Recent methods in the production of activated carbon from date palm residues for the adsorption of textile dyes: A review

Textile dyes are organic compounds that can pose an environmental threat if not properly treated. They can cause many problems ranging from human health, ecosystem disturbances, and the reduction of the esthetic value of water bodies. The adsorption process using activated carbon (AC) has been proven to be effective in treating dyes in wastewater. However, the production of AC is limited by the non-renewables and relatively expensive precursor of coal. Date palm residues (DPRs) provide a good alternative for AC’s precursor due to their continuous supply, availability in a large amount, and having good physiochemical properties such as high oxygen element and fixed carbon. This study provides a review of the potential of date palm residues (DPRs) as AC in adsorbing textile dyes and the recent technological advances adopted by researchers in producing DPR-based AC. This review article focuses solely on DPR and not on other biomass waste. This study presents a background review on date palms, textile dyes, biochar, and AC, followed by production methods of AC. In the literature, DPR was carbonized between 250 and 400°C. The conventional heating process employed an activation temperature of 576.85–900°C for physical activation and a maximum of 800°C for physicochemical activation. Chemical agents used in the chemical activation of DPR included NaOH, KOH, ZnCl2, H3PO4, and CaCl2. The maximum surface area obtained for DPR-AC was 1,092.34 and 950 m2/g for physical and chemical activation, respectively. On the other hand, conditions used in microwave heating were between 540 and 700 W, which resulted in a surface area of 1,123 m2/g. Hydrothermal carbonization (HTC) utilized carbonization temperatures between 150 and 250°C with pressure between 1 and 5 MPa, thus resulting in a surface area between 125.50 and 139.50 m2/g. Isotherm and kinetic models employed in the literature are also discussed, together with the explanation of parameters accompanied by these models. The conversion of DPR into AC was noticed to be more efficient with the advancement of activation methods over the years.King Abdulaziz City for Science and Technology - grant no. 13-ENV1102-02

Polycyclic Aromatic Hydrocarbons (PAHs) and Metals in Diverse Biochar Products: Effect of Feedstock Type and Pyrolysis Temperature

Biochar’s agricultural and environmental benefits have been widely demonstrated; however, it may cause environmental contamination if it contains large amounts of pollutants such as polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HMs). Therefore, this study aimed to assess the contents of PAHs and HM in a range of biochars generated from different sources and pyrolysis temperatures. A range of feedstock was converted to biochar, including sewage sludge (SS), olive mill pomace (OP), feather meal (FM), soft offal meal (CSM), chicken manure (CM), and date palm residues (DPR). Each feedstock was then pyrolyzed at three temperatures of 300, 500, or 700 °C, thereby producing a total of 18 types of biochar. These biochar products were analyzed for 16 PAHs and eight metals (Cr, Mn, Fe, Ni, Cu, Zn, Cd, and Pb). Benzo[b]fluoranthene, benzo[k]fluoranthene, and benzo(a)pyrene were significantly greater in the biochar produced at 700 °C than in that produced at 300 °C, especially for CM. The concentrations of dibenz(a,h)anthracene were significantly lower at 700 °C but greater at 500 °C and 300 °C in DPR. Increasing the pyrolysis temperature from 300 to 700 °C significantly increased the concentrations of metals, including Cr in SS and OP; Mn in CM; and Fe, Ni, Cu, and Zn in SS. However, the concentration of Cd was significantly lower in the SS when biochar was produced at 700 °C than at 500 or 300 °C. The type of feedstock used and the pyrolysis temperature are key factors influencing the contents of PAHs and HMs in biochar, both of which need to be considered during the production and use of biochar. Further investigations are recommended to establish the relationships between pyrolysis temperature and types of feedstock and the formation of PAH or the concentrations of metals. Monitoring the concentrations of PAHs and HMs before applying biochar to soil is also recommended

Conversion of a mixture of date palm wastes to mesoporous activated carbon for efficient dye adsorption

