Anatomical variations and bilateral symmetry of roots and root canal system of mandibular first permanent molars in Saudi Arabian population utilizing cone- beam computed tomography

Aim: The aim of the study was to evaluate the anatomical variations of the roots and root canal system, and to determine the symmetry between right and left sides of mandibular first permanent molars in Saudi Arabian population using images derived from cone beam computed tomography (CBCT) scans. Methods: The CBCT scans (with the following parameters: FOV 170 × 120 mm, 90 Kv, 5–8 mA, 17.5 s exposure time and 0.25 mm voxel size) were retrieved from the database and axial, coronal and sagittal sections of mandibular first molars were examined. The number of roots, canals and type of canal configuration based on Vertucci's classification were recorded. Bilateral symmetry between right and left side of the same individuals and differences between genders were investigated. Results: Out of 174 mandibular first molars, 97.1% were two rooted and 2.9% were three rooted (distolingual root). In regards to the number of canals, 73% had three, 25.3% had four and 1.7% had two root canals. In teeth with four root canals, 90.9% of the extra canal was in the distal root, while 9.1% in the extra distolingual root. The most common canal configuration in mesial and distal root were type IV (64.9%) and type I (77%), respectively. Symmetrical analysis revealed 100% symmetry in number of roots and 56.4% in number of canals between right and left teeth in the same individual. Conclusions: Within the limitation of this study, wide range of canals configurations were noted in mandibular first molars among the Saudi Arabian population. The prevalence of three rooted mandibular first molars was relatively low. Three canals were most commonly seen in mandibular first molars. Bilateral symmetry was varied in number of canals and canals configurations, which could be of clinical significance while performing root canal treatment on both side mandibular first permanent molars

Prevalence of Zygomatic Air Cell defects in a sample of 6-18-year-old patients in Saudi Arabia and Yemen: a retrospective study

Objectives: This study aimed to comprehensively analyze the prevalence and influencing factors of Zygomatic Air Cell Defects (ZACD) among pediatric and adolescent populations in Saudi Arabia and Yemen. Materials and methods: A cross-sectional retrospective study was conducted, utilizing digital panoramic radiographs of dental outpatients aged 6 to 18 years. The data were collected from registered digital databases of dental clinics in Al-Qassim, Saudi Arabia, and an oral and maxillofacial radiology center in Sana’a, Yemen, covering the period from July 2018 to September 2022. The radiographs were evaluated based on inclusion and exclusion criteria, and ZACD was assessed using standardized descriptions. Statistical analysis, including logistic regression, was employed to examine the impact of the associated factors. Results: The study encompassed a total of 3,169 participants, revealing an overall ZACD prevalence of 28.5%. Age emerged as a significant predictor (p ≤ 0.0001), with the likelihood of ZACD increasing as the age of the individual advances. Gender and geographic region did not exhibit statistically significant differences in ZACD prevalence. Conclusion: This study provides crucial insights into the prevalence of Zygomatic Air Cell Defects among pediatric and adolescent populations in Saudi Arabia and Yemen. It underscores the prevalence of ZACD and the notable influence of age on its occurrence. Additionally, the research challenges prior notions of gender and regional variations in ZACD prevalence, emphasizing the complexity of the factors involved. Early detection is essential to avoid unwanted complications during any surgical intervention in this area.Open access funding provided by Qatar University

Recommendations for standard criteria for the positional and morphological evaluation of temporomandibular joint osseous structures using cone-beam CT: a systematic review

