Myocardial stiffness assessed by shear wave elastography relates to pressure-volume loop derived measurements of chamber stiffness

Funding Acknowledgements Type of funding sources: Public grant(s) – National budget only. Main funding source(s): Research Foundations Flanders Background Increased myocardial stiffness is an important cause of diastolic dysfunction. Currently, invasive pressure-volume loop analysis is the gold standard method for the assessment of the left ventricular (LV) chamber stiffness. Its non-invasive assessment in the clinic is cumbersome, requires the combination of several parameters and has limited reliability. Shear wave elastography (SWE) is a novel method that evaluates the propagation of shear waves travelling along the myocardium using high frame rate echocardiography. The propagation speed is directly related to myocardial stiffness. Shear waves can be induced naturally by mitral valve closure (MVC). So far, the in vivo validation of SWE against an invasive gold standard reference method is still lacking. Purpose To compare myocardial stiffness assessed by shear wave propagation speed after MVC to invasive pressure-volume loop derived measurements of chamber stiffness. Methods Fifteen pigs (31.2 ± 4.1 kg) were included in the study. The instantaneous stiffness of the myocardium was altered by performing the following interventions: 1) preload reduction, 2) afterload increase, 3) preload increase and 4) induction of ischemia/reperfusion (I/R) injury by balloon occlusion of the proximal LAD for 90 min. with subsequent reperfusion of 40 min. To obtain the end-diastolic pressure-volume loop relation (EDPVR), a set of pressure-volume loops was acquired under preload reduction. From the EDPVR, the chamber stiffness constant β and operating chamber stiffness dP/dV were derived. SWE datasets in a parasternal long-axis view were acquired with an experimental ultrasound scanner at an average frame rate of 1304 ± 115 Hz. Shear waves after MVC were visualized on tissue acceleration maps by drawing an M-mode line along the interventricular septum (Figure 1A). The propagation speed was calculated by semi-automatically measuring the spatiotemporal slope. Results The chamber stiffness constant β significantly increased after the induction of the I/R injury (0.05 ± 0.01 1/ml vs. 0.09 ± 0.03 1/ml; p < 0.001). The operating chamber stiffness dP/dV decreased by reducing preload and increased by increasing afterload, increasing preload or by inducing an I/R injury (0.50 ± 0.18 mmHg/ml vs. 0.09 ± 0.05 mmHg/ml, 0.67 ± 0.19 mmHg/ml, 0.78 ± 0.35 mmHg/ml and 1.09 ± 0.38 mmHg/ml, respectively; p < 0.01). Likewise, shear wave propagation speed after MVC increased by increasing pre- and afterload (p = 0.001) and by inducing I/R injury (p < 0.001) (Figure 1B). Preload reduction had no significant influence (p = 0.118). Shear wave speed had a strong positive correlation with β (r = 0.63; p < 0.001) (Figure 1C) and dP/dV (r = 0.81; p < 0.001) (Figure 1D). Conclusions Shear wave speed after MVC is strongly related to invasive pressure-volume loop derived measures of chamber stiffness. The results of this study indicate the potential of SWE as a novel non-invasive method for the assessment of the instantaneous stiffness of the myocardium

Myocardial stiffness assessed by natural shear wave elastography is related to pressure-volume loop derived parameters

C

Natural shear wave propagation speed is influenced by both changes in myocardial structural properties as well as loading conditions

Funding Acknowledgements Type of funding sources: Public grant(s) – National budget only. Main funding source(s): Research Foundation - Flanders (FWO) Background Shear wave elastography (SWE) is a promising tool for the non-invasive assessment of myocardial stiffness. It is based on the evaluation of the propagation speed of shear waves by high frame rate echocardiography. These waves can be induced by for instance mitral valve closure (MVC) and the speed at which they travel is related to the instantaneous stiffness of the myocardium. Myocardial stiffness is defined by the local slope of the stress-strain relation and can therefore be altered by both changes in structural properties of the myocardium as well as loading conditions. Purpose The aim of this study was to investigate how changes in myocardial structural properties as well as loading conditions affect shear wave speed after MVC. Methods Until now, 8 pigs (weight: 33.6 ± 5.4 kg) were included. The following interventions were performed: 1) preload was reduced by balloon occlusion of the vena cava inferior, 2) afterload was increased by balloon occlusion of descending aorta, 3) preload was increased by intravenous administration of 500 ml of saline and 4) ischemia/reperfusion injury (I/R injury) was induced in the septal wall by balloon occlusion of the LAD for 90 min. with subsequent reperfusion for 40 min. Echocardiographic and left ventricular pressure recordings were simultaneously obtained during each intervention. Left ventricular parasternal long-axis views were acquired with an experimental high frame rate ultrasound scanner (average frame rate: 1279 ± 148 Hz). Shear waves were visualized on tissue acceleration maps by drawing an M-mode line along the interventricular septum. Shear wave propagation speed after MVC was calculated by assessing the slope of the wave pattern on the tissue acceleration map (Figure A). Results The change in left ventricular end-diastolic pressure (LVEDP) and shear wave speed after MVC between baseline and each intervention are shown in Figure B and C, respectively. Preload reduction resulted in significant lower LVEDP compared to baseline (p < 0.01), while the other loading changes did not have a significant effect. Shear wave speed after MVC significantly increased by afterload and preload increase (p < 0.01). I/R injury resulted in increased shear wave speed (p < 0.01) without significantly altering LVEDP. There was a good positive correlation between the change in LVEDP and the change in shear wave speed induced by loading changes (r = 0.76; p < 0.001) (Figure D). However, the correlation became less strong if data of I/R injury was taken into account as well (r = 0.63; p < 0.001). Conclusion Our results suggest that SWE is capable to characterize myocardial tissue properties and besides has the potential as a novel method for the estimation of left ventricular filling pressures. However, in the presence of structural changes of the myocardium, care should be taken when estimating filling pressures based on shear wave propagation speed

Asphalt binders modified by SBS and SBS/nanoclays: effect on rheological properties

In this work, it was investigated the effect of organically modified vermiculite and montmorillonite (OVMT and OMMT, respectively) in asphalt binders (AB) modified by SBS (styrene-butadiene-styrene). The physical and rheological properties were performed for AB, 4.0% SBS MB and nanocomposite AB modified by 2.5% SBS with 2.5% of organoclays. The modified binders (MB) result in the enhancement of complex modulus (G*) and reduction of phase angle (d), which means greater resistance to permanent deformation. The viscosity, penetration and thermal susceptibility were appropriate. The black diagrams show that the effect of nanoclays OVMT and OMMT was similar to the effect of Cloisite®. The rheological properties of the nanocomposite were comparable to the 4.0% SBS MB, identifying a cost reduction due to the potential of replacing polymer with clay. The presence of OVMT improved the storage stability of SBS MB, an important result, as the phase separation is a major obstacle to the use of SBS in paving