LETS get real: constraints on the development of Local Exchange Trading Schemes

Local Exchange Trading Schemes (LETS) are widely promoted as a new tool for local economic development, but until recently the focus has been on their alleged ‘potential’ rather than the realities of their operation. This paper assesses the practical economic role of LETS by examining the amount of trading conducted, and demonstrates that both the volume of trading and the value of the trades are very low. Drawing on an intensive case study of the first UK LETS created explicitly as part of a local authority’s anti-poverty strategy, explanations for the low levels of participation are suggested, and significant structural constraints on the development of LETS are identified

Development of an empirically based dynamic biomechanical strength model

The focus here is on the development of a dynamic strength model for humans. Our model is based on empirical data. The shoulder, elbow, and wrist joints are characterized in terms of maximum isolated torque, position, and velocity in all rotational planes. This information is reduced by a least squares regression technique into a table of single variable second degree polynomial equations determining the torque as a function of position and velocity. The isolated joint torque equations are then used to compute forces resulting from a composite motion, which in this case is a ratchet wrench push and pull operation. What is presented here is a comparison of the computed or predicted results of the model with the actual measured values for the composite motion

The Development of the Wycliffe Bible Translators and the Summer Institute of Linguistics, 1934-1982

This thesis examines the development of one of the twentieth century’s largest North American faith missions, the dual-organizational combination of the Wycliffe Bible Translators (WBT) and the Summer Institute of Linguistics (SIL) from its founding in 1934 to 1982. WBT-SIL grew out of the distinctive vision of its founder, William Cameron Townsend (1896-1982), a former Central American Mission missionary. The extraordinarily inventive Townsend conceived of an approach to Christian mission that construed Bible translation as a linguistic and quasi-scientific enterprise, thereby permitting the non-sectarian SIL side of the organization to collaborate with anticlerical governments in Latin America, where it undertook pioneer Bible translation for indigenous peoples speaking as-yet unwritten languages. This unique government relations and scientific approach to missions was at many points in conflict with the prevailing missionary ethos of the organization’s North American evangelical constituency. Therefore the WBT side of the mission functioned as the religious arm of the enterprise for the purposes of publicity and recruiting. The dual organization drew sharp critique from nearly every quarter, ranging from North American evangelicals to Latin American Catholics to secular anthropologists. The controversial nature of the organization begs the question: Why did WBT-SIL become the largest faith mission of the twentieth century? This study seeks to answer this question by analysing the development WBT-SIL in both its foreign and domestic settings. The principal argument mounted in this thesis is that WBT-SIL met with success because its leaders and members followed Townsend’s lead in pragmatically adapting the organization to widely varying contexts both at home in North America and abroad as it sought to serve indigenous peoples through Bible translation, literacy and education. By striking a creative balance between maintaining the essentials of a traditional faith mission and imaginative breaking with convention when conditions necessitated a progressive approach, WBT-SIL became one of the largest and yet most unusual of twentieth-century evangelical missions

Noise-enabled precision measurements of a Duffing nanomechanical resonator

We report quantitative experimental measurements of the nonlinear response of a radiofrequency mechanical resonator, with very high quality factor, driven by a large swept-frequency force. We directly measure the noise-free transition dynamics between the two basins of attraction that appear in the nonlinear regime, and find good agreement with those predicted by the one-dimensional Duffing equation of motion. We then measure the response of the transition rates to controlled levels of white noise, and extract the activation energy from each basin. The measurements of the noise-induced transitions allow us to obtain precise values for the critical frequencies, the natural resonance frequency, and the cubic nonlinear parameter in the Duffing oscillator, with direct applications to high sensitivity parametric sensors based on these resonators.Comment: 5 pages, 5 figure

Mixing with the radiofrequency single-electron transistor

By configuring a radio-frequency single-electron transistor as a mixer, we demonstrate a unique implementation of this device, that achieves good charge sensitivity with large bandwidth about a tunable center frequency. In our implementation we achieve a measurement bandwidth of 16 MHz, with a tunable center frequency from 0 to 1.2 GHz, demonstrated with the transistor operating at 300 mK. Ultimately this device is limited in center frequency by the RC time of the transistor's center island, which for our device is ~ 1.6 GHz, close to the measured value. The measurement bandwidth is determined by the quality factor of the readout tank circuit.Comment: Submitted to APL september 200

