18 research outputs found
The Effect of Weather Factors on the Population Density of Oxycarenus spp. (Hemiptera: Lygaidae) on Roselle and Kenaf
Roselle, Hibiscus sabdariffa and Kenaf, Hibiscus cannabinus are two important fibre crops in most parts of Africa. Insect pests are one of the major constraints in the production of these crops. The cotton seed bug Oxycarenus spp. attacks Roselle and Kenaf during the seed formation stage and cause reduction in seed viability. This study examined the effect of weather factors namely, relative humidity, temperature, sunshine and soil evaporation on the population density of Oxycarenus spp. on Roselle and Kenaf during the planting seasons 2012 and 2013. The treatments consisted of two types of Roselle (Green-calyxed and Redcalyxed) and Kenaf. The experiment was laid out in the field using Randomized Complete Block Design and the treatments were replicated four times. The results showed that the population of Oxycarenus spp. was significantly (p<0.05) higher on green-calyxed H. sabdariffa and red-calyxed H. sabdariffa than on Kenaf in 2012 and 2013. The differences in the density of the bug per fruit on green-calyxed H. sabdariffa and redcalyxed H. sabdariffa were significant in the two planting seasons. Relative humidity in the morning and maximum temperature correlated positively and negatively, respectively with the density of Oxycarenus spp. during the two planting seasons. Sunshine hours per day correlated positively, while soil temperature and soil evaporation had a negative correlation with the bug density. This information on the seasonal variation in the bug density and its relationship with weather factors could be used in pest forecasting for these fibre crops which is an important tool in formulating a successful pest management programme.Keywords: Malvaceae, Fibre crops, weather factors, Oxycarenus spp., pest management, planting seasons, pest density
INFLUENCE OF CATALYST QUANTITY AND REACTION TIME ON IN-SITU PRODUCTION OF BIODIESEL FROM RAW CASTOR BEAN SEED USING RESPONSE SURFACE METHODOLOGY
Trans-esterification is the most commonly used methods of biodiesel production. In-situ trans-esterification process uses oil (triglycerides) in seeds directly without the need for initial extraction. The in-situ production of biodiesel from raw castor bean seed with a batch processor was studied at initial catalyst quantity of 0.1, 0.5 and 1.5%, reaction time of 30, 60 and 90 min with a reaction temperature of 600C and alcohol seed ratio of 1:1 using the response surface methodology. Initial catalyst concentration and reaction time were subjected to central composite experimental design of the response surface methodology. Initial catalyst quantity and reaction time were found to have significant (P<0.05) effects on the yield of castor biodiesel produced, with increased catalyst quantity giving a negative effect on the yield after an initial amount of between 1.0 and 1.2%. The reaction time had a positive effect on the yield until after 90 minutes after which biodiesel yield reduced with increased time. The CA-Time interactions influence was small and negative, due to the superior effect of initial catalyst quantity by the formation of by-products (soaps) leading to difficult ester separation from glycerol. A second-order model was obtained to predict the yield as a function of all factors. The model predicted well the observed data with a R2 value of 0.983. The biodiesel produced had properties comparable to the standards of ASTM while the specific gravity was higher than the specified standards
EFFECT OF TEMPERATURE AND PERCENTAGE OF INITIAL CATALYST ON THE IN-SITU PRODUCTION OF BIO-DIESEL FROM CASTOR OIL BEAN SEED USING RESPONSE SURFACE METHODOLOGY
The use of vegetable oil and animal fats for biodiesel production has recently become a great concern because of the competition with food materials. As the demand for vegetable oil increase tremendously in recent years it has become impossible to justify the use of these oils for fuel production. In-situ trans-esterification process uses the oil (triglycerides) in the oil seed directly without the need for initial extraction as compared with the conventional trans-esterification. Castor oil bean seed contains between 35 and 55% oil and does not compete with food grade oil because of the seed’s toxicity. This study evaluated the effect of temperature and percentage of initial catalyst on yield of castor ethyl ester. Raw castor oil bean seed kernel at moisture content of 4.68 % (db) was subjected to in-situ trans-esterification in a batch processor with ethanol as the solvent and sodium hydroxide as the catalyst. Central composite design (CCD) of the Response surface methodology was applied to evaluate the main and interactive effects of initial catalyst amount (0.5 – 1.5%) and reaction temperature (40 – 70OC), on yield of castor ethyl-ester, at reaction time of 120 minutes and alcohol-seed weight ratio of 1:1. A quadratic non-linear polynomial model was obtained to describe the effect of the factors on yield. The model was significant (P< 0.05) with a non- significant Lack-of-Fit value (P< 0.05) and R2 value of 0.944. Second order response surfaces and contour plots obtained from the model revealed that initial catalyst amount was the more effective factors on yield while reaction temperature had less effect. The Temperature–percentage of initial catalyst interaction was small and negative, due to the combined effects of formation of by-products (soaps) and saponification. The biodiesel produced from ground castor oil bean seed during this study met the requirements of ASTM standard D6751-02 but specific gravity was higher than the ASTM standard confirming that biodiesel produced from castor bean seed using the in-situ technique can be used as replacement fuel for fossil diesel
