140 research outputs found
Chromaticity study of Curcumin Dye Extracted from Curcuma longa L. using for UV light down conversion for white light emitting diode
Turmeric phosphor dye extracted from Curcuma Longa L. through simple technique using silica gel. The phosphor was used light down-conversion of UV light for white light emitting diode (WLED).Two types of UV (380nm and 395nm )wavelengths have been used.The characteristics of the white light chromaticity was controlled by changing the current and the concentration of the phosphor.The concentration has a critical effect on the conversion
efficiency. The CIE coordinates and correlated colortemperature were measured for various phosphorweight and current. An optimum color renderingindex (CRI) value of 78.5 is obtained .The white phosphor has a (CIE) value of (0 .336,0.355) and the color temperature (CCT)5350K
The Effect of the Wavelength of the LED used to Pump Phosphor Produced from Curcuminoids Dye Extracted from Turmeric (Curcuma longa L.) to Produce White Light
Previous studies have investigated the use of curcuminoids dye extracted from turmeric
(Curcuma longa L.) for light down-conversion of UV light (390 nm) for application as white light emitting diode (WLED) as well as the three methods used to extract curcuminoids dye (the normal method, use of Soxhlet apparatus and by combining the normal method with the Soxhlet extraction). This paper goes a step further to analyze the effect of the wavelengths of LED sources (365, 390 and 445nm) used to pump phosphor in the conversion of white light. The chromaticity coordinates (CIE), color rendering index (CRI) and color temperature (CCT) were measured for different applied currents (20, 60 and 100mA) and weights of curcuminoids (5, 10, 15, 20, 25, 30, 35, 40, 45, 50 and 55mg). With optimum CRI, CIE and CCT values of 73.9, 0.3304;0.3501, and 5579K, respectively, the samples pumped with LED source of 365 nm wavelength produced better white light compared
to 390 and 445 nm, in terms of the amount of phosphor used. Thus, the wavelength of the LED source used to pump phosphor is inversely related to the amount of yellow light produced into the blue light when the concentration of phosphor is constant. The stress test showed that the degradation time of the dye could be improved by reducing the wavelength used to pump the sample or selecting
a weak thermal conductivity material
Hydrothermal Synthesis and Structural Properties of V205 Nanoflowers at Low Temperatures
Vanadium pentoxide nanoflowers were synthesized through a simple hydrothermal method at low temperatures. The structure was fabricated using NH4V03 and oxalic acid as precursors with 0.1 M concentration. The morphology and structure of the nanoflowers were characterized by FESEM, XRD, Raman, and UV-Visible spectroscopy. The results reveal an orthorhombic structure with preferred orientation along (001) plane of the prepared V205 nanoflowers. Characteristic Raman peaks also expressed the same structural features. Microstructure analysis by FESEM showed the nanoflower structure of V205 with diameters in the range of 60-80 nm and length in 600-800 nm. A red-shift is observed in the characteristic absorption peak of V205, with the annealing, which attributed to the decrease of the bandgap of the samples
Hydrothermal Synthesis and Structural Properties of V2O5 Nanoflowers at Low Temperatures
Vanadium pentoxide nanoflowers were synthesized through a simple hydrothermal method at low temperatures. The structure was fabricated by using NH4VO3 and oxalic acid as precursors with 0.1 M solution concentration. The morphology and structural properties of the
nanoflowers were characterized using FESEM, XRD, Raman, and UV-Visible spectroscopy. The results reveal an orthorhombic structure with preferred orientation along (001) plane of the prepared V2O5 nanoflowers. Raman peaks also expressed the same structural features. FESEM
images showed the V2O5 nanoflower with diameters in the range of 60-80 nm and length in 600-800 nm. A red-shift was observed in the characteristic absorption peak of V2O5 nanoflowers, which are attributed to the decrease of the bandgap of the samples
Chromaticity Properties Of Curcuminoids Dye Nanofibers Prepared By Electrospinning For White Light Downconversion
In this study, the chromaticity properties of curcuminoids dye were studied when it be in nanometer scale, where curcuminoids were loaded in nanofibers using the electrospinning technique. Poly(methyl methacrylate) PMMA was used in three types of viscosity (5, 10 and 15wt%) which were mixed with (curcuma longa L.) powder to produce curcuminoids solution by using the centrifuge to separate the curcuminoids solution from the impurities. Different amounts of polymer solution mixed with curcuminoids (1 to 5 ml) were spun by electrospinning to study its properties. The effect of annealing on samples was studied. The chromatic study of the samples and the effect of the amount and viscosity of the solution were studied by pumping the samples in three different LED wavelengths (365, 390 and 445 nm). The white light chromaticity coordinates (CIE), color temperature (CCT) and color rendering index (CRI) were measured. The optimum CIE, CRI and CCT values of (X = 0.3051; Y = 0.3370), 64 and 6809K, respectively were obtained. By using field emission scanning electron microscope (FESEM) device, the curcuminoids nanofibers diameter was measured, where the values obtained ranged between 191 to 234 nm. After the annealing process, 15 nm nanoparticles were obtained
