Design and Techno-economic assessment of a new hybrid system of a solar dish Stirling engine instegrated with a horizontal axis wind turbine for microgrid power generation

The increasing interest in renewable microgrids have motivated the exploration of more sustainable alternatives to traditional energy supply. In this study, a novel hybrid renewable energy-based microgrid power system is proposed, designed and techno-economically assessed. The system consists of a concentrated parabolic solar dish Stirling engine and a horizontal axis wind turbine integrated with a battery bank. The novelty of the study lies in replacing conventional hybrid systems, such as a typical photovoltaic/wind assembly, with a novel solar dish/wind turbine system that has the potential to achieve higher efficiencies and financial competitiveness. The solar dish Stirling engine serves as the primary source of electrical power generation while the horizontal axis wind turbine, in conjunction with a battery bank, supplies backup electricity when the primary source of power is unavailable. The system has been designed through advanced modelling in the MATLAB/ Simulink® environment that efficiently integrates the individual energy technologies. A technical sensitivity analysis has been performed for all the units in order to reduce the respective design limits and identify optimum operational windows. Further, the performance of the model has been tested at two locations in Jordan, and a thorough techno-economic analysis of the integrated system has been conducted. The simulation results show that at the optimal design point the efficiency of the Stirling engine is 37% with a net output power of 1500 kWe. For the horizontal axis wind turbine, a module of 100 kWe with a power coefficient of 0.2–0.24 is suitable for operation in terms of cost, power, torque and farm size. Also, two economic indicators, namely, the levelised cost of electricity and hourly cost, have been calculated. The levelised cost of electricity lies between 0.13 and 0.15 $/kWh while the hourly cost is found to be around 4$/h. Thus, the economic evaluation revealed that the proposed system is very competitive with other integrated renewable energy technologies

Efficient and Stable Routing Algorithm Based on User Mobility and Node Density in Urban Vehicular Network

Vehicular ad hoc networks (VANETs) are considered an emerging technology in the industrial and educational fields. This technology is essential in the deployment of the intelligent transportation system, which is targeted to improve safety and efficiency of traffic. The implementation of VANETs can be effectively executed by transmitting data among vehicles with the use of multiple hops. However, the intrinsic characteristics of VANETs, such as its dynamic network topology and intermittent connectivity, limit data delivery. One particular challenge of this network is the possibility that the contributing node may only remain in the network for a limited time. Hence, to prevent data loss from that node, the information must reach the destination node via multi-hop routing techniques. An appropriate, efficient, and stable routing algorithm must be developed for various VANET applications to address the issues of dynamic topology and intermittent connectivity. Therefore, this paper proposes a novel routing algorithm called efficient and stable routing algorithm based on user mobility and node density (ESRA-MD). The proposed algorithm can adapt to significant changes that may occur in the urban vehicular environment. This algorithm works by selecting an optimal route on the basis of hop count and link duration for delivering data from source to destination, thereby satisfying various quality of service considerations. The validity of the proposed algorithm is investigated by its comparison with ARP-QD protocol, which works on the mechanism of optimal route finding in VANETs in urban environments. Simulation results reveal that the proposed ESRA-MD algorithm shows remarkable improvement in terms of delivery ratio, delivery delay, and communication overhead

Tea and coffee consumption in relation to vitamin D and calcium levels in Saudi adolescents

Background Coffee and tea consumption was hypothesized to interact with variants of vitamin D-receptor polymorphisms, but limited evidence exists. Here we determine for the first time whether increased coffee and tea consumption affects circulating levels of 25-hydroxyvitamin D in a cohort of Saudi adolescents. Methods A total of 330 randomly selected Saudi adolescents were included. Anthropometrics were recorded and fasting blood samples were analyzed for routine analysis of fasting glucose, lipid levels, calcium, albumin and phosphorous. Frequency of coffee and tea intake was noted. 25-hydroxyvitamin D levels were measured using enzyme-linked immunosorbent assays. Results Improved lipid profiles were observed in both boys and girls, as demonstrated by increased levels of HDL-cholesterol, even after controlling for age and BMI, among those consuming 9–12 cups of coffee/week. Vitamin D levels were significantly highest among those consuming 9–12 cups of tea/week in all subjects (p-value 0.009) independent of age, gender, BMI, physical activity and sun exposure. Conclusion This study suggests a link between tea consumption and vitamin D levels in a cohort of Saudi adolescents, independent of age, BMI, gender, physical activity and sun exposure. These findings should be confirmed prospectively

Diabetes mellitus type 2 and other chronic non-communicable diseases in the central region, Saudi Arabia (riyadh cohort 2): a decade of an epidemic

