38 research outputs found
Thermoelectric bolometers based on ultra-thin heavily doped single-crystal silicon membranes
We present ultra-thin silicon membrane thermocouple bolometers suitable for
fast and sensitive detection of low levels of thermal power and infrared
radiation at room temperature. The devices are based on 40 nm-thick strain
tuned single crystalline silicon membranes shaped into heater/absorber area and
narrow n- and p-doped beams, which operate as the thermocouple. The
electro-thermal characterization of the devices reveal noise equivalent power
of 13 pW/rtHz and thermal time constant of 2.5 ms. The high sensitivity of the
devices is due to the high Seebeck coefficient of 0.39 mV/K and reduction of
thermal conductivity of the Si beams from the bulk value. The bolometers
operate in the Johnson-Nyquist noise limit of the thermocouple, and the
performance improvement towards the operation close to the temperature
fluctuation limit is discussed.Comment: 11 pages, 3 figure
Electronic Refrigeration at the Quantum Limit
We demonstrate quantum limited electronic refrigeration of a metallic island
in a low temperature micro-circuit. We show that matching the impedance of the
circuit enables refrigeration at a distance, of about 50 um in our case,
through superconducting leads with a cooling power determined by the quantum of
thermal conductance. In a reference sample with a mismatched circuit this
effect is absent. Our results are consistent with the concept of
electromagnetic heat transport. We observe and analyze the crossover between
electromagnetic and quasiparticle heat flux in a superconductor.Comment: 5 pages, 3 figure
Operational Analysis and Medium-Term Forecasting of the Greenhouse Gas Generation Intensity in the Cryolithozone
We proposed a new approach to solving the problem of operational analysis and medium-term forecasting of the greenhouse gas generation (CO2, CH4) intensity in a certain area of the cryolithozone using data from a geographically distributed network of multimodal measuring stations. A network of measuring stations, capable of functioning autonomously for long periods of time, continuously generated a data flow of the CO2, CH4 concentration, soil moisture, and temperature, as well as a number of other parameters. These data, taking into account the type of soil, were used to build a spatially distributed dynamic model of greenhouse gas emission intensity of the permafrost area depending on the temperature and moisture of the soil. This article presented models for estimating and medium-term predicting ground greenhouse gases emission intensity, which are based on artificial intelligence methods. The results of the numerical simulations were also presented, which showed the adequacy of the proposed approach for predicting the intensity of greenhouse gas emissions
Silicon Based Nano-Thermoelectric Bolometers for Infrared Detection
The state-of-the-art infrared (IR) detection uses quantum photodetectors and bolometers. Quantum IR photodetectors are expensive and require cooling, and exotic and toxic materials. Whereas, bolometers are cost-efficient and uncooled, but they are much slower and less sensitive. Recently we have demonstrated that ultra-thin, highly-doped silicon membranes can be used to build fast and highly-sensitive thermoelectric bolometers. We present the fabrication of these devices, electro-thermal characterization results, and estimate the full potential of this technology
Quasiperiodic one-dimensional photonic crystals with adjustable multiple photonic band gaps
We propose an elegant approach to produce photonic band gap structures with multiple photonic band gaps (PBGs) by constructing quasiperiodic photonic crystals (QPPCs) composed by a superposition of photonic lattices with different periods. Generally QPPC structures exhibit both aperiodicity and multiple PBGs due to their long-range order. They are described by a simple analytical expression instead of quasiperiodic tiling approaches based on substitution rules. Here we describe the optical properties of quasiperiodic photonic crystals exhibiting two PBGs that can be tuned independently. PBG interband spacing and their depths can be varied by choosing appropriate reciprocal lattice vectors and their amplitudes. These effects are confirmed by the proof- of-concept measurements made for the porous silicon based QPPC of the appropriate design
Quasiperiodic one-dimensional photonic crystals with adjustable multiple photonic band gaps
We propose an elegant approach to produce photonic band gap structures with multiple photonic band gaps (PBGs) by constructing quasiperiodic photonic crystals (QPPCs) composed by a superposition of photonic lattices with different periods. Generally QPPC structures exhibit both aperiodicity and multiple PBGs due to their long-range order. They are described by a simple analytical expression instead of quasiperiodic tiling approaches based on substitution rules. Here we describe the optical properties of quasiperiodic photonic crystals exhibiting two PBGs that can be tuned independently. PBG interband spacing and their depths can be varied by choosing appropriate reciprocal lattice vectors and their amplitudes. These effects are confirmed by the proof- of-concept measurements made for the porous silicon based QPPC of the appropriate design
Synthesis of epitaxial films based on Ge-Si-Sn materials with Ge/GeSn, Ge/GeSiSn, and GeSn/GeSiSn heterojunctions
Results of investigations into the synthesis of heterostructures based on Ge–Si–Sn materials by the method of low-temperature molecular beam epitaxy are presented. The formation of epitaxial films during structure growth has been controlled by the reflection high-energy electron diffraction method. Films with Ge/GeSn, Ge/GeSiSn, and GeSn/GeSiSn heterojunctions are grown with Sn content changing from 2 to 10 % at temperatures in the interval 150–350°С. The stressed state, the composition, and the lattice parameter are studied by the x-ray diffraction method using Omega-scan curves and reciprocal space maps. A tensile strain in the Ge film during Ge/Ge0.9Sn0.1/Si structure growth has reached 0.86%
Thermionic junction devices utilizing phonon blocking
Electrothermal elements are used in various energy harvesters, coolers, and radiation detectors. The optimal operation of these elements relies on mastering two competing boundary conditions: the maximization of the electrothermal response and the blockade of lattice (phonon) thermal conduction. In this work, we propose and demonstrate that efficient electrothermal operation and phonon blocking can be achieved in solid-state thermionic junctions, paving the way for new phonon-engineered high-efficiency refrigerators and sensors. Our experimental demonstration uses semiconductor-superconductor (Sm-S) junctions where the electrothermal response arises from the superconducting energy gap and the phonon blocking results from the acoustic transmission bottleneck at the junction. We demonstrate a cooling platform where a silicon chip, suspended only from the Sm-S junctions, is cooled by ~40% from the bath temperature. We also show how the observed effect can be used in radiation detectors and multistage electronic refrigerators suitable for cooling of quantum technology devices.</p