Resonance fluorescence of a site-controlled quantum dot realized by the buried-stressor growth technique

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 110, 111101 (2017) and may be found at https://doi.org/10.1063/1.4978428.Site-controlled growth of semiconductor quantum dots (QDs) represents a major advancement to achieve scalable quantum technology platforms. One immediate benefit is the deterministic integration of quantum emitters into optical microcavities. However, site-controlled growth of QDs is usually achieved at the cost of reduced optical quality. Here, we show that the buried-stressor growth technique enables the realization of high-quality site-controlled QDs with attractive optical and quantum optical properties. This is evidenced by performing excitation power dependent resonance fluorescence experiments at cryogenic temperatures showing QD emission linewidths down to 10 μeV. Resonant excitation leads to the observation of the Mollow triplet under CW excitation and enables coherent state preparation under pulsed excitation. Under resonant π-pulse excitation we observe clean single-photon emission associated with g(2)(0) = 0.12 limited by non-ideal laser suppression.EC/FP7/615613/EU/External Quantum Control of Photonic Semiconductor Nanostructures/EXQUISIT

Entwicklung einer neuartigen Prüfanlage zur Prüfung von Bauelementen aus Formgedächtnisteilen

Im Rahmen des Forschungsvorhabens, unterstützt durch das Förderprogramm des BMBF „Anwendungsorientierte Forschung und Entwicklung an Fachhochschulen“ (aFuE), soll eine voll automatisierte, universale Prüfanlage gebaut werden mit deren Hilfe es möglich ist, das Verhalten von Formgedächtnislegierungen (FGL) bei der Variation verschiedener Parameter zu ermitteln. Die Prüfanlage soll in erster Linie sehr genau die Phasenumwandlungstemperaturen der Formgedächtnislegierungen ermitteln, um damit einen tieferen Einblick in die metallkundlichen Hintergründe zu gewinnen. Aber es gibt auch weitere Anwendungen wie zum Beispiel das so genannte „Training“, indem man durch gezielte thermische und mechanische Belastungen den FGL verschiedene Formgedächtniseffekte trainiert. Ein weiteres Ziel des Forschungsvorhabens ist das Erstellen einer Prüfnorm für FGL die den gesamten Prüfablauf dokumentieren und ergänzen wird. Letztendlich soll die Prüfeinrichtung eine Plattform für die Weiterentwicklung der existierenden FG-Anwendungen sein, sowie die Einsatzmöglichkeiten dieser Werkstoffe zu erweitern. Da es derzeit keine Normung für Bauteile aus FGL gibt, soll in den erfolgten Tests ein Vorschlag für eine FG-Normung gemacht werden. Förderkennziffer 17 092 0

Operating single quantum emitters with a compact Stirling cryocooler

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Review of Scientific Instruments 86, 013113 (2015) and may be found at https://doi.org/10.1063/1.4906548.The development of an easy-to-operate light source emitting single photons has become a major driving force in the emerging field of quantum information technology. Here, we report on the application of a compact and user-friendly Stirling cryocooler in the field of nanophotonics. The Stirling cryocooler is used to operate a single quantum emitter constituted of a semiconductor quantum dot (QD) at a base temperature below 30 K. Proper vibration decoupling of the cryocooler and its surrounding enables free-space micro-photoluminescence spectroscopy to identify and analyze different charge-carrier states within a single quantum dot. As an exemplary application in quantum optics, we perform a Hanbury-Brown and Twiss experiment demonstrating a strong suppression of multi-photon emission events with g(2)(0) < 0.04 from this Stirling-cooled single quantum emitter under continuous wave excitation. Comparative experiments performed on the same quantum dot in a liquid helium (LHe)-flow cryostat show almost identical values of g(2)(0) for both configurations at a given temperature. The results of this proof of principle experiment demonstrate that low-vibration Stirling cryocoolers that have so far been considered exotic to the field of nanophotonics are an attractive alternative to expensive closed-cycle cryostats or LHe-flow cryostats, which could pave the way for the development of high-quality table-top non-classical light sources.BMBF, 03V0630, Entwicklung einer Halbleiterbasierten Einzelphotonenquelle für die Quanteninformationstechnologie (QSOURCE)DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, Bauelement

230 s room-temperature storage time and 1.14 eV hole localization energy in In0.5Ga0.5As quantum dots on a GaAs interlayer in GaP with an AlP barrier

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 106, 042102 (2015) and may be found at https://doi.org/10.1063/1.4906994.A GaP n+p-diode containing In0.5Ga0.5As quantum dots (QDs) and an AlP barrier is characterized electrically, together with two reference samples: a simple n+p-diode and an n+p-diode with AlP barrier. Localization energy, capture cross-section, and storage time for holes in the QDs are determined using deep-level transient spectroscopy. The localization energy is 1.14(±0.04) eV, yielding a storage time at room temperature of 230(±60) s, which marks an improvement of 2 orders of magnitude compared to the former record value in QDs. Alternative material systems are proposed for still higher localization energies and longer storage times

