654 research outputs found
Technology Needs Assessment of an Atmospheric Observation System for Multidisciplinary Air Quality/Meteorology Missions, Part 2
The technology advancements that will be necessary to implement the atmospheric observation systems are considered. Upper and lower atmospheric air quality and meteorological parameters necessary to support the air quality investigations were included. The technology needs were found predominantly in areas related to sensors and measurements of air quality and meteorological measurements
Assessment of the use of space technology in the monitoring of oil spills and ocean pollution: Technical volume. Executive summary
The potential of space systems and technology for detecting and monitoring ocean oil spills and waste pollution was assessed as well as the impact of this application on communication and data handling systems. Agencies charged with responsibilities in this area were identified and their measurement requirements were ascertained in order to determine the spatial resolution needed to characterize operational and accidental discharges. Microwave and optical sensors and sensing techniques were evaluated as candidate system elements. Capabilities are described for the following: synthetic aperture radar, microwave scatterometer, passive microwave radiometer, microwave altimeter, electro-optical sensors currently used in airborne detection, existing space-based optical sensors, the thematic mapper, and the pointable optical linear array
Surface electronic structure of the Fe3O4(100): Evidence of a half-metal to metal transition
In situ prepared Fe3O4(100) thin films were studied by means of scanning tunneling microscopy (STM) and spin-polarized photoelectron spectroscopy (SP-PES). The atomically resolved (2×2)R45°wavelike surface atomic structure observed by STM is explained based on density functional theory (DFT) and ab initio atomistic thermodynamics calculations as a laterally distorted surface layer containing octahedral iron and oxygen, referred to as a modified B layer. The work-function value of the Fe3O4(100) surface extracted from the cutoff of the photoelectron spectra is in good agreement with that predicted from DFT. On the Fe3O4(100) surface both the SP-PES measurements and the DFT results show a strong reduction of the spin polarization at the Fermi level (EF) compared to the bulk density of states. The nature of the states in the majority band gap of the Fe3O4 surface layer is analyzed
Heterologous reporter expression in the planarian Schmidtea mediterranea through somatic mRNA transfection
Planarians have long been studied for their regenerative abilities. Moving forward, tools for ectopic expression of non-native proteins will be of substantial value. Using a luminescent reporter to overcome the strong autofluorescence of planarian tissues, we demonstrate heterologous protein expression in planarian cells and live animals. Our approach is based on the introduction of mRNA through several nanotechnological and chemical transfection methods. We improve reporter expression by altering untranslated region (UTR) sequences and codon bias, facilitating the measurement of expression kinetics in both isolated cells and whole planarians using luminescence imaging. We also examine protein expression as a function of variations in the UTRs of delivered mRNA, demonstrating a framework to investigate gene regulation at the post-transcriptional level. Together, these advances expand the toolbox for the mechanistic analysis of planarian biology and establish a foundation for the development and expansion of transgenic techniques in this unique model system
Light emission from a scanning tunneling microscope: Fully retarded calculation
The light emission rate from a scanning tunneling microscope (STM) scanning a
noble metal surface is calculated taking retardation effects into account. As
in our previous, non-retarded theory [Johansson, Monreal, and Apell, Phys. Rev.
B 42, 9210 (1990)], the STM tip is modeled by a sphere, and the dielectric
properties of tip and sample are described by experimentally measured
dielectric functions. The calculations are based on exact diffraction theory
through the vector equivalent of the Kirchoff integral. The present results are
qualitatively similar to those of the non-retarded calculations. The light
emission spectra have pronounced resonance peaks due to the formation of a
tip-induced plasmon mode localized to the cavity between the tip and the
sample. At a quantitative level, the effects of retardation are rather small as
long as the sample material is Au or Cu, and the tip consists of W or Ir.
However, for Ag samples, in which the resistive losses are smaller, the
inclusion of retardation effects in the calculation leads to larger changes:
the resonance energy decreases by 0.2-0.3 eV, and the resonance broadens. These
changes improve the agreement with experiment. For a Ag sample and an Ir tip,
the quantum efficiency is 10 emitted photons in the visible
frequency range per tunneling electron. A study of the energy dissipation into
the tip and sample shows that in total about 1 % of the electrons undergo
inelastic processes while tunneling.Comment: 16 pages, 10 figures (1 ps, 9 tex, automatically included); To appear
in Phys. Rev. B (15 October 1998
Prospects of micromass culture technology in tissue engineering
Tissue engineering of bone and cartilage tissue for subsequent implantation is of growing interest in cranio- and maxillofacial surgery. Commonly it is performed by using cells coaxed with scaffolds. Recently, there is a controversy concerning the use of artificial scaffolds compared to the use of a natural matrix. Therefore, new approaches called micromass technology have been invented to overcome these problems by avoiding the need for scaffolds. Technically, cells are dissociated and the dispersed cells are then reaggregated into cellular spheres. The micromass technology approach enables investigators to follow tissue formation from single cell sources to organised spheres in a controlled environment. Thus, the inherent fundamentals of tissue engineering are better revealed. Additionally, as the newly formed tissue is devoid of an artificial material, it resembles more closely the in vivo situation. The purpose of this review is to provide an insight into the fundamentals and the technique of micromass cell culture used to study bone tissue engineering
Excited States of Ladder-type Poly-p-phenylene Oligomers
Ground state properties and excited states of ladder-type paraphenylene
oligomers are calculated applying semiempirical methods for up to eleven
phenylene rings. The results are in qualitative agreement with experimental
data. A new scheme to interpret the excited states is developed which reveals
the excitonic nature of the excited states. The electron-hole pair of the
S1-state has a mean distance of approximately 4 Angstroem.Comment: 24 pages, 21 figure
Transport properties of copper phthalocyanine based organic electronic devices
Ambipolar charge carrier transport in Copper phthalocyanine (CuPc) is studied
experimentally in field-effect transistors and metal-insulator-semiconductor
diodes at various temperatures. The electronic structure and the transport
properties of CuPc attached to leads are calculated using density functional
theory and scattering theory at the non-equilibrium Green's function level. We
discuss, in particular, the electronic structure of CuPc molecules attached to
gold chains in different geometries to mimic the different experimental setups.
The combined experimental and theoretical analysis explains the dependence of
the mobilityand the transmission coefficient on the charge carrier type
(electrons or holes) and on the contact geometry. We demonstrate the
correspondence between our experimental results on thick films and our
theoretical studies of single molecule contacts. Preliminary results for
fluorinated CuPc are discussed.Comment: 18 pages, 16 figures; to be published in Eur. Phys. J. Special Topic
Noncollinear magnetic ordering in small Chromium Clusters
We investigate noncollinear effects in antiferromagnetically coupled clusters
using the general, rotationally invariant form of local spin-density theory.
The coupling to the electronic degrees of freedom is treated with relativistic
non-local pseudopotentials and the ionic structure is optimized by Monte-Carlo
techniques. We find that small chromium clusters (N \le 13) strongly favor
noncollinear configurations of their local magnetic moments due to frustration.
This effect is associated with a significantly lower total magnetization of the
noncollinear ground states, ameliorating the disagreement between Stern-Gerlach
measurements and previous collinear calculations for Cr_{12} and Cr_{13}. Our
results further suggest that the trend to noncollinear configurations might be
a feature common to most antiferromagnetic clusters.Comment: 9 pages, RevTeX plus .eps/.ps figure
- …