191 research outputs found
Effect of Corrugation Angle and Direction on the Performance of Corrugated Steel Plate Shear Walls
Corrugated steel plate shear wall (CSPSW) is one of the lateral resistance systems which consists mainly of steel frame (beam and column) with vertical or horizontal corrugated steel plate connected to the frame by weld, bolts or both. This type of steel shear wall characterized by low cost and short construction time with high strength, ductility, initial stiffness and excellent ability to dissipate energy. The aim of this paper is to evaluate the effect of corrugation angle and its direction on the performance of CSPSW under cyclic loading. The Finite element analysis was employed to achieve the research aim. The FE models were validated with experimental data available in the literature. Results reveal that the corrugation angle has a clear influence on initial stiffness, strength, ductility, and energy dissipation of CSPSW. The optimum performance of CSPSW can be obtained with angles of 30o for CSPSW with vertical corrugation and 20o for CSPSW with horizontal corrugation. The use of CSPSW with vertical corrugation provides higher strength, stiffness, and ductility compared to CSPSW with horizontal corrugation. Therefore, it is recommended to use CSPSW with vertical corrugation
Neotectonics of Zindapir Anticline and Sulaiman Fold and Thrust Belt: Inferences from SRTM DEM
The current study deals with the significance of surface dynamics (SDs) and its relationship to tectonics and active erosion in Zindapir Anticline (ZPA) and neighboring Sulaiman Fold and Thrust Belt (SFTB) which is a direct result of transform plate movement between Indo-Pak continent and Eurasia. The Shuttle Radar Topographic Mission Digital Elevation Model SRTM DEM with 30 m resolution was employed to compute SDs; Isobase (IBL), drainage density (DD), relative relief (RR) and vertical dissection (VD) thematic maps for the study area. The results obtained show that the DD, RR, VD and IBL have higher values in north west, central segments and south west of the SFTB, whereas the Zindapir anticline represents dextral movement on its east side while sinistral sense of movement is observed on its western edge. High values of RR and VD correspond to highly incised topography with great surface roughness. The enhanced values of IBL and DD in the northwest, south west and central SFTB correspond to uplifted active topography segments and can trigger medium level earthquakes in this region. The conjugate movement of ZPA is an indication of its neotectonic nature and recent uplift is causing surface deformation which needs to be understood in the context of SFTB development as a result of India-Eurasia transform movemen
Collaborative Public Participatory Web Geographic Information System: A Groupware-Based Online Synchronous Collaboration to Support Municipal Planning
Co-PPGIS has a wide variety of applications like municipal planning, emergency response, public health and security, etc. The main focus of this paper is on the development and design of a web collaborative PPGIS (Co-PPGIS) infrastructure. As part of municipality’s planning and management services, Co-PPGIS is developed for real-time map sharing application system. Co-PPGIS is an effective and essential online meeting system for supporting group collaborations on geographic information such as maps and imageries and capturing and sharing of local/domain knowledge in real time. Co-PPGIS permits amalgamation of geospatial data and collaborator’s input in the form of geo-referenced notations. It incorporates coherent components such as map sharing, real-time chat, video conferencing, and geo-referenced textual and graphical notations. The study aims to focus on public participation and geo-collaboration facilitated with information sharing, interactive geo-conferencing, real-time map, and data sharing with tools to draw features or add annotation to the map while discussions, uploading documents, and live communication. Co-PPGIS provides an efficient and reliable platform that will significantly reduce the time to acquire, process, and analyze data. The significance of this study is to contribute to existing public participation practices, to municipal planning, to decision-making, or to geographic information science
