1-D P- and S-wave velocity models for the collision zone between the northern Tianshan mountain and the Junggar basin based on local earthquake data

We have developed crustal minimum 1-D P- and S-wave velocity models of the collision zone between the northern Tianshan mountain and the Junggar basin (86°E–89°E, 43°N–44.5°N). These two models were created through inversion of 1 370 P- and 1 396 S-wave travel times from 173 well-constrained local earthquakes recorded by the Ürümqi sparse local seismic network and temporary seismic arrays. In contrast to previous models, our results indicate relatively low velocity at both shallow (<10 km) and deep (30–45 km) depths. The shallow zone is interpreted to be the result of thick surficial sedimentary deposits, whereas the deeper anomaly is interpreted to result from ductile shearing and lower crustal flow. Additionally, we detected several transition layers under the lower crust, which may imply structural complexity of the uppermost mantle in this region. The improved models reduce the RMS residual of earthquake locations by 41.7% from 1.2 to 0.5 seconds. The more accurately located hypocenters appear to correlate with prominent local over-thrusts, which underlie an anticlinal fold belt and several blind faults. Positive station corrections are observed near the Junggar basin, which likely reflects low wave velocity; negative corrections near the Tianshan mountain and Bogda mountain suggest high wave velocity.National Natural Science Foundation (China) (Grant 41204037)China Earthquake Administration (Basic Research Project Grant 2012IES010103

Evaluation of glass forming ability of alloys

Key step of exploiting a new type BMG (Bulk Metallic Glass) is quickly judging GFA (Glass Forming Ability) of the alloys. The mole melting heats of BMGs are calculated using the weighted averages principle. The reliability and limitation of Trg criterion for GFA are discussed. The reason why Trg of BMGs is larger than 0.5 is discussed. Two new criteria for GFA, ΔHmg and ΔGg, are proposed. GFA sequence of BMGs is calculated using the ΔHmg criterion, the result agrees with that of A. Inoue and the Rc criterion. Furthermore, as an example, the Rc of the alloys developed by Chuang DONG et al is calculated using the ΔHmg and ΔGg. The ascending sequence of these alloys calculated with the ΔHmg criterion agrees with that of Chuang DONG et al. On the contrary, the result by the ΔGg criterion is in contrary with Chuang DONG et al, indicating that the ΔHmg criterion is better and more convenient than the ΔGg criterion. Calculation showed that the optimum ΔHmg is -15.16 kJ/mol

Study on Epoxy Resin Composite Reinforced with Rice Straw Fiber

In order to enhance the performance of the epoxy resin-prepared materials, straw fiber was used as the reinforcing base in this study. The principle of this study is to use the cellulose component exposed after the defibrillation of straw fiber can be further combined with the epoxy group. Firstly, the degree of defibrillation of straw fiber under three different pretreatment methods of acid, alkali and moist heat treatment was explored, and a control test was conducted with untreated straw fiber, which showed that the defibrillation of the straw fiber after alkali treatment was better than the other two methods. Secondly, to prove the comprehensive effect of the pretreatment method and straw fiber filling amount on the composite material performance, this paper carried out a tensile, bending, density and water absorption test. The results showed that when the straw fiber filling was 15%, the best performance of the composites was achieved by the alkali treatment, with tensile strength and tensile modulus reaching 1.89 KN and 3.92 MPa, bending strength and bending modulus reaching 2.00 KN and 81.65 MPa, average water absorption reaching 2.77%, and density reaching 0.957 g/cm3. Finally, the results were verified using Image J software was used for verification. After comparison, the material meets the basic requirements of high-density fiberboard material and provides a reference for preparing straw epoxy resin composites

Deficiencies in the Diagnosis and Treatment of Pulmonary Metastatic Osteosarcoma: A Chinese Multidisciplinary Survey

Background and objective Osteosarcoma is the most frequent primary cancer of bone. The incidence is higher in adolescents. Large improvement, though, has been made in the treatment of osteosarcoma under the framework of multidisciplinary team, an important prognostic factor for osteosarcoma is pulmonary metastasis. Surgical resection of lung metastases is widely accepted as the optimal modality in osteosarcoma patients. Undoubtedly, surgical resection of lung metastases is widely accepted as the optimal modality in osteosarcoma patients. However, since current conceptions within the surgical approach to lung metastasectomy involve multidisciplinary collaboration, which are highly variable,there is not neither consensus nor standardized practice patterns. We conduct a survey aiming to reveal areas of consistency in current clinical practice on lung metastasectomy among Chinese osteosarcoma high volume centers. Methods A questionnaire survey specific to the nationwide high volume centers of osteosarcoma was conducted from September 2015 to November 2015. Analyses were stratified by hospital, working duration, case volume and medical discipline. Results Of 150 invited physicians, 105 participated, resulting in an overall response rate of 70%. Forty-one percent of the responded physicians agreed with the statement that orthopedic oncology should play a predominant role in the multidisciplinary team. More than 64% of respondents chose metastasectomy as the preferred local control approach, and up to 78.1% of respondents recommended pulmonary metastasectomy for patients. Compared with orthopedic surgeons, other physicians were significantly more likely to report not advocating pulmonary metastasectomy in their practice (ORothers=0.02; 95%CI: 0.00-0.22; P=0.001), and thoracic surgeons were more likely to decide metastasectomy according to indications rather than the number limit of metastases (ORthoracic surgeons=20.93; 95%CI: 2.05-213.64; P=0.001). For the most preferred radiographic evaluation option, approximately 83% of respondents reported diagnostic use of computed tomography (CT). More than 70% of respondents reported that chest CT follow-up should be 3 months after the primary site resection; approximately 68% deemed the diagnostic accuracy of CT about 90%; most respondents (92%) recommended the extrapulmonary imaging evaluation simultaneously. Around 46% of respondents reported that survival duration longer than 6 months after pulmonary metastasectomy is beneficial. Conclusion This study offers new information about the variability in the reported management of pulmonary metastatic osteosarcoma in China, reflecting the deficiencies in unified practice patterns. The results of this survey also provide baseline data for future research and for the development of international guidelines

A novel one-dimensional supramolecular inclusion compound linked by hydrogen bonding interaction

Crystal structure analysis shows the cucurbit[6]uril host and its tetrahydrofuran (THF) guest in the Pmn2(1) crystal lattice. The crystal data and refinement parameter for the title compound are: a = 14.027(3), b = 11.807(3), c = 16.760(4) angstrom a, V = 2774.7(9) angstrom 3. For Z = 2 and Mw = 1529.52, the calculate density Dcal = 1.825 g/cm3. Hydrogen bonding interaction assembled the adjacent {[La(H2O)(6)Cl](C4H8O@C36H36N24O12)}2+1 cations into a novel one-dimensional superamolecular chain.A new coordination complex, {[La(H2O)(6)Cl](C4H8O@C36H36N24O12)}(H2O)(2)(NO3)(2), in which a THF molecule is encapsulated, is synthesized and characterized. Interestingly, the coordination complex serves as large building block for the construction of a novel one-dimensional supramolecular compound.NNSFC [20471050, 20771003, 20423002