263 research outputs found

    Energy balance of a laser ablation plume expanding in a background gas

    Get PDF
    The energy balance of a laser ablation plume in an ambient gas for nanosecond pulses has been investigated on the basis of the model of Predtechensky and Mayorov (PM), which provides a relatively simple and clear description of the essential hydrodynamics. This approach also leads to an insightful description in dimensionless units of how the initial kinetic energy of the plume is dissipated into kinetic and thermal energy of the background gas. Eventually when the plume has stopped, the initial kinetic energy of the plume is converted into thermal energy of the plume and background gas

    Nonstoichiometric transfer during laser ablation of metal alloys

    Get PDF
    Large angular variations in film composition have been found for ablation of a metallic AuCu alloy (Au/Cu ratio ∼1) in vacuum and background gases of Ne and Xe. The AuCu films grown in vacuum at a laser fluence of 5 Jcm−2 exhibit a large loss in the Cu content, with the Au/Cu ratio ∼2.4 at angles close to normal incidence. At this fluence, a distortion of the plume front is observed followed by the appearance of a secondary emission at the substrate, suggesting that resputtering of the film by energetic ions and reflection of ions/atoms at the substrate can lead to a nonstoichiometric transfer in pulsed laser deposition. Further, we have found that depending on the mass of the background gas employed during growth (Ne or Xe), the ratio of elements in the film can vary significantly over a wide range of angles of deposition. In the presence of the light gas Ne, the degree of nonstoichiometric transfer is gradually reduced with increasing background pressure, resulting in a nearly stoichiometric AuCu films at a Ne pressure of 2 mbar. The behavior in the heavy gas Xe is more complex, and both theoretical and experimental data indicate that the loss of Cu in the deposits is caused by the preferential scattering, as well as by backscattering of the light Cu atoms in the plume upon collisions with the background gas

    Femtosecond laser surface structuring of silicon with Gaussian and optical vortex beams

    Get PDF
    We report an experimental analysis of femtosecond laser induced surface structuring of silicon by exploiting both Gaussian and Optical Vortex beams. In particular, we show how different surface patterns, consisting of quasi-periodic ripples and grooves, can be obtained by using different states of polarization offered by optical vortex beams. Both for Gaussian and optical vortex beams, an increase of the number of laser pulses, N, or beam energy, E-0, leads to a progressive predominance of the grooves coverage, with ripples confined in specific regions of the irradiated area at lower fluence. The average period of ripples and grooves shows a different dependence as a function of both E-0 and N, underlying important differences in mechanisms leading to the formation of ripples and grooves. In particular, our experimental characterization allows identifying a preliminary stage of grooves generation with rudimental surface structures, preferentially directed parallel to the laser polarization. This supports the idea that one possible mechanism of grooves formation lies in the progressive aggregation of clusters of nanopartides densely decorating the ripples. Our experimental findings provide important indications on the basic understanding of the processes involved in laser surface structuring with ultrashort pulses that can guide the design of the surface patterns. (C) 2016 Elsevier B.V. All rights reserved

    Direct femtosecond laser ablation of copper with an optical vortex beam

    Get PDF
    Laser surface structuring of copper is induced by laser ablation with a femtosecond optical vortex beam generated via spin-to-orbital conversion of the angular momentum of light by using a q-plate. The variation of the produced surface structures is studied as a function of the number of pulses, N, and laser fluence, F. After the first laser pulse (N = 1), the irradiated surface presents an annular region characterized by a corrugated morphology made by a rather complex network of nanometer-scale ridges, wrinkles, pores, and cavities. Increasing the number of pulses (2 < N < 100), the surface texture progressively evolves towards larger structures, while the central, non-ablated area is gradually decorated by nanoparticles produced during laser ablation. At large number of pulses (200 < N < 1000), a micro-tip with a nanostructured surface forms in the center of the irradiated area, which eventually disappears at still larger number of pulses (N > 1000) and a deep crater is formed. The nanostructure variation with the laser fluence, F, also evidences an interesting dependence, with a coarsening of the structure morphology as F increases. Our experimental findings demonstrate that direct femtosecond laser ablation with optical vortex beams produces interesting patterns not achievable by the more standard beams with a Gaussian intensity profile. They also suggest that appropriate tuning of the experimental conditions (F, N) can allow generating micro- and/or nano-structured surface for any specific application

    Surface Structuring with Polarization-Singular Femtosecond Laser Beams Generated by a q-plate