In this study, we aimed to develop mixture activated carbon (MAC) from a mixture of date palm wastes (petiole, rachis and fiber) through hydrothermal carbonization and microwave-assisted H3PO4 activation and evaluate its adsorption capacity to remove Remazol brilliant blue R (RBBR) from aqueous solution. The MAC was found to be mesoporous, with an average pore diameter and BET surface area of 2.61 nm and 641.23 m2 g−1, respectively. The zeta potential and FTIR results demonstrated that the surface of MAC was negatively charged in its natural state and filled with functional groups such as phenyl, secondary amine, alkyne, aldehyde, and hydroxy groups. The adsorption capacity and percentage removal of RBBR increased and decreased, respectively, when the initial concentration increased. Maximum removal of RBBR was achieved at pH 3 (96.69 mg g−1) and at 30 °C of solution temperature (85.79 mg g−1). Langmuir and pseudo-first-order were the best isotherm and kinetic models for describing the RBBR-MAC adsorption system, respectively. The thermodynamic parameters of ΔH°, ΔS°, ΔG°, and Ea implied that this adsorption system was exothermic, increased randomness at the liquid-solid interface, and was spontaneous and controlled by the physisorption type of sorption, respectively.King Abdulaziz City for Science and Technology - grant no. 13-ENV1102-02

Adsorption of Pb²⁺ by Activated Carbon Produced by Microwave-Assisted K₂CO₃ Activation of Date Palm Leaf Sheath Fibres

Date palm trees generate large amounts of various types of waste, including leaf sheath fibres, which can be used as a low-cost precursor for the production of biochar, including activated carbon (AC), which can be employed for the adsorption of contaminants. In the current study, activated carbon was produced from leaf sheath fibres of date palms (LSDPFAC) by the use of chemical activation with K2CO3 combined with microwave irradiation, and it was characterised and evaluated for its adsorptive capacity of lead ions (Pb2+). The Brunauer–Emmett–Teller (BET) surface area, Langmuir surface area, total pore volume and average pore diameter of the LSDPFAC were 560.20 m2/g, 744.31 m2/g, 0.29 cm3/g and 2.47 nm, respectively. A greater adsorption of Pb2+ was observed when its concentration was higher in the solution, and the greatest adsorption capacity of 5.67 mg Pb/g was observed at the highest pH. The results of isotherm and kinetic studies demonstrated that the adsorption of Pb2+ onto the LSDPFAC was best described by the Freundlich isotherm and pseudo-second-order (PSO) models. The Langmuir ΔG° and Ea were 6.39 kJ/mol, 0.12 kJ/mol K, −31.28 kJ/mol and 15.90 kJ/mol, respectively, which demonstrated that the adsorption of Pb2+ by the LSDPFAC was endothermic, spontaneous and governed by physisorption

Production of activated carbon from date palm stones by hydrothermal carbonization and microwave assisted KOH/NaOH mixture activation for dye adsorption

Abstract Date palm stones are regarded as possible alternatives to activated carbon (AC) precursors with high potential for various environmental applications. In this research study, date palm stones derived activated carbon (DPSAC) was used as adsorbent for removing toxic remazol brilliant blue R (RBBR). The synthesis of DPSAC involved a chemical treatment using KOH and NaOH (1:1). Characterization of DPSAC revealed that it exhibited a BET surface area of 715.30 m2/g, Langmuir surface area of 1061.93 m2/g, total pore volume of 0.39 cm3/g, and average pore diameter of 2.15 nm. Adsorption uptake of RBBR increased (from 24.54 to 248.54 mg/g), whereas the removal percentage decreased (from 98.16 to 82.85%) when the initial RBBR concentration increased (from 25 to 300 mg/L). The adsorption process performed best under acidic conditions (pH 3), with an RBBR uptake of 98.33 mg/g. Because of the high R2 values (0.9906 and 0.9779) and low average errors (6.24 and 13.95%), this adsorption process followed the Freundlich isotherm and pseudo-first-order (PFO) models, respectively. The Langmuir adsorption capacity (Qm) was 319.63 mg/g. Thermodynamic parameters were − 11.34 kJ/mol for ∆H° (exothermic in nature), 0.05 kJ/mol K for ∆S° (increasing randomness level at solid–liquid interface), − 27.37 kJ/mol for ∆G° (spontaneous), and 6.84 kJ/mol for Ea (controlled by physisorption)

