Applications of copper slag in the construction sector

Copper slags generated during the primary copper smelting have, due to its favorable mineralogical and chemical composition, several possible end uses in the resource demanding construction sector. Copper slags are made via two different processing methods; slow air cooling or water granulation. Air cooling results in final well crystalline and dense product, which is used usually as coarse aggregates in the building sector, however, water granulation results in a sand-like material with a high quantity of amorphous phase. The present paper gives and overview of the recent reports and good practices in the utilization of these slags, including also some drawbacks and potential issues in a certain type of copper slag, either air cooled or granulated and could serve as a guideline for selecting the most promising applications in the construction sector

Mining waste in circular economy – legislative aspect

One of the common European commitments is a transition towards a green circular economy inwhich waste is not discarded and considered to be just an environmental problem, but should be recognized as animportant potential source of raw materials for industry. In a priority order in waste management activities, introducedby the Waste Directive in 2012, recycling is set just behind the waste prevention and reuse. Many types of waste canbe recycled, the most perspective being construction, industrial and mining wastes. The latter are produced and disposedof at mine sites during the excavation and processing of ore and are extremely perspective due to large quantities andremaining of different metals, however still underutilized, with low recycling rate. Many mining wastes are inert anddo not releases contaminants into environment, however, some of them are problematic and even require monitoring.Reprocessing of these wastes, which include beneficiation and sequential extraction of valuable metals in the first phaseand recycling of residues in both structural and civil engineering in the second phase establishes a zero waste modelwith several benefits for economy, environment and society. Out of the South-East European countries, North Macedonia has great potential to establish this model. As a consequence of long mining tradition and abundant ore resources,there are many mining and metallurgical tailings, on the other hand vivid economy and numerous sinks for use ofrecycled materials in construction sector can accommodate these quantities. However, there are open questions in termsof administrative procedures and legislation. What are those obstacles that accompany the smooth establishment of theproposed model from a legislative point of view? This paper deals with the situation in North Macedonia, in terms ofopportunities, legislative options and the need to adopt new legislation, taking also into account the current problemsin this field in Europe

Environmental and Biological Impact of Fly Ash and Metakaolin-Based Alkali-Activated Foams Obtained at 70°C and Fired at 1,000°C

Alkali-activated foams (AAFs) are inorganic porous materials that can be obtained at temperatures well below 100°C with the use of inorganic wastes as aluminosilicate precursors. In this case, fly ash derived from a Slovenian power plant has been investigated. Despite the environmental benefits per se, due to saving of energy and virgin materials, when using waste materials, it is of extreme importance to also evaluate the potential leaching of heavy metal cations from the alkali-activated foams. This article presents an environmental study of a porous geopolymer derived from this particular fly ash, with respect to the leachability of potentially hazardous elements, its environmental toxicity as determined by biological testing, and the environmental impact of its production. In particular, attention was focused to investigate whether or not 1,000°C-fired alkaliactivated fly ash and metakaolin-based foams, cured at 70°C, are environmentally friendlier options compared to unfired ones, and attempts to explain the rationale of the results were done. Eventually, the firing process at 1,000°C, apart from improving technical performance, could reinforce heavy metal cation entrapment within the aluminosilicate matrix. Since technical performance was also modified by addition of different types of activators (K-based or Na-based), as well as by partial replacement of fly ash with metakaolin, a life cycle assessment (LCA) analysis was performed to quantify the effect of these additions and processes (curing at 70°C and firing at 1,000°C) in terms of global warming potential. Selected samples were also evaluated in terms of leaching of potentially deleterious elements as well as for the immobilization effect of firing. The leaching test indicated that none of the alkali-activated material is classified as hazardous, not even the as-received fly ash as component of new AAF. All of the alkali-activated foams do meet the requirements for an inertness. The highest impact on bacterial colonies was found in samples that did not undergo firing procedures, i.e., those that were cured at 70°C, which induced the reduction of bacterial Enterococcus faecalis viability. The second family of bacteria tested, Escherichia coli, appeared more resistant to the alkaline environment (pH = 10–12) generated by the unfired AAMs. Cell viability recorded the lowest value for unfired alkali-activated materials produced from fly ash and K-based activators. Its reticulation is only partial, with the leachate solution appearing to be characterized with the most alkaline pH and with the highest ionic conductivity, i.e., highest number of soluble ions. By LCA, it has been shown that 1) changing K-based activators to Na-based activators increases environmental impact of the alkali-activated foams by 1%–4% in terms of most of the impact categories (taking into account the production stage). However, in terms of impact on abiotic depletion of elements and impact on ozone layer depletion, the increase is relatively more significant (11% and 18%, respectively); 2) replacing some parts of fly ash with metakaolin also results in relatively higher environmental footprint (increase of around 1%–4%, while the impact on abiotic depletion of elements increases by 14%); and finally, 3) firing at 1,000°C contributes significantly to the environmental footprint of alkaliactivated foams. In such a case, the footprint increases by around one third, compared to the footprint of alkali-activated foams produced at 70°C. A combination of LCA and leaching/toxicity behavior analysis presents relevant combinations, which can provide information about long-term environmental impact of newly developed waste-based materials

