda 0-bar and Omega-/Omega+ production and a growing asymmetry with x_F for Xi-/Xi+. We found a qualitatively good agreement between the model predictions and data, showing that recombination is a competitive mechanism in the hadronization process.Comment: One reference correcte

Effect of Acacia melanoxylon wood density on papermaking potential

In this work we study the behaviour in kraft cooking and papermaking of 6 Acacia melanoxylon wood chip samples, with basic densities of 449, 489, 493, 505, 514 and 616 kg/m3. The wood chip samples were screened and submitted to the kraft cooking process. Experiments were carried out with 1000-g o.d. of wood in a forced circulation digester. The cooked chips were disintegrated, screened and washed. The screened and total yields, kappa number and pulp viscosity were determined according to the standard methods. The morphological properties of pulp fibres were determined by image analysis of a diluted suspension in a flow chamber in Morfi®. The unbleached kraft pulps were submitted to a bleaching D0E1D1E2D2 sequence and their papermaking potential evaluated. The pulps were beaten in a PFI mill at 500, 2500 and 4500 revolutions under a refining intensity of 1.7 N/mm. Paper handsheets were prepared according to the Scan standard and tested regarding structural, mechanical and optical properties. Regarding the pulping potential, the pulp yield ranged between 47.7 and 57.7%. The selected wood samples provided bleached kraft pulps with markedly different biometrics characteristics. In fact, the mean values of fibre length, fibre width and coarseness ranged between 0.77 and 0.98 mm, 17.8 and 19.4 μm, 4.8 and 6.2 mg/100m, respectively. As expected, these biometrics characteristics have very high impact on paper structure, including smoothness, and on mechanical and optical properties, for the unbeaten pulps. At a given beaten level, the differences between pulps remain very high. Moreover, for a given paper density, tensile and tear strength, and light scattering coefficient are significantly different. To reach a given paper density, however, the different pulps required very different energy consumptions in beating

Upper limits on the total cosmic-ray luminosity of individual sources

In this paper, upper limits on the total luminosity of ultra-high-energy cosmic-rays (UHECR) (E > 10^18 eV) are determined for five individual sources. The upper limit on the integral flux of GeV-TeV gamma-rays is used to extract the upper limit on the total UHECR luminosity of individual sources. The correlation between upper limit on the integral GeV-TeV gamma-ray flux and upper limit on the UHECR luminosity is established through the cascading process that takes place during propagation of the cosmic rays in the background radiation fields, as explained in reference [1]. Twenty-eight sources measured by FERMI-LAT, VERITAS and MAGIC observatories have been studied. The measured upper limit on the GeV-TeV gamma-ray flux is restrictive enough to allow the calculation of an upper limit on the total UHECR cosmic-ray luminosity of five sources. The upper limit on the UHECR cosmic-ray luminosity of these sources is shown for several assumptions on the emission mechanism. For all studied sources an upper limit on the ultra-high-energy proton luminosity is also set.Fil: Anjos, R. C.. Universidade de Sao Paulo; BrasilFil: de Souza, V.. Universidade de Sao Paulo; BrasilFil: Supanitsky, Alberto Daniel. Consejo Nacional de Investigaciónes Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Astronomía y Física del Espacio. - Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Astronomía y Física del Espacio; Argentin

Effect of specified edge load on Eucalyptus globulus paper properties

Refining is an important unit operation in the paper production process and consists in the mechanical beating of the pulp fibres in an aqueous medium. The refining conditions affect fibre morphology, pulp suspension characteristics and paper properties. In this study we investigated the effect of refining intensity - given by the specific edge load (SEL) - on the fibre and paper properties. Lower refining intensity led to lower fibre cutting, lower fines generation, and lower ºSR development. Commercial Eucalyptus globulus bleached pulp was refined in a pilot refiner, using different specific edge loads (0.05; 0.1 and 0.2 J/m) and specific energy consumption of 40, 80 and 120 kWh/ton in order to evaluate paper potential. The highest specific edge load tested (0,2 J/m) resulted in a lower average fibre length, as a result of a higher fibre cutting. The papers produced presented higher mechanical resistance, but increasing refinement energy from 80 to 120 kWh/ton did not improve paper properties. On the contrary, with a lowest specific edge load (0,05 J/m), the papers obtained for different specific energy consumption exhibited lower density (i.e., higher open structure, higher air permeability and lower smoothness)

A Phenomenological Analysis of Non-resonant Charm Meson Decays

We analyse the consequences of the usual assumption of a constant function to fit non-resonant decays from experimental Dalitz plot describing charmed meson decays. We first show, using the $D^+\to \bar{K}^0\pi^+\pi^0$ decay channel as an example, how an inadequate extraction of the non-resonant contribution could yield incorrect measurements for the resonant channels. We analyse how the correct study of this decay will provide a test for the validity of factorization in D meson decays. Finally, we show how form factors could be extracted from non-resonant decays. We particularly discuss about the form factor that can be measured from the $D^+_s\to \pi^-\pi^+\pi^+$ decay. We emphasize on its relevance for the study of the decay $\tau \to \nu_{\tau} 3\pi$ and the extraction of the $a_1$ meson width.Comment: 14 pages, Latex including 6 eps figure