Objective: This systematic review aimed to appraise the reliability and comprehensiveness of imaging methods in studies that used three-dimensional assessment of the temporomandibular joint (TMJ) in order to propose a standardized imaging method. Methods: Six databases/search engines were searched up until September 2022. The outcomes of interest included measurements of the mandibular condyle, glenoid fossa, joint spaces, or the entire TMJ. Two checklists were utilized: one to assess the risk of bias, with a maximum score of 37, and the other, a pre-designed checklist consisting of 22 items to evaluate the comprehensiveness of the methods used, with a maximum score of 33. Results: Out of the 2567 records retrieved, only 14 studies, which used cone bean computed tomography (CBCT), were deemed eligible and thus included in the qualitative analysis. Three studies were deemed of low risk of bias, while the remaining studies were rated as moderate to high risk of bias, primarily due to improper reporting of inter-observer agreement, varying reliability values, and a limited number of cases included in the reliability analysis. Regarding the comprehensiveness of the methods used, only four studies achieved relatively high scores. The deficiencies observed were related to the reporting of variables such as slice thickness and voxel size, absence of or improper reporting of intra- and inter-examiner reliability analyses, and failure to assess all osseous components of the TMJ. Conclusion: CBCT-based methods used to assess the positions and morphology of TMJ bony structures appear to be imperfect and lacking in comprehensiveness. Hence, criteria for a standardized assessment method of these TMJ structures are proposed. Clinical relevance statement: Accurately, comprehensively, and reliably assessing the osseous structures of the temporomandibular joint will provide valid and valuable diagnostic features of the normal temporomandibular joint, and help establish potential associations between these osseous features and temporomandibular disorders. Registration: The protocol for this systematic review was registered at the International Prospective Register of Systematic Reviews (PROSPERO, No.: CRD42020199792). Key Points: •Although many methods have been introduced to assess the osseous structure of the temporomandibular joint, they yielded inconsistent findings. •None of the published studies comprehensively assessed the temporomandibular joint. •Recommendations for a comprehensive temporomandibular joint osseous assessment method were suggested for better validity and reliability of future research

Skeletal and dentoalveolar effects of class II malocclusion treatment using bi-maxillary skeletal anchorage: a systematic review

Background: The goal of this systematic review was to assess the available evidence regarding the skeletal and dentoalveolar effects of bi-maxillary skeletal anchorage devices (BMSADs) used in treating growing class II malocclusion patients. Methods: A comprehensive search was conducted on PubMed, Scopus, Science Direct, Web of Science, Cochrane, and LILACS up to November 2021, which was augmented by a manual search. The studies included were clinical trials (RCTs) and/or follow-up observational studies (retrospective and prospective). The outcomes of interest were the skeletal, dentoalveolar, and occlusal treatment-induced changes obtained from pre- and post-cephalometric measurements. The risks of bias of the included studies were assessed using an assessment tool from previous publications. Results: Out of 742 screened articles, only 4 were eligible and thus included in the qualitative synthesis. They showed a moderate overall risk of bias. The results are presented as mean changes in both the study and control groups. All studies reported retrusion of the maxillary base and advancement of the mandible (meaning reduced ANB angle). Three of the included studies reported an increase in the vertical jaw relation, which was contrary to what the fourth study reported. Three studies reported an increase in the maxillary incisors’ inclination or position, while one study reported their retroclination. Proclination of the mandibular incisors happened in two studies, whereas the other two studies reported retroclination. The overjet was reduced in all included studies. Conclusion: Apart from the protrusive effects on the mandible, retrusive effects on the maxilla, and the consequent reduction of the overjet, BMSADs results in inconsistent skeletal and dentoalveolar effects. However, the current evidence is limited due to the variability in the biomechanics of the intermaxillary components, type of anchorage, and comparable groups in the included studies. Further RCTs with more standardized methodologies are highly encouraged. Clinical relevance: BMSADs (using miniscrews or miniplates on both jaws) induces more skeletal than dentoalveolar effects. However, this must be practiced with caution, based on the benefit to risk (surgical insertion) ratio, and the limited evidence available in hand so far. Registration The protocol for this systematic review was registered at the International Prospective Register of Systematic Reviews (PROSPERO, No.: CRD42020199601)

Predictive factors associated with adjacent teeth root resorption of palatally impacted canines in Arabian population: a cone-beam computed tomography analysis

