Health Surveillance and Response to SARS-CoV-2 Mass Testing in Health Workers of a Large Italian Hospital in Verona, Veneto

Italy presented the first largest COVID-19 outbreak outside of China. Veneto currently ranks fourth among the Italian regions for COVID-19 confirmed cases (~19,000). This study presents health surveillance data for SARS-CoV-2 in 6100 health workers (HW) employed in a large public hospital. Workers underwent oropharyngeal and nasopharyngeal swabs, with a total of 5942 participants (97.5% of the population). A total of 11,890 specimens were tested for SARS-CoV-2 infection using PCR, identifying the viral genes E, RdRP, and N. Positive tests were returned for 238 workers (cumulative incidence of 4.0%, similar in both COVID and nonCOVID units). SARS-CoV-2 risk was not affected by gender, age, or job type, whereas work setting and occupation were both predictors of infection. The risk was higher in medical wards (OR 2.7, 95% CI 1.9\u20133.9) and health services (OR 4.3, 95% CI 2.4\u20137.6), and lower in surgical wards and administration areas. To our knowledge, this study represents the largest available HW case list swab-tested for SARS-CoV-2, covering almost the total workforce. Mass screening enabled the isolation of HW, improved risk assessment, allowed for close contacts of and infected HW to return to work, provided evidence of SARS-CoV-2 diffusion, and presented solid ground to prevent nosocomial SARS-CoV-2 infections. The ongoing concurrent sero-epidemiological study aims to enable the improvement of health surveillance to maintain the safety of HWs and the communities they serve

SARS-CoV-2 infection in health workers: analysis from Verona SIEROEPID Study during the pre-vaccination era

Background: To report the baseline phase of the SIEROEPID study on SARS-CoV-2 infection seroprevalence among health workers at the University Hospital of Verona, Italy, between spring and fall 2020; to compare performances of several laboratory tests for SARS-CoV-2 antibody detection. Methods: 5299 voluntary health workers were enrolled from 28 April 2020 to 28 July 2020 to assess immunological response to SARS-CoV-2 infection throughout IgM, IgG and IgA serum levels titration by four laboratory tests. Association of antibody titre with several demographic variables, swab tests and performance tests (sensitivity, specificity, and agreement) were statistically analyzed. Results: The overall seroprevalence was 6%, considering either IgG and IgM, and 4.8% considering IgG. Working in COVID-19 Units was not associated with a statistically significant increase in the number of infected workers. Cohen's kappa of agreement between MaglumiTM and VivaDiagTM was quite good when considering IgG only (Cohen's kappa = 78.1%, 95% CI 74.0-82.0%), but was lower considering IgM (Cohen's kappa = 13.3%, 95% CI 7.8-18.7%). Conclusion: The large sample size with high participation (84.7%), the biobank and the longitudinal design were significant achievements, offering a baseline dataset as the benchmark for risk assessment, health surveillance and management of SARS-CoV-2 infection for the hospital workforce, especially considering the ongoing vaccination campaign. Study results support the national regulator guidelines on using swabs for SARS-CoV-2 screening with health workers and using the serological tests to contribute to the epidemiological assessment of the spread of the virus

Managing the Peri-implant Mucosa: A Clinically Reliable Method for Optimizing Soft Tissue Contours and Emergence Profile