    Get PDF
    In the last few years femtosecond optical vortex beams with di erent spatial distributions of the state of polarization (e.g. azimuthal, radial, spiral, etc.) have been used to generate complex, regular surface patterns on di erent materials. Here we present an experimental investigation on direct femtosecond laser surface structuring based on a larger class of vector beams generated by means of a q-plate with topological charge q = +1/2. In fact, voltage tuning of q-plate optical retardation allows generating a family of ultrashort laser beams with a continuous spatial evolution of polarization and uence distribution in the focal plane. These beams can be thought of as a controlled coherent superposition of a Gaussian beam with uniform polarization and a vortex beam with a radial or azimuthal state of polarization. The use of this family of ultrashort laser beams in surface structuring leads to a further extension of the achievable surface patterns. The comparison of theoretical predictions of the vector beam characteristics at the focal plane and the generated surface patterns is used to rationalize the dependence of the surface structures on the local state of the laser beam, thus o ering an e ective way to either design unconventional surface structures or diagnose complex ultrashort laser beams

    Vector vortex beams generated by q-plates as a versatile route to direct fs laser surface structuring

    Get PDF
    We report an experimental investigation on direct laser surface structuring with femtosecond vector vortex beams generated by means of q-plates with topological charges q = 1, 3/2, 2, 5/2. Structured light beams with spatially variant state of polarization and intensity are generated and applied to multi-pulse irradiation of a solid crystalline silicon target. The creation of a variety of surface structures, like laser induced periodic surface structures, multi-spot arrays and shaped ablation craters, is demonstrated by direct laser surface structuring with vector vortex beams at different values of q. The features of the surface structures are compared with the vector vortex beam characteristics at the focal plane, evidencing their relationship with the polarization and intensity profile of the laser beams. Our experimental findings show that vector vortex beams produced by q-plates can offer a valuable and versatile route to imprint unconventional surface structures on a solid target through a mask-free ablative process and step scan processing

    Surface structures with unconventional patterns and shapes generated by femtosecond structured light fields

    Get PDF
    We present an investigation on ultrashort laser surface structuring with structured light fields generated by various q-plates. In particular, q-plates with topological charges q = 1, 3/2, 2, 5/2 are used to generate femtosecond (fs) vector vortex beams, and form complex periodic surface structures through multi-pulse ablation of a solid crystalline silicon target. We show how optical retardation tuning of the q-plate offers a feasible way to vary the fluence transverse distribution of the beam, thus allowing the production of structures with peculiar shapes, which depend on the value of q. The features of the generated surface structures are compared with the vector vortex beam characteristics at the focal plane, by rationalizing their relationship with the local state of the laser light. Our experimental findings demonstrate how irradiation with fs complex light beams can offer a valuable route to design unconventional surface structures

    One year of tropospheri clidar measurements of aerosol extinction and backscatter

    Get PDF
    The aerosol lidar system operational at IMAA-CNR in Tito Scalo (PZ) (Southern Italy, 40°36'N, 15°44'E, 820 m above sea level) is part of the EARLINET project. Systematic lidar measurements of aerosol backscatter and extinction in the troposphere have been performed since May 2000. Aerosol backscatter measurements were performed at both 355 nm and 532 nm, while aerosol extinction coeffi cient were retrieved from simultaneous N2 Raman backscatter signals at 386.6 nm. The observations were performed on a regular schedule of two night time measurements per week (around sunset) and one daytime measurement per week (around 13:00 UTC). Furthermore, special observations concerning Saharan dust outbreaks have been carried out. Starting in May 2000 the lidar measurements performed in Tito Scalo have been collected and analysed. Preliminary results regarding the fi rst year of measurements are reported. In particular, the evolution of the aerosol integrated backscatter and extinction as well as of the mean value of the lidar ratio in the whole aerosol layer is reported. Results show clear evidence of seasonal variation of the observed parameters, with higher values and greater variability during summertime

    Secondary electron yield reduction by femtosecond pulse laser-induced periodic surface structuring

    Get PDF
    The electron-cloud phenomenon is one cause of beam instabilities in high intensity positive particle accelerators. Among the proposed techniques to mitigate or control this detrimental effect, micro-/nano-geometrical modifications of vacuum chamber surfaces are promising to reduce the number of emitted secondary electrons. Femtosecond laser surface structuring readily allows the fabrication of Laser Induced Periodic Surface Structures (LIPSS) and is utilized in several fields, but has not yet been tested for secondary electron emission reduction. In this study, such treatment is carried out on copper samples using linearly and circularly polarized femtosecond laser pulses. The influence of the formed surface textures on the secondary electron yield (SEY) is studied. We investigate the morphological properties as well as the chemical composition by means of SEM, AFM, Raman and XPS analyses. Surface modification with linearly polarized light is more effective than using circularly polarized light, leading to a significant SEY reduction. Even though the SEY maximum is only reduced to a value of ~1.7 compared to standard laser-induced surface roughening approaches, the femtosecond-LIPSS process enables to limit material ablation as well as the production of undesired dust, and drastically reduces the number of redeposited nanoparticles at the surface, which are detrimental for applications in particle accelerators. Moreover, conditioning tests reveal that LIPSS processed Cu can reach SEY values below unity at electron irradiation doses above 10−3 C/mm2
    • …
    corecore