Phytochemical analysis and bioactivity screening of three medicinal plants of Saudi Arabia

Purpose: To investigate the phytochemical analysis and bioactivity screening of some Asteraceae medicinal plants. Methods: The chemical constituents were isolated by column chromatography and elucidated using chemical and extensive spectroscopic methodologies including gas chromatoraphy-mass spectrometry (GC-MS), Fourier transform infrared spectroscopy (FTIR), as well as 1D and 2D nuclear magnetic resonance (NMR). The plant extracts were obtained by solvent extraction method while hydrodistillation was used to isolate plant essential oils. Furthermore, cup-plate agar diffusion was applied for antimicrobial activity evaluation while minimum inhibitory concentration (MIC) was assessed by microdilution technique. Results: Centaurea pseudosinaica, Tripleurospermum auriculatum, and Koelpinia linearis afforded previously undescribed three coumarins (xanthotoxin, cirsimaritin, salvigenins) from C. pseudosinaica, one steroid (estradiol) and a pentacyclic triterpene (β-amyrin) from T. auriculatum and a coumarin (santin) from K. linearis in good yields. In addition, the plant extracts and oils exhibited remarkable bioactivities including antifungal, antibacterial and antipyretic etc. Conclusion: The results reveal the presence of bioactive phytomolecules from Asteraceae plant extracts and volatile oils from three Asteraceae plants. Keywords: C. pseudosinaica, T. auriculatum, K. linearis, Xanthotoxin, Salvigenin, Cirsimaritin, Santin, Estradiol, β-amyrin, Antimicrobial activit

Ecofriendly Synthesis of Silver Nanoparticles Using Aqueous Extracts of Zingiber officinale (Ginger) and Nigella sativa L. Seeds (Black Cumin) and Comparison of Their Antibacterial Potential

Applications of chemical synthetic methods for the preparation of metal nanoparticles involve toxic reagents, which are hazardous to both humans and the environment. On the other hand, ecofriendly plant-based techniques offer rapid, non-toxic, and suitable alternatives to the traditional methods. Herein, we report an eco-friendly method for the preparation of silver nanoparticles (Ag NPs) using two different aqueous extracts of Zingiber officinale (ginger) and Nigella sativa L. seeds (black cumin). Successful preparation of Ag NPs was confirmed by X-ray diffraction, ultraviolet–visible (UV-Vis) spectroscopy, and energy dispersive spectroscopy (EDX). Transmission electron microscopy (TEM) analysis revealed that Nigella sativa L. seed extract (NSE) produced a smaller size of NPs (~8 nm), whereas the ginger extract (GE) led to the formation of slightly larger Ag NPs (~12 nm). In addition, to study the effect of concentration of the extract on the quality of resulting NPs, two different samples were prepared from each extract by increasing the concentrations of the extracts while using a fixed amount of precursor (AgNO3). In both cases, a high concentration of extract delivered less agglomerated and smaller-sized Ag NPs. Furthermore, the antibacterial properties of as-prepared Ag NPs were tested against different bacterial strains. Notably, despite the slightly better quality of Ag NPs obtained from NSE (NSE-Ag), NPs prepared by using GE (GE-Ag) demonstrated superior antibacterial properties. In case of the plant-extract-based synthesis of nanoparticles, it is widely reported that during the preparation, the residual phytomolecules remain on the surface of resulting NPs as stabilizing agents. Therefore, in this case, the high antibacterial properties of GE-Ag can be attributed to the contributing or synergetic effect of residual phytomolecules of GE extract on the surface of Ag NPs, since the aqueous extract of GE has been known to possess higher intrinsic bactericidal properties when compared to the aqueous NSE extract

Evaluation of the Anticancer Activity of Phytomolecules Conjugated Gold Nanoparticles Synthesized by Aqueous Extracts of Zingiber officinale (Ginger) and Nigella sativa L. Seeds (Black Cumin)

