3,096 research outputs found
Effect of salt concentrations on the growth of heat-stressed and unstressed escherichia coli
The effect sodium chloride (NaCl) and potassium chloride (KCl) concentration on the growth of Escherichia coli cells cultivated at 37 and 44°C was studied in an effort to understand the importance of the salts and glucose in medium to the growth of E. coli. A turbidimetric method was used to measure the growth of E. coli after a 24 hours incubation period. The turbidimetric method used gave a high correlation (R2 = 0.9606) with the traditional surface colony count method. Four sets of salt concentrations, 0, 0.5, 1.0 and 1.5% (w/v), were employed throughout this study. Absence of NaCl in the medium was found to slightly decrease the growth of E. coli at 37°C. E. coli grew optimally at 0.5% (w/v) NaCl concentration. Addition of 0.5% KCl was found to have less beneficial effect on the growth of E. coli at 37°C compared to cells grown in medium with 0.5% NaCl. Increase in the concentrations of both salts above 0.5% decreased growth at 37°C. The extent to which growth was suppressed was directly proportional to the concentration of salts. At zero concentration of both salts, growth of E. coli was very low at 44°C. Increase in the concentrations of both NaCl and KCl from 0.5% to 1.5% resulted in growth enhancement. Glucose affected significantly the growth of E. coli at 37°C. Addition of 140 mM (w/ v) of glucose to the medium increased the growth of E. coli at 37°C to a greater extent than was obtained by salt addition. However, the addition of the same concentration of glucose was found to have only a very slight effect on growth at 44°C
Inactivation of Campylobacter jejuni by exposure to high-intensity 405-nm visible light
Although considerable research has been carried out on a range of environmental factors that impact on the survival of Campylobacter jejuni, there is limited information on the effects of violet/blue light on this pathogen. This investigation was carried out to determine the effects of high-intensity 405-nm light on C. jejuni and to compare this with the effects on two other important Gram-negative enteric pathogens, Salmonella enteritidis and Escherichia coli O157:H7. High-intensity 405-nm light generated from an array of 405-nm light-emitting diodes was used to inactivate the test bacteria. The results demonstrated that while all three tested species were susceptible to 405-nm light inactivation, C. jejuni was by far the most sensitive organism, requiring a total dose of 18J cm−2 of 405-nm light to achieve a 5-log10 reduction. This study has established that C. jejuni is particularly susceptible to violet/blue light at a wavelength of 405nm. This finding, coupled with the safety-in-use advantages of this visible (non-ultraviolet wavelength) light, suggests that high-intensity 405-nm light may have applications for control of C. jejuni contamination levels in situations where this type of illumination can be effectively applied
High-energy laser-pulse self-compression in short gas-filled fibers
We examine the spatiotemporal compression of energetic femtosecond laser pulses within short gas-filled fibers. The study is undertaken using an advanced nonlinear pulse propagation model based on a multimode generalized nonlinear Schrödinger equation that has been modified to include plasma effects. Plasma defocusing and linear propagation effects are shown to be the dominant processes within a highly dynamical mechanism that enables 100-fs pulses to be compressed into the few-cycle regime after <50 mm of propagation. Once the mechanism has been introduced, parameter spaces are explored and compressor designs suitable for performing high-field experiments in situ are presented. We finish by showing how these designs may be extended to novel wavelengths and driving pulses delivered by state-of-the-art high-repetition-rate lasers
Effect of HINS light on the contraction of fibroblast populated collagen lattices
High intensity narrow spectrum (HINS) light has been shown to have bactericidal effects on a range of medically important bacteria[1]. HINS technology could potentially be useful as a method for disinfecting medical implants, tissue engineered constructs and wounds. The fibroblast populated collagen lattice (FPCL) was used as an in vitro model to investigate the effect of HINS light on the wound contraction phase of wound healing
Impact of varying intensities of blue-light exposure on 3T3 cells
There is the need to develop a compatible sterilisation method for hybrid biomaterials. High-intensity blue light in the 405 nm region has been shown to be an effective bacterial decontamination method [1], to cause no noticeable damage to the gross structure of type-I collagen monomer (when treated at 10 mW/cm2) [2], and to have no noticeable effect on 3T3 cell viability, growth rate, redox state or lactate dehydrogenase (LDH) leakage (at 1.0 mW/cm2) [2]. The purpose of this research was to investigate the effect of varying the blue-light intensity on the 3T3 cell response parameters
Inactivation of pathogens on food and contact surfaces using ozone as a biocidal agent
This study focuses on the inactivation of a range of food borne pathogens using ozone as a biocidal agent. Experiments were carried out using Campylobacter jejuni, E. coli and Salmonella enteritidis in which population size effects and different treatment temperatures were investigate
Combined treatment of biomatrices with nisin and pulsed electric fields as a potential decontamination method?