Environmental and Biological Impact of Fly Ash and Metakaolin-Based Alkali-Activated Foams Obtained at 70°C and Fired at 1,000°C

Alkali-activated foams (AAFs) are inorganic porous materials that can be obtained attemperatures well below 100°C with the use of inorganic wastes as aluminosilicate precursors. In this case, fly ash derived from a Slovenian power plant has been investigated. Despite the environmental benefits per se, due to saving of energy and virgin materials, when using waste materials, it is of extreme importance to also evaluate the potential leaching of heavy metal cations from the alkali-activated foams. This article presents an environmental study of a porous geopolymer derived from this particular fly ash, with respect to the leachability of potentially hazardous elements, its environmental toxicity as determined by biological testing, and the environmental impact of its production. In particular, attention was focused to investigate whether or not 1,000°C-fired alkaliactivated fly ash and metakaolin-based foams, cured at 70°C, are environmentally friendlier options compared to unfired ones, and attempts to explain the rationale of the results were done. Eventually, the firing process at 1,000°C, apart from improving technical performance, could reinforce heavy metal cation entrapment within the aluminosilicate matrix. Since technical performance was also modified by addition of different types of activators (K-based or Na-based), as well as by partial replacement of fly ash with metakaolin, a life cycle assessment (LCA) analysis was performed to quantify the effect of these additions and processes (curing at 70°C and firing at 1,000°C) in terms of global warming potential. Selected samples were also evaluated in terms of leaching of potentially deleterious elements as well as for the immobilization effect of firing. The leaching test indicated that none of the alkali-activated material is classified as hazardous, not even the as-received fly ash as component of new AAF. All of the alkali-activated foams do meet the requirements for an inertness. The highest impact on bacterial colonies was found in samples that did not undergo firing procedures, i.e., those that were cured at 70°C, which induced the reduction of bacterial Enterococcus faecalis viability. The second family of bacteria tested, Escherichia coli, appeared more resistant to the alkaline environment (pH = 10–12) generated by the unfired AAMs. Cell viability recorded the lowest value for unfired alkali-activated materials produced from fly ash and K-based activators. Its reticulation is only partial, with the leachate solution appearing to be characterized with the most alkaline pH and with the highest ionic conductivity, i.e., highest number of soluble ions. By LCA, it has been shown that 1) changing K-based activators to Na-based activators increases environmental impact of the alkali-activated foams by 1%–4% in terms of most of the impact categories (taking into account the production stage). However, in terms of impact on abiotic depletion of elements and impact on ozone layer depletion, the increase is relatively more significant (11% and 18%, respectively); 2) replacing some parts of fly ash with metakaolin also results in relatively higher environmental footprint (increase of around 1%–4%, while the impact on abiotic depletion of elements increases by 14%); and finally, 3) firing at 1,000°C contributes significantly to the environmental footprint of alkaliactivated foams. In such a case, the footprint increases by around one third, compared to the footprint of alkali-activated foams produced at 70°C. A combination of LCA and leaching/toxicity behavior analysis presents relevant combinations, which can provide information about long-term environmental impact of newly developed waste-based materials

Dinosaur footprints in the Upper Turonian-Coniacian limestone in the Krnica Bay (NE Istria, Croatia)

Three isolated footprints and one trackway that can be attributed to bipedal dinosaur, from a limestone bed in vicinity of Požara promontory, Krnica Bay, are described. According to the stratigraphic position the footprints are late Turonian to Coniacian in age.This is the first record of dinosaur remains in the Turonian-Coniacian and the youngest footprint site on the Adriatic-Dinaric Carbonate Platform described thus far