Role of vanadium ions substitution on spinel MnCo2O4 towards enhanced electrocatalytic activity for hydrogen generation
This is the final version. Available on open access from Nature Research via the DOI in this recordData availability:
The datasets used and/or analyzed during the current study are available from the corresponding author on reasonable request.Improving efficient electrocatalysts (ECs) for hydrogen generation through water splitting is of significant interest in tackling the upcoming energy crisis. Sustainable hydrogen generation is the primary prerequisite to realizing the future hydrogen economy. This work examines the electrocatalytic activity of hydrothermally prepared vanadium doped MnCo spinel oxide microspheres (MC), MnVxCo2−xO4 (Vx-MnCo MC, where x ≤ 0.4) in the HER (hydrogen evolution reaction) process. Magnetization measurements demonstrated a paramagnetic (at high temperatures) to a ferrimagnetic (at low temperatures) transition below the Curie temperature (Tc) in all the samples. The magnetization is found to intensify with the rising vanadium content of MCs. The optimized catalyst Vx-MnCo MCs (x = 0.3) outperformed other prepared ECs with a Tafel slope of 84 mV/dec, a low onset potential of 78.9 mV, and a low overpotential of 85.9 mV at a current density of 10 mA/cm2, respectively. The significantly improved HER performance of hydrothermally synthesized Vx-MnCo MCs (x = 0.3) is principally attributable to many exposed active sites, accelerated electron transport at the EC/electrolyte interface, and remarkable electron spectroscopy for chemical analysis (ECSA) value was found ~ 11.4 cm2. Moreover, the Vx-MnCo MCs (x = 0.3) electrode exhibited outstanding electrocatalytic stability after exposure to 1000 cyclic voltametric cycles and 36 h of chronoamperometric testing. Our results suggest a feasible route for developing earth-abundant transition metal oxide-based EC as a superior electrode for future water electrolysis applications.British CouncilKACARE Fellowshi
Effect of Annealing Temperature on Growth Particles of YAG: Ce +3 Phosphor and White Light Chromaticity Values
In the present work white-emitting Y3A15O12:xCe3 (x = 0.04) nanophosphor in the form Of powder were synthesized by a microwave-induced combustion synthesis method (MW)
Using metal nitrates as precursors and urea as fuel. By covering blue light-emitting diodes (blue-LED, 445 nm) white light emission (WLED)was generated. The sintering temperature with fixed time (5 hours) for phosphor powder was optimized and found to be 1050 °C. The crystallinity structure, luminescent properties and chromaticity were characterized by X-ray diffraction (XRD), field emission-scanning electron microscope (FE-SEM), electroluminescence (EL) and standard CIE 1931
Chromaticity diagram. The results show that the obtained YAG:Ce+3 phosphor sintered at 1050°C has good crystallinity with pure phase, low agglomeration particles and strong yellow emission that offering daylight white LED with tuneable correlated color temperature (CCT) and a good colour rendering index (CRI) compared to those sintered at 950 °C, 850°C and non-sintered phosphor powders
Alterations in the magnetic and electrodynamic properties of hard-soft Sr0.5Ba0.5Eu0.01Fe12O19/NixCuyZnwFe2O4 nanocomposites
Hard/soft (H/S) Sr0.5Ba0.5Eu0.01Fe12O19/NixCuyZnwFe2O4 nanocomposites (NCs) were produced via a one-pot sol–gel auto-combustion procedure. Phase and surface analyses were performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HR-TEM). Magnetization measurements for H/S NCs with different x, y, and w ratios were investigated at two different temperatures (300 and 10 K). The M−H curves were not smooth for the different H/S NCs, revealing that the exchange interaction was incomplete. The derivative of the magnetization (dM/dH versus H) exhibited two separate peaks, confirming the non-coupled H/S mixtures. Maximum saturation magnetization (Ms) values of 93.9 and 63.1 emu/g were obtained at 10 and 300 K, respectively, for the H/S Sr0.5Ba0.5Eu0.01Fe11.99O19/Ni0.3Cu0.3Zn0.4Fe2O4 NC, which contained the highest content of Zn and the same contents of Ni and Cu within the soft magnetic phase. The calculated squareness ratios (SQR = Mr/Ms) were less than 0.5, indicating incomplete exchange coupling. The coercive field (Hc) of the produced NCs reached a maximum value of approximately 2485 Oe at 300 K and 2331 Oe at 10 K with a decrease in the Ms values to 56.9 emu/g at 