Patient attitudes towards analgesia and their openness to non-pharmacological methods such as acupuncture in the emergency department

Aims: To investigate patient attitudes to analgesia, opioids and non-pharmacological analgesia including acupuncture, in the ED. Methods: ED patients with pain were surveyed regarding: pain scores, satisfaction, addiction concern, non-pharmacological methods of pain relief, and acupuncture. Data were analysed using logistic regression. Results: Of 196 adult patients, 52.8% were ‘very satisfied’ with analgesia. Most patients (84.7%) would accept non-pharmacological methods including acupuncture (68.9%) and 78.6% were not concerned about addiction. Satisfaction was associated with male gender, and ‘adequate analgesia’ but not with opioids. Conclusion: Most patients were generally satisfied with ED analgesia and were open to non-pharmacologic analgesia including acupuncture

Medical student fitness to practise committees at UK medical schools

Abstract Background The aim was to explore the structures for managing student fitness to practise hearings in medical schools in the UK. We surveyed by email the named fitness to practise leads of all full members of the UK Medical Schools Council with a medical undergraduate programme. We asked whether student fitness to practise cases were considered by a committee/panel dedicated to medicine, or by one which also considered other undergraduate health and social care students. Findings All 31 medical schools responded. 19 medical schools had a fitness to practise committee dealing with medical students only. Three had a committee that dealt with students of medicine and dentistry. One had a committee that dealt with students of medicine and veterinary medicine. Eight had a committee that dealt with students of medicine and two or more other programmes, such as dentistry, nursing, midwifery, physiotherapy, dietetics, social work, pharmacy, psychology, audiology, speech therapy, operating department practice, veterinary medicine and education. Conclusion All 31 UK medical schools with undergraduate programmes have a fitness to practise committee to deal with students whose behaviour has given rise to concern about their fitness to practise. The variation in governance structures for student fitness to practise committees/panels can in part be explained by variations in University structures and the extent to which Universities co-manage undergraduate medicine with other courses.</p

Pattern Reduction in Paper Cutting

A large part of the paper industry involves supplying customers with reels of specified width in specifed quantities. These 'customer reels' must be cut from a set of wider 'jumbo reels', in as economical a way as possible. The first priority is to minimize the waste, i.e. to satisfy the customer demands using as few jumbo reels as possible. This is an example of the one-dimensional cutting stock problem, which has an extensive literature. Greycon have developed cutting stock algorithms which they include in their software packages. Greycon's initial presentation to the Study Group posed several questions, which are listed below, along with (partial) answers arising from the work described in this report. (1) Given a minimum-waste solution, what is the minimum number of patterns required? It is shown in Section 2 that even when all the patterns appearing in minimum-waste solutions are known, determining the minimum number of patterns may be hard. It seems unlikely that one can guarantee to find the minimum number of patterns for large classes of realistic problems with only a few seconds on a PC available. (2) Given an n → n-1 algorithm, will it find an optimal solution to the minimum- pattern problem? There are problems for which n → n - 1 reductions are not possible although a more dramatic reduction is. (3) Is there an efficient n → n-1 algorithm? In light of Question 2, Question 3 should perhaps be rephrased as 'Is there an efficient algorithm to reduce n patterns?' However, if an algorithm guaranteed to find some reduction whenever one existed then it could be applied iteratively to minimize the number of patterns, and we have seen this cannot be done easily. (4) Are there efficient 5 → 4 and 4 → 3 algorithms? (5) Is it worthwhile seeking alternatives to greedy heuristics? In response to Questions 4 and 5, we point to the algorithm described in the report, or variants of it. Such approaches seem capable of catching many higher reductions. (6) Is there a way to find solutions with the smallest possible number of single patterns? The Study Group did not investigate methods tailored specifically to this task, but the algorithm proposed here seems to do reasonably well. It will not increase the number of singleton patterns under any circumstances, and when the number of singletons is high there will be many possible moves that tend to eliminate them. (7) Can a solution be found which reduces the number of knife changes? The algorithm will help to reduce the number of necessary knife changes because it works by bringing patterns closer together, even if this does not proceed fully to a pattern reduction. If two patterns are equal across some of the customer widths, the knives for these reels need not be changed when moving from one to the other