NIR Luminescent Oxygen-Sensing Nanoparticles for Continuous Glucose and Lactate Monitoring

A highly sensitive, biocompatible, and scalable phosphorescent oxygen sensor formulation is designed and evaluated for use in continuous metabolite sensors for biological systems. Ethyl cellulose (EC) and polystyrene (PS) nanoparticles (NPs) stabilized with Pluronic F68 (PF 68), Polydimethylsiloxane-b-polyethyleneglycol methyl ether (PDMS-PEG), sodium dodecylsulfate (SDS), and cetyltimethylammonium bromide (CTAB) were prepared and studied. The resulting NPs with eight different surfactant–polymer matrix combinations were evaluated for physical properties, oxygen sensitivity, effect of changes in dispersion matrix, and cytotoxicity. The EC NPs exhibited a narrower size distribution and 40% higher sensitivity than PS, with Stern–Volmer constants (Ksv) 0.041–0.052 µM−1 for EC, compared to 0.029–0.034 µM−1 for PS. Notably, ethyl cellulose NPs protected with PF68 were selected as the preferred formulation, as they were not cytotoxic towards 3T3 fibroblasts and exhibited a wide phosphorescence lifetime response of >211.1 µs over 258–0 µM and ~100 µs over 2.58–0 µM oxygen, with a limit of detection (LoD) of oxygen in aqueous phase of 0.0016 µM. The EC-PF68 NPs were then efficiently encapsulated in alginate microparticles along with glucose oxidase (GOx) and catalase (CAT) to form phosphorescent nanoparticles-in-microparticle (NIMs) glucose sensing microdomains. The fabricated glucose sensors showed a sensitivity of 0.40 µs dL mg−1 with a dynamic phosphorescence lifetime range of 46.6–197.1 µs over 0–150 mg dL−1 glucose, with a glucose LoD of 18.3 mg dL−1 and maximum distinguishable concentration of 111.1 mg dL−1. Similarly, lactate sensors were prepared with NIMs microdomains containing lactate oxidase (LOx) and found to have a detection range of 0–14 mg dL−1 with LoD of 1.8 mg dL−1 and maximum concentration of 13.7 mg dL−1 with lactate sensitivity of 10.7 µs dL mg−1. Owing to its versatility, the proposed NIMs-based design can be extended to a wide range of metabolites and different oxygen-sensing dyes with different excitation wavelengths based on specific application

White light emitting polymers from a luminogen with local polarity induced enhanced emission

Aggregation induced enhanced emission (AIEE) is considered as an important tool to circumvent the aggregation caused quenching (ACQ) effect in organic light emitting diodes (OLEDs). Charge trapping and surplus long wavelength electroluminescence is a cause of concern in single polymer based white OLEDs. However, the potential of luminogens with AIEE property as a credible tool to offset the above problems in white light emitting single polymer is not properly explored. In this study design, synthesis and spectral characterization of a polymerizable luminogen, (2Z,2′Z)-6,6′-(2,7-dibromo-9H-fluorene-9,9-diyl)bis(hexane-6,1-diyl)bis(2-cyano-3-(10-hexyl-10H-phenothiazin-3-yl)acrylate(FCPA) with AIEE property and its copolymers is presented. Lippert-Mataga studies showed that reduced local polarity caused by aliphatic chains in condensed state of FCPA resulted in AIEE property. The copolymers P(FCPA-1) and P(FCPA-0.5) with 1% and 0.5% FCPA moieties showed white electroluminescence and enhanced thin film photoluminescence that matched very closely. The superior performance of OLEDs is attributed to the presence of a phenothiazine group in FCPA that resulted in nearly equal electron and hole injection barriers

White Light Emitting Polymers from a Luminogen with Local Polarity Induced Enhanced Emission

Aggregation induced enhanced emission (AIEE) is considered as an important tool to circumvent the aggregation caused quenching (ACQ) effect in organic light emitting diodes (OLEDs). Charge trapping and surplus long wavelength electroluminescence is a cause of concern in single polymer based white OLEDs. However, the potential of luminogens with AIEE property as a credible tool to offset the above problems in white light emitting single polymer is not properly explored. In this study design, synthesis and spectral characterization of a polymerizable luminogen, (2<i>Z</i>,2′<i>Z</i>)-6,6′-(2,7-dibromo-9<i>H</i>-fluorene-9,9-diyl)­bis­(hexane-6,1-diyl)­bis­(2-cyano-3-(10-hexyl-10<i>H</i>-phenothiazin-3-yl)­acrylate­(FCPA) with AIEE property and its copolymers is presented. Lippert-Mataga studies showed that reduced local polarity caused by aliphatic chains in condensed state of FCPA resulted in AIEE property. The copolymers P­(FCPA-1) and P­(FCPA-0.5) with 1% and 0.5% FCPA moieties showed white electroluminescence and enhanced thin film photoluminescence that matched very closely. The superior performance of OLEDs is attributed to the presence of a phenothiazine group in FCPA that resulted in nearly equal electron and hole injection barriers