ELECTROCHEMICAL AND CHEMOMETRIC DETERMINATION OF DORZOLAMIDE AND TIMOLOL IN EYE DROPS USING MODIFIED MULTIWALL CARBON NANOTUBE ELECTRODE

Objective: This work is focused on the construction of simple and sensitive electrochemical sensor for quantitative determination of dorzolamide (DOR) and timolol maleate (TIM). This method is based on the incorporation of multiwall carbon nanotubes (MWCNT) into the carbon paste electrode which improve the characteristics of the electrode.Methods: The electrochemical response of modified electrode was based on voltammetric oxidation, using cyclic voltammetry (CV) and impedance spectroscopy (EIS). The structural morphology of the surface modified electrode was characterized by scanning electron microscope (SEM). Quantitative analysis for each of the two compounds in a mixture has been examined by using of chemometric tools for resolving overlapping signals. The prediction performance of the chemometric method was analyzed by principal component regression (PCR) and partial least square (PLS).Results: Fractional factorial design was constructed from set of synthetic mixtures of two drugs in concentration ranges of 0.05 to 1.6µg/ml for DOR and 1.5-20 µg/ml for TIM. Under optimum experimental conditions, DOR and TIM gave rectilinear response over the concentration range of 0.072-1.88 µg/ml and 1.16-20.84 µg/ml, respectively. The limit of detection (LOD) was found to be 0.098 and 1.025 µg/ml, for DOR and TIM, respectively. It found that the % of relative prediction error (RPE) was acceptable and satisfactory.Conclusion: In these work, for the first time, a new voltammetric simultaneous method developed for a rapid and efficient determination of DOR and TIM from eye dropper sample at nano modified electrode with satisfactory results. These results indicate that MWCNT holds great promise in practical application

The influence of green modification of lignin on the electrochemical properties of biocomposites for industrial applications

It’s a report on a novel approach; preparation and electrochemical properties of modified lignin. Wax and starch were used as natural, green adhesives for enhancing the electrical resistivity of lignin in acidic medium, forming eco-friendly high insulator biocomposite. Scanning electron microscopy (SEM) was used to characterize the fabricated biocomposite. The modified lignin was characterized using Fourier transform infrared (FTIR), while the electrochemical behavior was examined by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The innovative approach described in this work provides a promising eco- friendly method for lignin modification with highly electrical resistivity and stability with time.Â

An Innovative Simple Electrochemical Levofloxacin Sensor Assembled from Carbon Paste Enhanced with Nano-Sized Fumed Silica

A new electrochemical sensor for the detection of levofloxacin (LV) was efficiently realized. The aim was to develop a new, cheap, and simple sensor for the detection of LV, which is used in various infections due to its pharmacological importance. It consists of carbon paste (CP) enhanced with nano-sized fumed silica (NFS). NFS has a very low bulk density and a large surface area. The carbon paste-enhanced NFS electrode (NFS/CPE) showed great electrocatalytic activity in the oxidation of 1.0 mM LV in Britton–Robinson buffer (BR) at pH values ranging from 3.0 to 8.0. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used; the peak current value (Ip) of the NFS/CPE sensor was 2.7 times that of the bare electrode, ensuring its high electrocatalytic activity. Electrochemical impedance spectroscopy (EIS) was performed at a peak potential (Ep) of +1066 mV, yielding a resistance of 10 kΩ for the designed NFS/CPE sensor compared to 2461 kΩ for the bare electrode, indicating the high conductivity of the modified sensor and verifying the data observed using the CV technique. Surface descriptions were determined by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). The variation in the concentration of LV (2.0 to 1000 µM) was considered in BR buffer (pH = 5.0) at a scan rate (SR) of 10 mV/s by the NFS/CPE. The detection and quantification limits were 0.09 µM and 0.30 µM, respectively. To evaluate the application of LV in real samples, this procedure was established on Quinostarmax 500 mg tablets and human plasma samples. Reasonable results were obtained for the detection of LV

New Au/chitosan nanocomposite modified carbon paste sensor for voltammetric detection of nicotine

Abstract A profoundly touchy voltammetric sensor for detection of nicotine (NIC) in urine and tobacco specimens has been developed in light of the boosted electrochemical response of NIC at gold and chitosan nanocomposite modified carbon paste electrode (ACMCPE). Material characterization techniques Scanning Electron Microscope and Energy Dispersive X-ray (SEM & EDX) were utilized to describe the ACMCPE surface material. The impedance spectroscopy technique (EIS), cyclic voltammetry (CV), chronoamperometry (CA), and differential pulse voltammetry (DPV) were employed to explore the electrochemical sensing of NIC at ACMCPE. The created sensor exhibits an exceptional electrochemical sensitivity to NIC in a universal Britton–Robinson (B-R) buffer solution with a pH range of 2.0 to 8.0. The sensor shows a linear response over NIC concentration ranges of 4.0–320.0 µM, with the detection limit (LOD) of 7.6 µM. The prepared sensor has been shown to be exceptionally viable in detecting NIC with amazing selectivity and reproducibility. We suggest it as a trustworthy and useful electrochemical sensor for NIC location

EFFECT OF SPLIT PACKING METHOD ON RETENTION OF MAXILLARY COMPLETE DENTURE (IN VIVO AND IN VITRO STUDY)

The dimensional change of maxillary complete dentures remains a problem that may affect retention. The problem is multi-factorial and cannot be totally eliminated. Several methods were proposed to control these changes in order to keep them as minimum as possible. In the present study, a complete split packing method was investigated. The aim was to evaluate the retention of the obtained dentures clinically. 10 edentulous patients were selected; each received 2 heat cured acrylic maxillary dentures that were identical in every aspect except packing method. One maxillary denture was conventionally cured and the other was cured as two split halves that were reassembled by self cure resin. The dentures were examined for retention using a digital force gauge. The results favored the split method, so the second phase of the study was conducted. The aim of the second phase was to evaluate the accuracy of fit at the posterior palatal seal area in vitro using travelling microscope. 10 identical maxillary casts were obtained from a rubber mould. The casts were randomly divided into two groups. Identical maxillary dentures were constructed over these casts. The dentures constructed for the first group casts were split packed, while those for the second group were conventionally packed. The discrepancies at the posterior palatal seal area revealed for group I were significantly less than group II. The clinical and in vitro results suggests that the split packing method of acrylic dentures produces better maxillary denture in terms of posterior palatal seal discrepancies and clinical retention

A Novel Nano-Composite CSNPs/PVP/CoONPs Coating for Improving Corrosion Resistance of Ti-6Al-4V Alloy as a Dental Implant

A new nano-coating of chitosan nanoparticles/polyvinylpyrrolidone/cobalt oxide nanoparticles (CSNPs/PVP/CoONPs) was performed in this work. The newly designed nano-coating comprises a copolymer and inorganic matrices. This nano-coating was used to cover the Ti-6Al-4V alloy surface as a newly designed dental alloy, and then its corrosion properties were studied through different electrochemical techniques. The results reveal that this novel coating improved the corrosion resistance of the Ti-6Al-4V alloy in artificial saliva solution by reaching 17.7 MΩ cm2. The new fabricated biocompatible coating (CSNPs/PVP/CoONPs) greatly enhanced the electrochemical corrosion resistance by giving a high protection efficiency of 90.87% and a low hydrogen evolution rate in artificial saliva solution at 37 °C. The observed results were confirmed by scanning electron microscopy (SEM), Vickers microhardness testing, coating thickness tests, high-resolution transmission electron microscopy (HRTEM), and energy-dispersive X-ray analysis (EDX)