Evaluation of Fractal Dimension and Topographic Surface Roughness (Vertical Dissection) in Astore-Deosai-Skardu Region in GIS Environment Using ASTER GDEM
Fractal investigation is a valuable technique to model and quantify the composite patterns of natural similarobjects. This study investigates Neotectonics using ASTER-GDEM. Fractal technique for extraction of topographicfractal dimension (Dtopo) and vertical dissection (Rtopo-surf) were used to assess the Neotectonics deformation.Geomorphological regions can be demarcated by using above mentioned procedures as they reveal the topographicevolutionary stages as an evaluation of topographic textures. The idea is to recognize the zones that are stronglyinfluenced by Neotectonics. Astore-Deosai-Skardu (ADS) region in Gilgit-Baltistan was selected for this purpose as itlies between MKT and MMT which is experiencing surface topographic deformation (STD) caused by anti-clock-wiseprogression and subduction of Indian plate beneath Eurasia. The results obtained illustrates that Dtopo and Rtopo-surf showanomalies in the ADS region that clearly represent a robust control of nearby MMT, MKT and KkF and highlights theirsignificance to describe regions vulnerable to Neotectonics and related deadly events threatening precious human livesand infrastructure damages
Fractal Antennas for Wireless Communications
When the length of the antenna is less than a quarter of the wavelength of the operating frequency, good radiation properties are difficult to obtain. However, size limitations can be overcome in this case using a fractal geometry antenna. The shape is repeated in a limited size such that the total length of the antenna is increased to match, for example, half of the wavelength of the corresponding desired frequency. Many fractal geometries, e.g., the tree, Koch, Minkowski, and Hilbert fractals, are available. This chapter describes the details of designing, simulations, and experimental measurements of fractal antennas. Based on dimensional geometry in terms of desired frequency bands, the characteristics of each iteration are studied carefully to improve the process of designing the antennas. In depth, the surface current distribution is investigated and analyzed to enhance the circular polarization radiation and axial ratio bandwidth (ARBW). Both, simulation and experimental, results are discussed and compared. Two types of fractal antennas are proposed. The first proposed fractal antenna has a new structure configured via a five-stage process. The second proposed fractal antenna has a low profile, wherein the configuration of the antenna was based on three iterations
Prevalence of Anxiety and Depression Symptoms among Post Bariatric Surgery Patients in Baghdad-Iraq
J. Fac. Med. Baghdad
2023. Vol 65, No. 4
Â
Background: Obesity is a major public health concern and is on the rise worldwide. Numerous studies revealed that the best method for treating morbid obesity is bariatric surgery, which has indicated its effectiveness in controlling weight. Published studies reported that patients who had undergone bariatric surgery may have psychiatric illnesses when compared to other obese individuals with similar preoperative characteristics.
Objectives:Â Estimate the rates of anxiety and depression among post-operative bariatric surgery patients.
Methods: A cross-sectional study on 61 patients was conducted at the bariatric clinic in the Gastroenterology and Hepatology Baghdad teaching hospital and the Private Nursing Home Hospital in Medical city, Baghdad-Iraq from 1st of April to the 30th of December 2021. Generalized Anxiety Assessment – 7 (GAD-7) Scale, and Patient Health Questionnaire – 9 (PHQ-9) scale were applied to assess these conditions.
Results: The prevalence of depression among the studied patients was 32.8%, while the prevalence of anxiety was 44.3%. Marital status, diabetes mellitus, post-operative BMI, and past psychiatric history were significantly associated with depression, P value < 0.05. Chronic diseases (diabetes mellitus and hypertension), post-operative BMI,nd psychiatric history were significantly associated with anxiety, P value<0.05.
Conclusions: Anxiety was found to be more common than depression among patients who underwent bariatric surgery. Variables predicting both depression and anxiety were diabetes mellitus, post-operative severe obesity, and a history of psychiatric disorders before surgery.