Bacterial Infections among Patients with Chronic Diseases at a Tertiary Care Hospital in Saudi Arabia

Infections caused by multi-drug-resistant bacteria in patients with chronic diseases have been associated with high mortality and morbidity. While few reports have evaluated bacterial infections in multiple chronic disease patients, the focus of the current study was to investigate the prevalence of bacterial infections and the susceptibility profiles of causative strains among various groups of patients suffering from chronic diseases. Microbiological reports of patients suffering from cancer, diabetes mellitus, cardiovascular diseases, kidney diseases, and skin burns were retrospectively collected from a tertiary hospital in Saudi Arabia. Approximately 54.2% of recruited patients were males, and positive urine was the most prevalent specimen associated with kidney disease patients (25%). Escherichia coli isolates were predominant among cardiovascular, kidney, and cancer patients. Staphylococcus aureus was commonly detected in diabetics and those with burns. Although resistance patterns varied based on the type of specimens and underlying diseases, Escherichia coli showed limited resistance to colistin, carbapenems, and tigecycline, while S. aureus demonstrated susceptibility to ciprofloxacin, gentamicin, and rifampin. These observations are crucial for clinicians and policymakers to ensure effective treatment plans and improve outcomes in these patients with comorbidity

Peroxisome Proliferator-Activated Receptor γ is a Sensitive Target for Oil Sands Process-Affected Water: Effects on Adipogenesis and Identification of Ligands

Identification of toxic components of complex mixtures is a challenge. Here, oil sands process-affected water (OSPW) was used as a case study to identify those toxic components with a known protein target. Organic chemicals in OSPW exhibited dose-dependent activation of peroxisome proliferator-activated receptor γ (PPARγ) at concentrations less than those currently in the environment (0.025× equivalent of full-strength OSPW), by use of a luciferase reporter gene assay. Activation of PPARγ-mediated adipogenesis by OSPW was confirmed in 3T3L1 preadipocytes, as evidenced by accumulation of lipids and up-regulation of <i>AP2</i>, <i>LPL</i>, and <i>PPARγ</i> gene expression after exposure to polar fractions of OSPW. Unexpectedly, the nonpolar fractions of OSPW inhibited differentiation of preadipocytes via activation of the Wnt signaling pathway. Organic chemicals in OSPW that were ligands of PPARγ were identified by use of a pull-down system combined with untargeted chemical analysis (PUCA), with a recombinant PPARγ protein. Thirty ligands of PPARγ were identified by use of the PUCA assay. High resolution MS¹ and MS² spectra were combined to predict the formulas or structures of a subset of ligands, and polyoxygenated or heteroatomic chemicals, especially hydroxylated carboxylic/sulfonic acids, were the major ligands of PPARγ

Identification of Chemicals that Cause Oxidative Stress in Oil Sands Process-Affected Water

Oil sands process-affected water (OSPW) has been reported to cause oxidative stress in organisms, yet the causative agents remain unknown. In this study, a high-throughput in vitro Nrf2 reporter system was used, to determine chemicals in OSPW that cause oxidative stress. Five fractions, with increasing polarity, of the dissolved organic phase of OSPW were generated by use of solid phase extraction cartridges. The greatest response of Nrf2 was elicited by F2 (2.7 ± 0.1-fold), consistent with greater hydroperoxidation of lipids in embryos of Japanese medaka (<i>Oryzias latipes</i>) exposed to F2. Classic naphthenic acids were mainly eluted in F1, and should not be causative chemicals. When F2 was fractionated into 60 subfractions by use of HPLC, significant activation of Nrf2 was observed in three grouped fractions: F2.8 (1.30 ± 0.01-fold), F2.16 (1.34 ± 0.05-fold), and F2.25 (1.28 ± 0.15-fold). 54 compounds were predicted to be potential chemicals causing Nrf2 response, predominated by SO₃⁺ and O₃⁺ species. By use of high-resolution MS² spectra, these SO₃⁺ and O₃⁺ species were identified as hydroxylated aldehydes. This study demonstrated that polyoxygenated chemicals, rather than classic NAs, were the major chemicals responsible for oxidative stress in the aqueous phase of OSPW