STATE OF THE PROBLEM: The proper representation of soft tissue contours for a natural aspect of the peri-implant mucosa and its mimesis with the adjacent teeth is a crucial aspect of the esthetic area restoration. PURPOSE: This paper describes a method for the easy transfer of the peri-implant tissue morphology onto impression material with a view to achieving an accurate, custom implant restoration. The procedure described is suitable both for single and multi-unit implant-supported prostheses. CLINICAL PROCEDURES: Once the peri-implant mucosa is sculpted by the provisional restoration, the emergence profile is duplicated. The implant analog is embedded into laboratory stone or plaster in a mixing cup and allowed to set. The provisional restoration is removed from the oral cavity and screwed to the implant analog; then, a polyether material is placed in the mixing cup so that the provisional restoration is put into impression material at the level of the prosthetic emergence profile. After the polyether polymerizing, the provisional prosthesis is unscrewed and replaced with the stock hexed transfer for the final impression. Next, cold self-curing resin is poured into this gap and left to set. A custom transfer for this single implant site is thus obtained. This modified transfer is then removed and screwed onto the implant in the oral cavity for the definitive impression. CONCLUSIONS: The technique described enables a faithful reproduction of the peri-implant soft tissues and emergence profile. CLINICAL SIGNIFICANCE: An emergence profile that mimics the natural tooth should be obtained by successful esthetic implant restoration. Moreover, it allows proper hygiene, which is fundamental for implant maintenance. The best way to achieve the correct emergence profile is to sculpture the peri-implant mucosa by means of a provisional prosthesis. Prefabricated provisional crowns cannot mimic the complexity and the variations of human soft tissue. Therefore, only a chair-side modification of the provisional restoration can accomplish the optimal result. Such a requirement can be satisfied by the clinical method described in the present report

Clinical outcomes of implant- versus abutment-level connection in screw-retained fixed dental prostheses : A 5-year randomized controlled trial.

AIM: The aim of the study was to evaluate the 5 years clinical outcomes associated with implant-level connection (IL) versus abutment-level connection (AL) for implants with an internal conical connection (ICC) supporting a screw-retained fixed partial denture. MATERIALS AND METHODS: Fifty patients with 119 implants were randomly allocated to either the AL or IL group. Radiographic (Marginal bone loss) and clinical outcomes (Bleeding on Probing, probing pocket depth, plaque accumulation, incidence of peri-implantitis and peri-implant mucositis as well as prosthetic complications) were collected and compared at 1, 2, 3, and 5 years. A linear mixed model was used to evaluate the differences between groups. RESULTS: Five years after treatment, the MBL change was not significantly different between the groups at any point. The MBL was 0.23 ± 0.64 mm (AL) and 0.23 ± 0.29 mm (IL). The bleeding on Probing was 44% (AL) and 45% (IL) (p = .89). The mean probing depth was 2.91 ± 1.01 mm (AL) and 3.51 ± 0.67 mm (IL). This difference between the groups was statistically significant but clinical insignificant. Presence of plaque was slightly higher (p = .06) in the IL group (34.4%) compared with the AL group (26.3%). The overall technical, biological, and prosthetic complication rates were similar between groups. None of the implants developed peri-implantitis during the entire follow-up period. CONCLUSION: The results of this clinical trial indicated that all clinical and radiographical parameters were clinically comparable between the study groups

Dimensions of the healthy gingiva and peri-implant mucosa.

Objective: To determine the dimensions of the soft tissue cuff present at various aspects of teeth and to compare these dimensions to those of the mucosa surrounding single implants. Material and methods: Fifty volunteers were recruited that were ≥25 years of age and exhibited no signs of (i) untreated caries; (ii) loss of periodontal tissue support in the incisor, canine, and premolar regions; (iii) systemic or local disease. Furthermore, among the 50 patients recruited (iV), 27 had one single implant in the maxilla with teeth present mesial and/or distal to the implant. Probing pocket depth (PPD) and transmucosal sounding depth (TS) were assessed by five experienced, carefully calibrated examiners and with the use of a periodontal probe at the proximal (mesial, distal) and flat (facial, buccal and palatal/lingual) surfaces of all teeth/implants. The width of the keratinized mucosa (KM) was also determined. Results: It was demonstrated that (i) PPD and TS were greater at proximal than at flat surfaces at both tooth and implant sites. In addition, both PPD and TS were deeper at implant than at tooth sites. The TS values documented that the cuff of healthy soft tissue that surrounded a tooth varied between 2 mm at flat surfaces and 4 mm at proximal surfaces, while at implant sites, the mucosa at proximal as well as flat surfaces was 1–1.5 mm greater. Conclusion: The probing pocket depth (PPD) and the transmucosal sounding depth (TS) values were greater at proximal than at flat, that is, facial/palatal (lingual) surfaces at tooth sites and frequently also at implant sites. Furthermore, the PPD and the TS dimensions were greater at implant than at adjacent tooth sites