300 K and 78.5 emu/g at 10 K for the H/S Sr0.5Ba0.5Eu0.01Fe11.99O19/Ni0.8Cu0.1Zn0.1Fe2O4 NC, which contained lower fractions of Zn and Cu and the highest fraction of Ni. The reflection/transmission-based waveguide approach was employed to investigate the electrodynamic properties of the H/S NC samples within a frequency band of 7–18 GHz. The reflection and transmission coefficients (S11/S21) were measured using a vector network analyzer (VNA) for the sample placed inside a waveguide. The frequency dispersions of the magnetic permeability and electric permittivity were calculated. © 2021 The Author(s)2020-164-IRMC; King Fahd University of Petroleum and Minerals, KFUPM; Russian Science Foundation, RSF: 21-79-10115This study was supported by the Deanship of Scientific Research of Imam Abdulrahman Bin Faisal University (Dammam, Saudi Arabia) through Grant No. 2020-164-IRMC . The authors also acknowledge support from the Center for Communication Systems and Sensing at KFUPM . Electromagnetic measurements and analysis were partially supported by the Russian Science Foundation (Agreement No. 21-79-10115)
Magnetic and microwave properties of SrFe12O19/MCe0.04Fe1.96O4 (M = Cu, Ni, Mn, Co and Zn) hard/soft nanocomposites
This paper reports the synthesis, structural characteristics and magnetism of SrFe12O19/MCe0.04Fe1.96O4 (M = Cu, Ni, Mn, Co and Zn) hard/soft nanocomposites. The hard/soft compositions were manufactured via a one-pot reactions citrate sol-gel approach. The hard/soft phases formation was confirmed using XRD, SEM, TEM and HRTEM techniques. M vs. H (Magnetization measurements) were done at unbent temperature and 10 K. Smoothed M against H loops and single peaks in dM/dH vs. H curves were noticed in SrFe12O19/MnCe0.04Fe1.96O4, SrFe12O19/CuCe0.04Fe1.96O4 and SrFe12O19/ZnCe0.04Fe1.96O4 hard/soft nanocomposites. This indicated the manifestation of well exchange-coupled effect among hard and soft phases in these composites. However, SrFe12O19/CoCe0.04Fe1.96O4 and SrFe12O19/NiCe0.04Fe1.96O4 hard/soft nanocomposites showed non-well smoothed M against H loops and two peaks in dM/dH versus H plots, indicating that the dipolar interactions are unimportant compared to exchange-coupling behavior. Among all prepared nanocomposites, the SrFe12O19/MnCe0.04Fe1.96O4 hard/soft nanocomposite showed the highest exchange-coupling behavior. Microwave properties of the SrFe12O19/MCe0.04Fe1.96O4 (M = Cu, Ni, Mn, Co and Zn) hard/soft nanocomposites were investigated using coaxial method with applied frequency values fall between 2 and 18 GHz. Reflection losses were calculated from frequency dependences of the imaginary and real parts of permeability and permittivity. The correlation between the chemical composition of the spinel phase (A-cation) and microwave properties of composites. Most intensive electromagnetic absorption was observed for Ni- and Mn-spinels. This is can be a result of the differences in electron shell configuration and radii for A-site ions in the spinel phase. Change of the absorption mechanisms (transition from ionic polarization to dipole polarization) was observed. © 2020 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).The work was supported by the Russian Science Foundation (agreement number 19-72-10071 ). Also Authors are thank to the Institute for Research & Medical Consultations (Projects Application No. 2018-IRMC-S-2 ) of Imam Abdulrahman Bin Faisal University (IAU – Saudi Arabia) for financial and technical supports
Functional sr0.5ba0.5sm0.02fe11.98o4/x(ni0.8zn0.2fe2o4) hard-soft ferrite nanocomposites: Structure, magnetic and microwave properties
This paper reports the correlation between the composition of the functional Sr0.5Ba0.5Sm0.02Fe11.98O19/x(Ni0.8Zn0.2Fe2O4) hard-soft nanocomposites (SrBaSmFe/x(NiZnFe) NCs), where 0.0 ≤ x ≤ 3.0, and their structural features, magnetic, and microwave properties. SrBaSmFe/x(NiZnFe) hard/soft ferrite NCs are produced using the one-pot citrate combustion method. According to the XRD analysis, all samples showed the co-existence of both SrBaSmFe and NiZnFe phases in different ratios. Magnetic properties are measured in a wide range of magnetic fields and temperatures (10 and 300 K) and correlated well with the composition of the investigated samples. The microwave properties (frequency dispersions of the magnetic permeability, and electrical permittivity) are discussed by using the co-axial method in the frequency range of 0.7-18 GHz. Non-linear dependences of the main microwave features were observed with varying of composition. The microwave behavior correlated well with the composite theory. These results could be used in practice for developing antenna materials. © 2020 by the authors.This work was financially supported by the Deanship for Scientific Research (Project application No. 2020-164-IRMC) of Imam Abdulrahman Bin Faisal University (IAU—Saudi Arabia). The work was partially supported by the Russian Science Foundation (Agreement No. 19-72-10071 from 06 August 2019)
- …