Background: This study aimed to evaluate three-dimensionally the factors associated with adjacent teeth root resorption of palatally impacted canines. Methods: In this retrospective cross-sectional study, one-hundred and fourteen cone beam computed tomography scans with palatally impacted maxillary canines were evaluated for the presence of adjacent root resorption. Seven parameters were analyzed: alignment of maxillary incisors, presence of deciduous canines, first premolars’ roots configuration, impacted canines rotation, angulation of impacted canine to the midline, contact relationship, and area of contact with adjacent teeth. The association between dependent and independent qualitative and quantitative variables was analyzed using chi-square and independent student’s t-test, respectively. The multivariate analysis was performed using regression analysis. The significant value was set at P ≤ 0.05. Results: The overall incidence of vertical, horizontal impaction and adjacent root resorption were 92, 8 and 77.2%, respectively. The apical third was the most involved area (57%); resorption of a single tooth was found in 21.9% of the total sample. The most common resorbed teeth were lateral first premolars (24.6%), followed by central lateral incisors (20.2%), and lateral incisors (15.8%) of the total sample. The severity of resorption was highest in grade I (31.5%) and lowest in grade III (7.6%). Three variables showed significant differences between resorption and non-resorption groups namely; canine rotation (P < 0.013), contact relationship (P < 0.001), and area of contact with adjacent teeth (P < 0.001). Regression analysis revealed an association between adjacent root resorption and permanent canine rotation, adjacent premolars’ roots configuration, contact relationship, and area of contact (P < 0.05). Conclusion: Two-thirds of impacted maxillary canines showed a form of root resorption. The most commonly resorbed tooth was the lateral incisors while the least affected one was the central incisors with apical one-third being of the highest risk. The predisposing factors including the canine rotation, premolar with separated roots, contact relationship, and area of contact with adjacent teeth are to be considered for any interceptive treatment

Orthodontic camouflage versus orthodontic-orthognathic surgical treatment in borderline class III malocclusion: a systematic review.

This systematic review evaluated the available evidence regarding the skeletal, dentoalveolar, and soft tissue effects of orthodontic camouflage (OC) versus orthodontic-orthognathic surgical (OOS) treatment in borderline class III malocclusion patients. Eligibility criteria. The included studies were clinical trials and/or follow-up observational studies (retrospective and prospective). Information sources. PubMed, Scopus, Science Direct, Web of Science, Cochrane, and LILACS were searched up to October 2021. Risk of bias. Downs and Black quality assessment checklist was used. Synthesis of results. The outcomes were the skeletal, dentoalveolar, and soft tissue changes obtained from pre- and post-cephalometric measurements. Included studies. Out of 2089 retrieved articles, 6 were eligible and thus included in the subsequent analyses. Their overall risk of bias was moderate. Outcome results. The results are presented as pre- and post-treatment values or mean changes in both groups. Two studies reported significant retrusion of the maxillary and mandibular bases in OC, in contrast to significant maxillary protrusion and mandibular retrusion with increased ANB angle in OOS. Regarding the vertical jaw relation, one study reported a significant decrease in mandibular plane inclination in OC and a significant increase in OOS. Most of the included studies reported a significant proclination in the maxillary incisors in both groups. Three studies reported a significant proclination of the mandibular incisors in OOS, while four studies reported retroclination in OC. Interpretation. The OSS has a protrusive effect on the maxillary base, retrusive effect on the mandibular base, and thus improvement in the sagittal relationship accompanied with a clockwise rotational effect on the mandibular plane. The OC has more proclination effect on the maxillary incisors and retroclination effect on the mandibular incisors compared to OOS. Limitation. Meta-analysis was not possible due to considerable variations among the included studies. Owing to the fact that some important data in the included studies were missing, conducting further studies with more standardized methodologies is highly urgent. Registration. The protocol for this systematic review was registered at the International Prospective Register of Systematic Reviews (PROSPERO, No.: CRD42020199591). The common features including skeletal, dental, and soft tissue characteristics of borderline class III malocclusion cases make it more difficult to select the most appropriate treatment modality that can be either OC or OOS. The availability of high-level evidence-systematic reviews-makes the clinical decision much more clear and based on scientific basis rather than personal preference.Open Access funding provided by the Qatar National Library