The conventional physical and chemical synthetic methods for the preparation of metal nanoparticles have disadvantages as they use expensive equipment and hazardous chemicals which limit their applications for biomedical purposes, and are not environment friendly. However, for the synthesis of biocompatible nanomaterials, plant-based techniques are eco-friendly and easy to handle. Herein a simple, single-step biosynthesis of gold nanoparticles using aqueous extracts of Nigella sativa (NSE) and Zingiber officinale (GE) as a reducing and capping agent has been demonstrated. The formation of gold nanoparticles (Au NPs) was confirmed by X-ray diffraction, UV-Vis, and EDS spectroscopies. Spectroscopic and chromatographic analysis of GE and NSE revealed the presence of bioactive phytochemical constituents, such as gingerol, thymoquinone, etc., which successfully conjugated the surface of resulting Au NPs. TEM analysis indicated the formation of smaller-sized, less-aggregated, spherical-shaped Au NPs both in the case of GE (~9 nm) and NSE (~11 nm). To study the effect of the concentration of the extracts on the quality of resulting NPs and their anticancer properties, three different samples of Au NPs were prepared from each extract by varying the concentration of extracts while keeping the amount of precursor constant. In both cases, high-quality, spherical-shaped NPs were obtained, only at a high concentration of the extract, whereas at lower concentrations, larger-sized, irregular-shaped NPs were formed. Furthermore, the as-prepared Au NPs were evaluated for the anticancer properties against two different cell lines including MDA-MB-231 (breast cancer) and HCT 116 (colorectal cancer) cell lines. GE-conjugated Au NPs obtained by using a high concentration of the extract demonstrated superior anticancer properties when compared to NSE-conjugated counterparts

Miswak mediated green synthesized palladium nanoparticles as effective catalysts for the Suzuki coupling reactions in aqueous media

Green and eco-friendly synthesis of palladium nanoparticles NPs is carried out under facile and eco-friendly conditions using an aqueous solution of Salvadora persica L. (SP) root extract (RE) as a bioreductant, which is commonly known as Miswak. The as-synthesized Pd NPs were characterized using various spectroscopic and microscopic techniques, including, UV–Vis spectroscopy, FT-IR spectroscopy, XRD, ICP-MS and TEM. Detailed investigations of the Pd NPs have confirmed that the polyphenolic phytomolecules present in the RE of Miswak not only act as a bioreductant by facilitating the reduction and growth of Pd NPs, but they also functionalize the surface of Pd NPs and stabilized them in various solvents. Furthermore, the catalytic activity of the green synthesized Pd NPs was also tested toward the Suzuki coupling reactions of various aryl halides in aqueous media. The as-prepared Pd NPs exhibited superior catalytic activity and reusability for the Suzuki coupling reaction in aqueous and aerobic conditions. The kinetics of the reaction studied by GC revealed that the conversion of various aryl halides to biphenyl takes place in a short time

“Miswak” Based Green Synthesis of Silver Nanoparticles: Evaluation and Comparison of Their Microbicidal Activities with the Chemical Synthesis

Microbicidal potential of silver nanoparticles (Ag-NPs) can be drastically improved by improving their solubility or wettability in the aqueous medium. In the present study, we report the synthesis of both green and chemical synthesis of Ag-NPs, and evaluate the effect of the dispersion qualities of as-prepared Ag-NPs from both methods on their antimicrobial activities. The green synthesis of Ag-NPs is carried out by using an aqueous solution of readily available Salvadora persica L. root extract (RE) as a bioreductant. The formation of highly crystalline Ag-NPs was established by various analytical and microscopic techniques. The rich phenolic contents of S. persica L. RE (Miswak) not only promoted the reduction and formation of NPs but they also facilitated the stabilization of the Ag-NPs, which was established by Fourier transform infrared spectroscopy (FT-IR) analysis. Furthermore, the influence of the volume of the RE on the size and the dispersion qualities of the NPs was also evaluated. It was revealed that with increasing the volume of RE the size of the NPs was deteriorated, whereas at lower concentrations of RE smaller size and less aggregated NPs were obtained. During this study, the antimicrobial activities of both chemically and green synthesized Ag-NPs, along with the aqueous RE of S. persica L., were evaluated against various microorganisms. It was observed that the green synthesized Ag-NPs exhibit comparable or slightly higher antibacterial activities than the chemically obtained Ag-NPs

Plant Extract Mediated Eco-Friendly Synthesis of Pd@Graphene Nanocatalyst: An Efficient and Reusable Catalyst for the Suzuki-Miyaura Coupling