Pulsed electric field (PEF) treatment has been shown to achieve bacterial inactivation in collagen gels whilst retaining the ability of the collagen to function as a biomaterial [1, 2]. Nisin, an antimicrobial peptide, has been used widely as a food preservative and has shown bactericidal action against a number of Gram-positive bacteria [3]. The potential of nisin to increase the efficacy of PEF disinfection of collagen gels to be used for tissue engineering applications was investigated
Experimental demonstration of a high-flux capillary based XUV source in the high ionisation regime
High harmonic generation (HHG) has proven to be a fascinating and incredibly useful nonlinear optical phenomenon and has led to the realisation of tabletop sources of coherent extreme ultraviolet (XUV) radiation. Capillary based geometries in particular have attracted a great deal of attention due to their lengthy interaction regions and the potential to phase-match the HHG process leading to a large increase in XUV flux. Unfortunately due to plasma induced nonlinear and dispersive effects the simple phase-matching mechanism detailed in [1] cannot be scaled to high energy pump pulses and high gas pressures. In this work we have used a computational model [2] to design a capillary that can support a broad interaction region well-suited to quasi-phase-matching (QPM) while simultaneously reducing the effect that XUV reabsorption has on the output flux of the source. This modelling work has involved adjusting both the capillary length and gas density profile (figure 1a) in order to produce rapid oscillations in the radially integrated ionization fraction (figure 1b) coupled with a rapid decrease in gas pressure at the capillary exit. Our theory suggests that these oscillations are driven by a nonlinear self-compression process modulating the intensity of the pump pulse as it propagates through the plasma-filled waveguide [3]. Subsequent experimental work has shown an increase in XUV flux of almost 50 times over our previous capillary-based source (see figure 1c), and preliminary estimates suggest a photon flux of 1012 photons s-1 harmonic-1 in the 45 eV spectral region
The Sort on Radioactive Waste Type model: A method to sort single-shell tanks into characteristic groups. Revision 2
The SORWT model presents a methodology to group SSTs that is both simple to understand and logical in its assumptions and construction. The SORWT model has predicted the existence of 24 groups of SSTs ranging from 22 tanks per group to two tanks per group. These 24 groups encompass 133 tanks and 93% of the total waste contained in SSTs. The first 14 groups (i.e., those that contain four tanks per group or more) represent 109 tanks and 83% of the total waste volume. This demonstrates the potential for using the SORWT model to efficiently allocate resources and to maximize characterization information gained by a minimum number of sampling events. The verification study has shown that the SST groups predicted by the SORWT model are statistically significant and reduce the variability in the concentrations for all analytes examined. The SORWT model organizes a vast amount of information and presents clear options on which SSTs are more desirable to sample. The model is also simple and flexible in its ability to incorporate new parameters such as new SST analytical data, shifting programmatic needs, and/or risk assessment-oriented criteria. This report presents the nominal composition, inventory, and uncertainty for five of the 24 SORWT groups, representing 28 tanks, 10% of the total waste volume, and 29% of the total sludge volume in SSTs. Consequently, this document provides a logical beginning framework for tank waste characterization until further information becomes available or different programmatic needs are identified
Efficacy of antimicrobial 405 nm blue-light for inactivation of airborne bacteria
Airborne transmission of infectious organisms is a considerable concern within the healthcare environment. A number of novel methods for ‘whole room’ decontamination, including antimicrobial 405 nm blue light, are being developed. To date, research has focused on its effects against surface-deposited contamination; however it is important to also establish its efficacy against airborne bacteria. This study demonstrates evidence of the dose-response kinetics of airborne bacterial contamination when exposed to 405 nm light.Bacterial aerosols of Staphylococcus epidermidis, generated using a 6-Jet Collison nebuliser, were introduced into an aerosol chamber designed to maintain prolonged airborne suspension and circulation. Aerosolized bacteria were exposed to increasing doses of 405 nm light, and air samples were extracted from the chamber using a BioSampler liquid impinger, with viability analysed using pour-plate culture. Initial results have demonstrated successful aerosol inactivation, with a 98.4% reduction achieved with 1-hour exposure to low irradiance (11.9 mWcm-2) 405 nm light (P=<0.001). Natural decay of the suspended aerosol was observed, however this was significantly less than achieved with light treatment (P=0.004). Overall, results have provided early evidence of the susceptibility of bacterial aerosols to 405 nm light. Although less germicidally efficient than UV-light, 405 nm light treatment offers benefits in terms of increased safety for human exposure, and eradication of microbes regardless of antibiotic resistance. Such benefits provide advantages for a number of applications including ‘whole room’ environmental decontamination, in which reducing levels of airborne bacteria should reduce the number of infections arising from airborne contamination
- …