Optimization of in-situ Biodiesel Production from Raw Castor Oil-Bean Seed
Optimization of in-situ biodiesel production from raw castor oil-bean seed was carried out from raw castor bean oil seed (37.9% oil content) by alkaline catalyzed in-situ trans-esterification with Sodium hydroxide as catalyst and ethanol as the solvent in a laboratory batch processor. Response surface methodology and central composite experimental design was applied to evaluate effects of reaction time (30 -120 min), alcohol/seed weight ratio (0.5 – 2.0), Catalyst amount (0.3 – 1.5%) and reaction temperature (40 – 70OC). Catalyst amount, reaction temperature and time all had significant main effects (p < 0.05) while Alcohol-seed ratio had only slight effects on yield of castor biodiesel as a main effect but was significantly involved in interactions with other factors. A modified statistical model comprised of all significant factors and interactions (p < 0.05) obtained by multiple regressions predicted that the highest yield of castor ethyl-ester was 99.5% of expressible oil at the following optimized reaction values; alcohol/seed weight ratio of 0.5, a catalyst./seed weight ratio of 1.31, reaction temperature of 60.33oC, and reaction time of 81.7minutes. A Taguchi L9(3^4) optimization experimental design used to confirm the modified model at optimum point and two other points within experimental region produced yield that was significantly comparable to model predictions at 95% confidence level using a paired t-test. Measured properties of the castor ethyl-ester such as viscosity(5.78mm2/s), pour point (-21.5 oC), flash point (177.12 oC), calorific value (47.76MJ/kg), acid value (0.34 mg KOH/g) and cetane number (48.73) were within the ASTM standard D6751-02 but specific gravity. Keywords: Castor oil-bean seed, biodiesel, in-situ trans-esterification, response surface methodology, optimization, Castor ethyl-este
Physicochemical, microbial, and aflatoxin analyses of selected high-quality cassava flour (HQCF) from the major markets of Zambia
Open Access Journal; Published online: 13 May 2021Various quality grades of high-quality cassava flour (HQCF) are found in markets due to the rapid increase in its utilization for product development. Therefore, this study assessed the chemical, functional and pasting properties and the microbial and aflatoxin content of HQCF being sold in Lusaka markets. Nine samples of HQCF (coded CM 01 to 09) were collected from supermarkets, one major open market, and one cassava processing centre. The samples were analyzed for chemical, functional and pasting properties and the microbial and aflatoxin content using standard laboratory methods. Samples CM 01, CM 08, and CM 09 had starch content above 60%, while CM 02 to CM 07 had starch slightly above 40%. The mean value of bulk density (BD) was 0.51 ± 25.49 g ml−1, dispersibility 68 ± 2.63%, swelling power (SP) 7.84 ± 0.76%, solubility index 135.80 ± 18.8%, and water absorption capacity (WAC) 6.28 ± 32.49%. The mean value for the peak viscosity was 437.46 ± 94.12 RVU, trough viscosity 217.55 ± 27.41 RVU, breakdown viscosity 219.91 ± 77.94 RVU, final viscosity 284.31 ± 29.96 RVU, and setback viscosity 66.77 ± 5.30 RVU. There was no detection of aflatoxins B1, B2, G1, and G2, especially aflatoxin B1 (AFB1) that belongs to group 1 carcinogens for humans. Bacteria colony counts in samples CM 02, CM 03, CM 07, and CM 09 were higher with CFU mg−1 of 2,280,000, 260,000, 200,000, and 510,000, respectively. The study’s information will guide the quality standard specifications, breeding programs, and end-use of HQCF
Food quality profile of pounded yam and implications for yam breeding
Open Access ArticleBACKGROUND
Assessment of the key preferred quality traits in pounded yam, a popularly consumed yam food product in West Africa, is often done through sensory evaluation. Such assessment is time-consuming and results may be biased. Therefore, there is a need to develop objective, high-throughput methods to predict the quality of consumer-preferred traits in pounded yam. This study focused on how key quality traits in pounded yam proposed to yam breeders were determined, measured by biophysical and biochemical methods, in order to shorten the breeding selection cycle through adoption of these methods by breeders.
RESULTS
Consumer tests and sensory quantitative descriptive analysis (QDA) validated that preferred priority quality traits in pounded yam were related to textural quality (smooth, stretchable, moldable, slightly sticky and moderately hard) and color (white, cream or light yellow). There were significant correlations between sensory textural quality attributes cohesiveness/moldability, hardness, and adhesiveness/stickiness, with textural quality measurements from instrumental texture profile analysis (TPA). Color measurement parameters (L*, a*, and b*) with chromameter agreed with that of sensory evaluation and can replace the sensory panel approach. The smoothness (R2 = 1.00), stickiness (R2 = 1.00), stretchability (R2 = 1.00), hardness (R2 = 0.99), and moldability (R2 = 0.53) of pounded yam samples can be predicted by the starch, amylose, and protein contents of yam tubers estimated by near-infrared spectroscopy.
CONCLUSION
TPA and Hunter colorimeter can be used as medium-high throughput methods to evaluate the textural quality and color of pounded yam in place of the sensory panelists
Vitamin A-biofortified maize: exploiting native genetic variation for nutrient enrichment.
bitstream/item/190670/1/Vitamin-A-Science-Brief.pd