Qualitative and quantitative three-dimensional evaluation of maxillary basal and dentoalveolar dimensions in patients with and without maxillary impacted canines

Background: This study aimed to three-dimensionally evaluate the qualitative and quantitative maxillary basal, dentoalveolar, and dental dimensions in patients with unilateral or bilateral maxillary impacted canines relative to their normal peers. Materials and methods: This is a retrospective comparative study. Cone-beam computed tomography images of one hundred and fifty adult patients were divided into three equal groups: unilateral, bilateral, and control groups. Each had 50 patients that were three-dimensionally analysed. The quantitative measurements involved three basal (molar basal width, premolar basal width, and arch depth), seven dentoalveolar (molar alveolar width, premolar alveolar width, inter-molar width, inter-premolar width, inter-canine width, arch length, and arch perimeter), and two dental (canine length and width) measurements. The qualitative measurements included four bone density areas (buccal, lingual, mesial, and distal) around the maxillary impacted canines. Result: Differences between the three groups were statistically different for the quantitative measurements involving the two basal variables (molar basal width and premolar basal width) and all measured dentoalveolar variables; these were smaller in the unilateral and bilateral groups compared with the control group (p < 0.001). Unilateral and bilateral impacted canine groups showed significantly wider and shorter canines than the control group (p < 0.001). The qualitative measurements (the four bone density areas) around unilateral and bilateral impacted canine groups showed significantly greater density than the control group (p < 0.001). There was no significant qualitative or quantitative difference between the unilateral and bilateral impacted canines. The three groups had no significant variations in terms of arch depth. Conclusion: Maxillary unilateral and bilateral canine impactions are associated with reduced basal and dentoalveolar dimensions as well as wider and shorter maxillary canines compared to normal peers. The quality of bone around unilateral and bilateral impacted maxillary canines is higher than in non-impacted cases. Unilateral and bilateral canine impactions have quite similar qualitative and quantitative parameters.The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: this study is supported by The Natural Foundation of Gansu Province, China (1208RJZA236), the Key Technology Plane Program of Gansu Province, China (20YF8FA071), the Key Technology Support Program of Gansu Province, China (1604FKCA089), and the Open Subject Foundation of Key Laboratory of Dental Maxillofacial Reconstruction and Biological Intelligence Manufacturing (20JR10RA653—ZDKF20210401), School of Stomatology, Lanzhou University, Gansu Province, Lanzhou 730000, PR China

Dimensional and positional temporomandibular joint osseous characteristics in normodivergent facial patterns with and without temporomandibular disorders

Objective: This study evaluated the dimensional and positional osseous temporomandibular joint features in normodivergent facial patterns with and without temporomandibular disorders. Methods: A total of 165 adult patients were divided into two groups: group 1 (n = 79 patients; 158 joints): temporomandibular disorders patients and group 2 (n = 86 patients; 172 joints): non-temporomandibular disorders patients. Three-dimensional positional and dimensional temporomandibular joint characteristics, including glenoid fossa, mandibular condyles, and joint spaces, were assessed by cone beam computed tomography. Results: The glenoid fossa positions in the three orthogonal planes and height showed statistical significance between the two studied groups. The temporomandibular disorders patients showed higher horizontal and vertical condyle inclinations while anteroposterior inclination was less, and the condyle was positioned more superior, anterior, and lateral in the glenoid fossa. The condyle width and length showed no significance between the two groups, while condyle height was smaller in temporomandibular disorders patients. Anterior and medial joint spaces increased while the superior and posterior joint spaces reduced in temporomandibular disorders patients. Conclusion: There were significant differences between the patients with and without temporomandibular joint disorders in terms of mandibular fossa positions and height as well as condylar positions and inclinations in horizontal and vertical planes together with reduced condylar height and reduced posterior and superior joint spaces in the temporomandibular disorders patients. Clinical relevance: The temporomandibular disorder is a multifactorial disorder in which one of these factors is the dimensional and positional characteristics of the temporomandibular joints; including or excluding this factor requires a comprehensive three-dimensional investigation of patients with TMD compared to the normal group under the condition that the facial pattern is average as a confounding factor.Scopu