Pancreatic Pathological Changes in Murine Toxoplasmosis and Possible Association with Diabetes Mellitus

Background: Previous studies have reported involvement of Toxoplasma gondii (T. gondii) infections in the pathogenesis of some autoimmune diseases, such as polymyositis, rheumatoid arthritis, autoimmune thyroiditis, and Crohn’s disease. However, data on the association between T. gondii infections and Type 1 diabetes mellitus (T1DM) are still controversial. Therefore, in the present study, we aimed to investigate the pancreatic pathological changes in mouse models with acute and chronic toxoplasmosis and their association with T1DM. Materials and Methods: Three groups (10 mice each) of male Swiss Albino mice were used. One group of mice was left uninfected, whereas the second and third groups were infected with the acute virulent T. gondii RH strain and the chronic less virulent Me49 T. gondii strain, respectively. T. gondii-induced pancreatic pathological changes were evaluated by histopathological examination of pancreatic tissues. Moreover, the expression of insulin, levels of caspase-3, and the pancreatic infiltration of CD8+ T cells were evaluated using immunohistochemical staining. Results: Pancreatic tissues of T. gondii-infected animals showed significant pathological alterations and variable degrees of insulitis. Mice with acute toxoplasmosis exhibited marked enlargement and reduced numbers of islets of Langerhans. However, mice with chronic toxoplasmosis showed considerable reduction in size and number of islets of Langerhans. Moreover, insulin staining revealed significant reduction in β cell numbers, whereas caspase-3 staining showed induced apoptosis in islets of Langerhans of acute toxoplasmosis and chronic toxoplasmosis mice compared to uninfected mice. We detected infiltration of CD8+ T cells only in islets of Langerhans of mice with chronic toxoplasmosis. Conclusions: Acute and chronic toxoplasmosis mice displayed marked pancreatic pathological changes with reduced numbers of islets of Langerhans and insulin-producing-β cells. Since damage of β cells of islets of Langerhans is associated with the development of T1DM, our findings may support a link between T. gondii infections and the development of T1DM

The association between tocilizumab therapy and the development of thrombosis in critically ill patients with COVID-19: a multicenter, cohort study

Abstract The use of tocilizumab for the management of COVID-19 emerged since it modulates inflammatory markers by blocking interleukin 6 receptors. Concerns regarding higher thrombosis risk while using tocilizumab were raised in the literature. The aim of this study is to investigate the association between tocilizumab therapy and the development of thromboembolic events in critically ill COVID-19 patients. A propensity score-matched, multicenter cohort study for critically ill adult patients with COVID-19. Eligible patients admitted to ICU between March 2020 and July 2021 were categorized into two sub-cohorts based on tocilizumab use within 24 h of ICU admission. The primary endpoint was to assess the incidence of all thrombosis cases during ICU stay. The secondary endpoints were 30-day mortality, in-hospital mortality, and the highest coagulation parameters follow-up (i.e., D-dimer, Fibrinogen) during the stay. Propensity score matching (1:2 ratio) was based on nine matching covariates. Among a total of 867 eligible patients, 453 patients were matched (1:2 ratio) using propensity scores. The thrombosis events were not statistically different between the two groups in crude analysis (6.8% vs. 7.7%; p-value = 0.71) and regression analysis [OR 0.83, 95% CI (0.385, 1.786)]. Peak D-dimer levels did not change significantly when the patient received tocilizumab (beta coefficient (95% CI): 0.19 (− 0.08, 0.47)), while there was a significant reduction in fibrinogen levels during ICU stay (beta coefficient (95% CI): − 0.15 (− 0.28, − 0.02)). On the other hand, the 30-day and in-hospital mortality were significantly lower in tocilizumab-treated patients (HR 0.57, 95% CI (0.37, 0.87), [HR 0.67, 95% CI (0.46, 0.98), respectively). The use of tocilizumab in critically ill patients with COVID-19 was not associated with higher thrombosis events or peak D-dimer levels. On the other hand, fibrinogen levels, 30-day and in-hospital mortality were significantly lower in the tocilizumab group. Further randomized controlled trials are needed to confirm our findings