Received May. 2023
Accepted July 2023
Published Jan. 2023
Architectural Design and Prototyping of Co-PPGIS: A Groupware-Based Online Synchronous Collaborative PPGIS to Support Municipality Development and Planning Management Workflows
Co-PPGIS has a wide variety of applications like municipal planning, emergency response, public health and security, etc. The main focus of this chapter is on the development and design of a Web Collaborative PPGIS (Co-PPGIS) infrastructure. As part of municipality’s planning and management services, Co-PPGIS is developed for real-time map sharing application system. Co-PPGIS is an effective and essential online meeting system for supporting group collaborations on geographic information such as maps and imageries, and capturing and sharing of local/domain knowledge in real time. Co-PPGIS permits amalgamation of geospatial data and collaborator’s input in the form of geo-referenced notations. It incorporates coherent components as map sharing, real-time chat, video conferencing, geo-referenced textual and graphical notations. The study aims to focus on public participation and geo-collaboration facilitated with information sharing, interactive geo-conferencing, real-time map, and data sharing with tools to draw features or add annotation to the map while discussions, uploading documents, and live communication. Co-PPGIS provides an efficient and reliable platform that will significantly reduce the time to acquire, process, and analyze data. The significance of this study is to contribute to existing public participation practices, to municipal planning, to decision-making, or to geographic information science
Laterally constrained inversion of surface wave data at Najaf city (Iraq)
A case history is reported to outline a possible strategy for the construction of a pseudo-2D model of
shear-wave velocity for seismic site response studies. Experimental data have been collected using the
Multichannel Analysis of Surface Wave technique (MASW) at six sites in the city of Najaf (Southern
Iraq). The sites are aligned along the route of a proposed subway. The dataset has been processed to
extract the dispersion curves of each site and then it has been inverted by using a Laterally Constrained
Inversion (LCI) algorithm. The initial model for the local search algorithm has been obtained with
a preliminary Monte Carlo Inversion (MCI). A priori information from borehole logs and lateral
constraints between neighbors 1D models are used to mitigate the non-uniqueness of the solution.
The result is a pseudo-2D shear-wave velocity model of the area which is in good agreement with
sediment lithology and thicknesses obtained from borehole logs
Recommended from our members
An empirical demonstration of the effect of study design on density estimations
Funding was provided by the Snow Leopard Trust and Global Environmental Facility through Pakistan Snow Leopard and Ecosystem Protection Program (PSLEP). The publication of this article was funded by Qatar National Library.The simultaneous development of technology (e.g. camera traps) and statistical methods, particularly spatially capture-recapture (SCR), has improved monitoring of large mammals in recent years. SCR estimates are known to be sensitive to sampling design, yet existing recommendations about trap spacing and coverage are often not achieved, particularly for sampling wide-ranging and rare species in landscapes that allow for limited accessibility. Consequently, most camera trap studies on large wide-ranging carnivores relies on convenience or judgmental sampling, and often yields compromised results. This study attempts to highlight the importance of carefully considered sampling design for large carnivores that, because of low densities and elusive behavior, are challenging to monitor. As a motivating example, we use two years of snow leopard camera trapping data from the same areas in the high mountains of Pakistan but with vastly different camera configurations, to demonstrate that estimates of density and space use are indeed sensitive to the trapping array. A compact design, one in which cameras were placed much closer together than generally recommended and therefore have lower spatial coverage, resulted in fewer individuals observed, but more recaptures, and estimates of density and space use were inconsistent with expectations for the region. In contrast, a diffuse design, one with larger spacing and spatial coverage and more consistent with general recommendations, detected more individuals, had fewer recaptures, but generated estimates of density and space use that were in line with expectations. Researchers often opt for compact camera configurations while monitoring wide-ranging and rare species, in an attempt to maximize the encounter probabilities. We empirically demonstrate the potential for biases when sampling a small area approximately the size of a single home range-this arises from exposing fewer individuals than deemed sufficient for estimation. The smaller trapping array may also underestimate density by significantly inflating [Formula: see text]. On the other hand, larger trapping array with fewer detectors and poor design induces uncertainties in the estimates. We conclude that existing design recommendations have limited utility on practical grounds for devising feasible sampling designs for large ranging species, and more research on SCR designs is required that allows for integrating biological and habitat traits of large carnivores in sampling framework. We also suggest that caution should be exercised when there is a reliance on convenience sampling.Publisher PDFPeer reviewe
- …