Evaluation of an objective staging system for assessment of cervical vertebral maturation

Background: The aim of this study was to evaluate an objective method for Cervical Vertebral Maturation (CVM) staging. Methods: An initial sample of 647 Lateral Cephalometric Radiographs (LCR) were staged according to the CVM (Baccetti et al.) by 4 examiners. The final sample (n = 394) included LCR on which the staging of the 4 investigators matched. The objective staging was performed by a single operator. The sample was divided according to the maturational stages into pre-pubertal, pubertal and post-pubertal groups. Measurements were performed on the cervical vertebrae (C2, C3 and C4). The angle between posterior and superior borders for C3 and C4 was the Superior Wall Inclination Angle (SWIA). Concavity Depth (CD) for C2, C3 and C4, and Body Shape (BS) (ratio of width to height of C3 and C4). Measurements of the 3 groups were compared. Results: Reliability of subjective staging was high (intra-observer reliability, 0.948; inter-observer reliability, 0.967). Good agreement was observed for the outcomes measured. Intra-observer reliability was good (0.918, 0.885 and 0.722 for CD, BS and SWIA, respectively). The same was for the inter-observer reliability results (0.902, 0.889 and 0.728 for CD, BS and SWIA, respectively). Significant differences were observed for mean values of SWIA and BS and median values of CD within maturational stage. Similar findings were observed when the outcomes were compared at different phases (P < 0.001). Conclusions: A standardized, objective staging system using linear, angular measurements and ratios was applied for the determination of cervical vertebral maturation

Morphological and dimensional variations of the frontal air sinuses in a group of adolescent Caucasians and Chinese in different skeletal malocclusions: a cross-sectional cephalometric study.

This study aimed to evaluate the morphological and dimensional variations of the frontal air sinuses in a group of adolescent Caucasians and Chinese with different skeletal malocclusions in both genders. This retrospective study included 290 adolescent Caucasians and Chinese patients with 145 each. Each sample included 90 females and 55 males and was categorized based on ANB angle in reference to each population norms into 65 skeletal class I, 50 skeletal class II, and 30 skeletal class III malocclusions. All linear, angular, and surface area measurements of the frontal air sinuses were evaluated using lateral cephalometric radiographs and calculated using Winceph version 8 software. The frontal air sinus parameters were compared between genders and the two ethnic groups using an independent sample t-test. ANOVA with Tukey's post hoc tests were used to compare the frontal air sinus parameters between the three skeletal malocclusions. The frontal air sinus width and surface area were found to be significantly greater in Caucasians when compared with Chinese patients. According to gender, the frontal air sinus length, width, and surface area, as well as the glabella convexity, were greater in males than females, while the frontal air sinus index (length/width) was significantly greater in females than males in both ethnic groups. In both ethnic groups, the frontal air sinus surface area was significantly greater in skeletal class III malocclusion when compared to skeletal class I and class II malocclusions in Caucasians (P = 0.0022) and Chinese (P = 0.0097). There was a weak-to-moderate correlation between the frontal air sinus parameters and the nasio, sella, and glabella positions (R = -0.56 to 0.62). The frontal air sinus dimensions and surface area varied greatly in between ethnic groups, genders, and malocclusion types. The frontal air sinus parameters were correlated with nasion, sella, and glabella positions. These findings could assist orthodontists, ENT specialist, and forensic medical investigators to focus on the size of frontal sinus during treatment planning, the relationship between the size of frontal air sinus and malocclusions, and age determination