Suzuki-Miyaura coupling reaction catalyzed by the palladium (Pd)-based nanomaterials is one of the most versatile methods for the preparation of biaryls. However, use of organic solvents as reaction medium causes a big threat to environment due to the generation of toxic byproducts as waste during the work up of these reactions. Therefore, the use of water as reaction media has attracted tremendous attention due to its environmental, economic, and safety benefits. In this study, we report on the synthesis of green Pd@graphene nanocatalyst based on an in situ functionalization approach which exhibited excellent catalytic activity towards the Suzuki–Miyaura cross-coupling reactions of phenyl halides with phenyl boronic acids under facile conditions in water. The green and environmentally friendly synthesis of Pd@graphene nanocatalyst (PG-HRG-Pd) is carried out by simultaneous reduction of graphene oxide (GRO) and PdCl2 using Pulicaria glutinosa extract (PGE) as reducing and stabilizing agent. The phytomolecules present in the plant extract (PE) not only facilitated the reduction of PdCl2, but also helped to stabilize the surface of PG-HRG-Pd nanocatalyst, which significantly enhanced the dispersibility of nanocatalyst in water. The identification of PG-HRG-Pd was established by various spectroscopic and microscopic techniques, including, high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), ultraviolet–visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), and Raman spectroscopy. The as-prepared PG-HRG-Pd nanocatalyst demonstrated excellent catalytic activity towards the Suzuki-Miyaura cross coupling reactions under aqueous, ligand free, and aerobic conditions. Apart from this the reusability of the catalyst was also evaluated and the catalyst yielded excellent results upon reuse for several times with marginal loss of its catalytic performance. Therefore, the method developed for the green synthesis of PG-HRG-Pd nanocatalyst and the eco-friendly protocol used for the Suzuki coupling offers a mild and effective substitute to the existing protocols and may significantly contribute to the endeavors of green chemistry

Green Synthesis and Characterization of Palladium Nanoparticles Using Origanum vulgare L. Extract and Their Catalytic Activity

The synthesis of Palladium (Pd) nanoparticles by green methods has attracted remarkable attention in recent years because of its superiority above chemical approaches, owing to its low cost and ecological compatibility. In this present work, we describe a facile and environmentally friendly synthesis of Pd nanoparticles (Pd NPs) using an aqueous extract of aerial parts of Origanum vulgare L. (OV) as a bioreductant. This plant is available in many parts of the world as well as in Saudi Arabia and is known to be a rich source of phenolic components, a feature we fruitfully utilized in the synthesis of Pd NPs, using various concentrations of plant extracts. Moreover, the OV extract phytomolecules are not only accountable for the reduction and progression of nanoparticles, but they also act as stabilizing agents, which was confirmed by several characterization methods. The as-synthesized Pd nanoparticles (Pd NPs) were analyzed using ultraviolet-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and thermal gravimetric analysis (TGA). Further, FT-IR study has proven that the OV not merely represents a bioreductant but also functionalizes the nanoparticles. Furthermore, the green synthesized metallic Pd NPs were successfully applied as catalysts for selective oxidation of alcohols

Green synthesis of Pd@graphene nanocomposite: Catalyst for the selective oxidation of alco

Due to their excellent physicochemical properties and synergistic effect, graphene metallic NPs based nanocomposites have gained significant attention in various technological fields including catalysis. Here we demonstrate a single pot, facile and environmental friendly synthesis of catalytically active palladium(Pd)@graphene nanocomposites (SP-HRG-Pd) by the simultaneous reduction of graphene oxide (GRO) and PdCl2 using Salvadora persica L. (miswak) root extract (RE) as bioreductant. The synthesis of SP-HRG-Pd was confirmed by various spectroscopic and microscopic techniques, including ultraviolet–visible (UV–vis), Fourier-transform infrared (FT-IR), Raman and X-ray photoelectron (XPS) spectroscopy, X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). The polyphenolic (flavonoids) and terpenoids rich contents of the miswak RE not only facilitated the reduction of graphene oxide and PdCl2 but also ensured the homogeneous binding of the Pd NPs on graphene, and through stabilization of the surface of SP-HRG-Pd nanocomposites. This also led to the enhanced dispersibility of as synthesized nanocomposites in aqueous solutions. The as-prepared SP-HRG-Pd nanocomposites also demonstrated excellent catalytic activity toward the selective oxidation of aromatic alcohols. Furthermore, in order to study the effect of calcination temperature and concentration of Pd NPs on the catalytic activities of nanocomposites, different samples of SP-HRG-Pd nanocomposites containing different amounts of Pd using various concentrations of Pd precursor were prepared and calcined at various temperatures