Virtual abutment design : a concept for delivery of CAD/CAM customized abutments-- report of a retrospective cohort

This report presents early clinical experiences with the treatment of a consecutive cohort of 89 patients who received 125 prostheses supported by 205 milled abutments. Abutments were fabricated using unique computer-aided design software to deliver both titanium and zirconia abutments based on idealized values for tooth dimensions and emergence profiles as well as on a scan of the proposed definitive prosthesis

Fully digital workflow for implant-supported fixed restorations consisting of a titanium primary structure and a zirconia secondary structure

Purpose: To describe a fully digital workflow for an implant-supported fixed hybrid restoration that involves a double CAD/CAM structure and to highlight the benefits of this type of restoration. Materials and methods: Using a fully digital workflow, starting from intraoral scans, the necessary steps for producing the final hybrid prosthesis are described. The prosthesis consists of a titanium primary structure and a zirconia secondary structure that is cemented onto the primary structure in the laboratory. A clinical case is presented to illustrate the steps required for prosthetic rehabilitation. Results: This technique enables the fabrication of clinically valid and passive prostheses using a fully digital workflow. Conclusion: In just three clinical sessions, a fully digital workflow makes it possible to produce robust implant-supported fixed hybrid prostheses, comprising a titanium primary structure and an outer secondary structure made of zirconia. This procedure can be applied to a wide range of cases from simple to extended, including full-arch restorations

Interproximal Papilla Stability Around CAD/CAM and Stock Abutments in Anterior Regions: A 2-Year Prospective Multicenter Cohort Study

The aim of this study was to compare the interproximal papilla stability of restorations supported by computer-aided design/computer-assisted manufacture (CAD/CAM) abutments to those supported by prefabricated stock abutments in anterior areas over a 2-year follow-up. Abutments were selected depending on implant inclination and thickness of buccal peri-implant soft tissues from the following: zirconia stock, titanium stock, zirconia CAD/CAM and titanium CAD/CAM. Differences between the height of the papilla tip were measured (REC)

Consensus Report by the Italian Academy of Osseointegration on the Use of Graft Materials in Postextraction Sites

Purpose: After tooth extraction, a modeling and remodeling phase of bone and soft tissues occurs. It has been fully demonstrated that bone resorption as high as 50% can take place regarding ridge width and a variable amount concerning ridge height, making it difficult to perform implant surgery. Materials and Methods: Active members of the Italian Academy of Osseointegration (IAO) participated in this Consensus Conference, and three systematic reviews were conducted before the meeting to provide guidelines on alveolar ridge preservation procedures. The systematic reviews covered the following topics: (1) What material best preserves the dimensions of the ridge horizontally and vertically?; (2) what material favors the formation of the highest quantity of new bone?; (3) which technique would best seal the socket?; and (4) what effect does alveolar ridge preservation have on soft tissues? Results: The main conclusions reached by the assembly were that alveolar ridge preservation is advisable after dental extraction, particularly in esthetic areas, in proximity of anatomical structures (ie, maxillary sinus, inferior alveolar nerve, and mental foramen), whenever the treatment plan requires delayed placement, and whenever patients ask to postpone implant insertion for various reasons. Socket debridement is advised before the use of a "regenerative material," and xenograft is considered the gold standard material to maintain ridge dimensions. Another indication is antibiotic therapy, which is recommended in the case of alveolar ridge preservation (amoxicillin 2 g 1 hour before the intervention and 1 g every 12 hours for 6 days). A membrane or autologous soft tissue should be used to seal the socket and protect the regenerative material, and the indicated reentry time (implant insertion) is 4 to 6 months. Conclusion: This Consensus Conference agreed that the adoption of alveolar ridge preservation can effectively prevent physiologic bone loss, especially in esthetic areas. It is recommended to cover the xenograft material with a membrane or autologous soft tissue, and antibiotic therapy is advisable