Mass concrete with EAF steel slag aggregate

Temperature control is the primary concern during the design and construction process of mass concrete structures. As the concrete production has an enormous negative environmental impact, the development of green mass concretes will eventually become as important as the thermal characteristics. Therefore, this paper investigates the use of Electric Arc Furnace (EAF) steel slag aggregate for the partial replacement of the natural aggregate in the production of mass concrete. The impact of EAF steel aggregate on mass concrete workability, strength, and thermal behaviour was analysed. In addition, a cradle-to-gate LCA study was conducted to evaluate the environmental footprint and sustainability potential of the tested mass concrete mixtures. The study results suggest that the use of EAF steel slag aggregate in combination with a low-heat cement with a high content of blast furnace slag can significantly lower the temperature, reduce the environmental impact, and increase the sustainability potential of mass concrete, while at the same time providing sufficient workability and compressive strength. The study results indicate that EAF steel slag can be upcycled into an aggregate for the production of green mass concrete mixtures

Fine particulate matter (PM2.5) exposure assessment among active daily commuters to induce behaviour change to reduce air pollution

Fine particulate matter (PM2.5), a detrimental urban air pollutant primarily emitted by traffic and biomass burning, poses disproportionately significant health risks at relatively limited exposure during commuting. Previous studies have mainly focused on fixed locations when assessing PM2.5 exposure, while neglecting pedestrians and cyclists, who often experience higher pollution levels. In response, this research aimed to independently validate the effectiveness of bicycle-mounted low-cost sensors (LCS) adopted by citizens, evaluate temporal and spatial PM2.5 exposure, and assess associated health risks in Ljubljana, Slovenia. The LCS quality assurance results, verified by co-location field tests by air quality monitoring stations (AQMS), showed comparable outcomes with an average percentage difference of 21.29 %, attributed to humidity-induced nucleation effects. The colder months exhibited the highest air pollution levels (μ = 32.31 μg/m3) due to frequent thermal inversions and weak wind circulation, hindering vertical air mixing and the adequate dispersion of pollutants. Additionally, PM2.5 levels in all sampling periods were lowest in the afternoon (μ = 12.09 μg/m3) and highest during the night (μ = 61.00 μg/m3) when the planetary boundary layer thins, leading to the trapping of pollutants near the surface, thus significantly affecting diurnal and seasonal patterns. Analysis of exposure factors revealed that cyclists were approximately three times more exposed than pedestrians. However, the toxicological risk assessment indicated a minimal potential risk of PM2.5 exposure. The collaborative integration of data from official AQMS and LCS can enhance evidence-based policy-making processes and facilitates the realignment of effective regulatory frameworks to reduce urban air pollution

UV Ink-Jet printability and durability of stone and foil

he use of ultraviolet (UV) printing technology has impacted printing industry in last years due to its applicability on many different »absorptive« as well as »non-absorptive« printing materials. The printability of building materials and recycled foils is relatively unknown. For primary building materials like stones, functionality can be explored with the use of UV printing technology; increased visual, informative effect or even “creative printing” of buildings. Also several aspects of recycled foils reusability as a printing material could be find (printed packaging material or also like secondary building materials). In the present study, printability of the stone and recycled foil and durability of UV prints was explored by means of macroscopically and microscopically characterization. Results indicate that higher print quality can be achieved on polished stone and on coated foil, which surfaces have higher smoothness. Durability of UV prints at freezing is higher at unpolished stone and coated foil that is at materials with the higher surface energy

Porosity of natural stone and use of confocal laser scanning microscopy on calcitic marble aged in laboratory

Porosity is one of the key characteristics of natural stone, which influences ondurability as well as functionality of stone as building material. Further, deterioration processes themselves are also characterized by change of porosity. Different direct and indirect techniques can be used for porosity determination. In the following paper overview of these methods, as well as their advantages and disadvantages, is given. Confocal laser scanning microscopy (CLSM) is indirect (microscopic) technique. Despite its numerous advantages, among which 3D visualizationof pore structure is of major importance, this technique is less known in the area of building materials. An example how CLSM can be applied for qualitative and quantitative evaluation of porosity of calcitic polygonal granoblastic marble is given in this paper. Studied marble has been, despite of its poor durability, often used as building material, especially in the case of claddings. It is shown that thermal hydric factors of deterioration can influence porosity significantly,especially formation of intergranular cracks.This kind of deterioration can be successfully evaluated with use of CLSM method, if samples are suitable prepared and if suitable image analysis tools are developed