Two-photon interference from remote deterministic quantum dot microlenses

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 110, 011104 (2017) and may be found at https://doi.org/10.1063/1.4973504.We report on two-photon interference (TPI) experiments using remote deterministic single-photon sources. Employing 3D in-situ electron-beam lithography, we fabricate quantum-light sources at specific target wavelengths by integrating pre-selected semiconductor quantum dots within monolithic microlenses. The individual single-photon sources show TPI visibilities of 49% and 22%, respectively, under pulsed p-shell excitation at 80 MHz. For the mutual TPI of the remote sources, we observe an uncorrected visibility of 29%, in quantitative agreement with the pure dephasing of the individual sources. Due to its efficient photon extraction within a broad spectral range (>20 nm), our microlens-based approach is predestinated for future entanglement swapping experiments utilizing entangled photon pairs emitted by distant biexciton-exciton radiative cascades.DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, BauelementeEC/FP7/615613/EU/External Quantum Control of Photonic Semiconductor Nanostructures/EXQUISIT

Advanced in-situ electron-beam lithography for deterministic nanophotonic device processing

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Review of Scientific Instruments 86, 073903 (2015) and may be found at https://doi.org/10.1063/1.4926995.We report on an advanced in-situ electron-beam lithography technique based on high-resolution cathodoluminescence (CL) spectroscopy at low temperatures. The technique has been developed for the deterministic fabrication and quantitative evaluation of nanophotonic structures. It is of particular interest for the realization and optimization of non-classical light sources which require the pre-selection of single quantum dots (QDs) with very specific emission features. The two-step electron-beam lithography process comprises (a) the detailed optical study and selection of target QDs by means of CL-spectroscopy and (b) the precise retrieval of the locations and integration of target QDs into lithographically defined nanostructures. Our technology platform allows for a detailed pre-process determination of important optical and quantum optical properties of the QDs, such as the emission energies of excitonic complexes, the excitonic fine-structure splitting, the carrier dynamics, and the quantum nature of emission. In addition, it enables a direct and precise comparison of the optical properties of a single QD before and after integration which is very beneficial for the quantitative evaluation of cavity-enhanced quantum devices.DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, Bauelement

Efficient single-photon source based on a deterministically fabricated single quantum dot - microstructure with backside gold mirror

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 111, 011106 (2017) and may be found at https://doi.org/10.1063/1.4991389.We present an efficient broadband single-photon source which is fabricated by a flip-chip gold-bonding technique and in-situ electron beam lithography. The device comprises a single InGaAs quantum dot that is centered at the bottom of a monolithic mesa structure and located above a gold mirror for enhanced photon-extraction efficiency. We show a photon-extraction efficiency of ηext=(18±2) % into a numerical aperture of 0.4 and a high suppression of multi-photon events from this source with g(2)(0)=0.015±0.009. Our deterministic device with a backside gold mirror can be combined with electrical contacts and piezo-tuning capabilities in future refinements, which represents an important step towards a spectrally tunable plug-and-play quantum-light source with broadband enhancement for photonic quantum networks.DFG, SFB 787, Halbleiter - Nanophotonik: Materialien, Modelle, BauelementeBMBF, 03V0630TIB, Entwicklung einer Halbleiterbasierten Einzelphotonenquelle für die Quanteninformationstechnologi

Strong amplitude-phase coupling in submonolayer quantum dots

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 109, 201102 (2016) and may be found at https://doi.org/10.1063/1.4967833.Submonolayer quantum dots promise to combine the beneficial features of zero- and two-dimensional carrier confinement. To explore their potential with respect to all-optical signal processing, we investigate the amplitude-phase coupling (α-parameter) in semiconductor optical amplifiers based on InAs/GaAs submonolayer quantum dots in ultrafast pump-probe experiments. Lateral coupling provides an efficient carrier reservoir and gives rise to a large α-parameter. Combined with a high modal gain and an ultrafast gain recovery, this makes the submonolayer quantum dots an attractive gain medium for nonlinear optical signal processing

Generating single photons at gigahertz modulation-speed using electrically controlled quantum dot microlenses

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 108, 021104 (2016) and may be found at https://doi.org/10.1063/1.4939658.We report on the generation of single-photon pulse trains at a repetition rate of up to 1 GHz. We achieve this speed by modulating the external voltage applied on an electrically contacted quantum dot microlens, which is optically excited by a continuous-wave laser. By modulating the photoluminescence of the quantum dot microlens using a square-wave voltage, single-photon emission is triggered with a response time as short as (281 ± 19) ps, being 6 times faster than the radiative lifetime of (1.75 ± 0.02) ns. This large reduction in the characteristic emission time is enabled by a rapid capacitive gating of emission from the quantum dot, which is placed in the intrinsic region of a p-i-n-junction biased below the onset of electroluminescence. Here, since our circuit acts as a rectifying differentiator, the rising edge of the applied voltage pulses triggers the emission of single photons from the optically excited quantum dot. The non-classical nature of the photon pulse train generated at GHz-speed is proven by intensity autocorrelation measurements with g(2)(0) = 0.3 ± 0.1. Our results combine optical excitation with fast electrical gating and thus show promise for the generation of indistinguishable single photons at rates exceeding the limitations set by the intrinsic radiative lifetime.BMBF, 03V0630, Entwicklung einer Halbleiterbasierten Einzelphotonenquelle für die Quanteninformationstechnologie (QSOURCE)DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, Bauelement