<p>Abstract</p> <p>Background</p> <p>Follow-up epidemiologic studies are needed to assess trends and patterns of disease spread. No follow-up epidemiologic study has been done in the Kingdom of Saudi Arabia to assess the current prevalence of major chronic, noncommunicable diseases, specifically in the urban region, where modifiable risk factors remain rampant. This study aims to fill this gap.</p> <p>Methods</p> <p>A total of 9,149 adult Saudis ages seven to eighty years (5,357 males (58.6%) and 3,792 females (41.4%)) were randomly selected from the Riyadh Cohort Study for inclusion. Diagnosis of type 2 diabetes mellitus (DMT2) and obesity were based on the World Health Organization definitions. Diagnoses of hypertension and coronary artery disease (CAD) were based on the Seventh Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure and American Heart Association criteria, respectively.</p> <p>Results</p> <p>The overall crude prevalence of DMT2 was 23.1% (95% confidence interval (95% CI) 20.47 to 22.15). The age-adjusted prevalence of DMT2 was 31.6%. DMT2 prevalence was significantly higher in males, with an overall age-adjusted prevalence of 34.7% (95% CI 32.6 to 35.4), than in females, who had an overall age-adjusted prevalence of 28.6% (95% CI 26.7 to 29.3) (<it>P </it>< 0.001). The overall crude prevalence of obesity was 31.1% (95% CI 30.1 to 32.0). The age-adjusted prevalence of obesity was 40.0%. The prevalence of obesity was higher in females, with an overall prevalence of 36.5% (95% CI 35.1 to 37.83), than in males (25.1% (95% CI 23.7 to 26.3)) (<it>P </it>< 0.001). The age-adjusted prevalence of hypertension and CAD were 32.6% (95% CI 31.7 to 33.6) and 6.9% (95% CI 6.4 to 7.4), respectively.</p> <p>Conclusion</p> <p>Comparisons of our findings with earlier data show that the prevalence of DMT2, hypertension and CAD in Riyadh, Saudi Arabia, has alarmingly worsened. Aggressive promotion of public awareness, continued screening and early intervention are pivotal to boosting a positive response.</p

Increased circulating ANG II and TNF-α represents important risk factors in obese Saudi adults with hypertension irrespective of diabetic status and BMI

Central adiposity is a significant determinant of obesity-related hypertension risk, which may arise due to the pathogenic inflammatory nature of the abdominal fat depot. However, the influence of pro-inflammatory adipokines on blood pressure in the obese hypertensive phenotype has not been well established in Saudi subjects. As such, our study investigated whether inflammatory factors may represent useful biomarkers to delineate hypertension risk in a Saudi cohort with and without hypertension and/or diabetes mellitus type 2 (DMT2). Subjects were subdivided into four groups: healthy lean controls (age: 47.9±5.1 yr; BMI: 22.9±2.1 Kg/m2), non-hypertensive obese (age: 46.1±5.0 yr; BMI: 33.7±4.2 Kg/m2), hypertensive obese (age: 48.6±6.1 yr; BMI: 36.5±7.7 Kg/m2) and hypertensive obese with DMT2 (age: 50.8±6.0 yr; BMI: 35.3±6.7 Kg/m2). Anthropometric data were collected from all subjects and fasting blood samples were utilized for biochemical analysis. Serum angiotensin II (ANG II) levels were elevated in hypertensive obese (p<0.05) and hypertensive obese with DMT2 (p<0.001) compared with normotensive controls. Systolic blood pressure was positively associated with BMI (p<0.001), glucose (p<0.001), insulin (p<0.05), HOMA-IR (p<0.001), leptin (p<0.01), TNF-α (p<0.001) and ANG II (p<0.05). Associations between ANG II and TNF-α with systolic blood pressure remained significant after controlling for BMI. Additionally CRP (p<0.05), leptin (p<0.001) and leptin/adiponectin ratio (p<0.001) were also significantly associated with the hypertension phenotype. In conclusion our data suggests that circulating pro-inflammatory adipokines, particularly ANG II and, TNF-α, represent important factors associated with a hypertension phenotype and may directly contribute to predicting and exacerbating hypertension risk

PAHs in Household Floor Dust Collected in Amman, Jordan

Peer reviewe

Percent atheroma volume: Optimal variable to report whole-heart atherosclerotic plaque burden with coronary CTA, the PARADIGM study.

BACKGROUND AND AIMS:Different methodologies to report whole-heart atherosclerotic plaque on coronary computed tomography angiography (CCTA) have been utilized. We examined which of the three commonly used plaque burden definitions was least affected by differences in body surface area (BSA) and sex. METHODS:The PARADIGM study includes symptomatic patients with suspected coronary atherosclerosis who underwent serial CCTA &gt;2 years apart. Coronary lumen, vessel, and plaque were quantified from the coronary tree on a 0.5 mm cross-sectional basis by a core-lab, and summed to per-patient. Three quantitative methods of plaque burden were employed: (1) total plaque volume (PV) in mm3, (2) percent atheroma volume (PAV) in % [which equaled: PV/vessel volume * 100%], and (3) normalized total atheroma volume (TAVnorm) in mm3 [which equaled: PV/vessel length * mean population vessel length]. Only data from the baseline CCTA were used. PV, PAV, and TAVnorm were compared between patients in the top quartile of BSA vs the remaining, and between sexes. Associations between vessel volume, BSA, and the three plaque burden methodologies were assessed. RESULTS:The study population comprised 1479 patients (age 60.7 ± 9.3 years, 58.4% male) who underwent CCTA. A total of 17,649 coronary artery segments were evaluated with a median of 12 (IQR 11-13) segments per-patient (from a 16-segment coronary tree). Patients with a large BSA (top quartile), compared with the remaining patients, had a larger PV and TAVnorm, but similar PAV. The relation between larger BSA and larger absolute plaque volume (PV and TAVnorm) was mediated by the coronary vessel volume. Independent from the atherosclerotic cardiovascular disease risk (ASCVD) score, vessel volume correlated with PV (P &lt; 0.001), and TAVnorm (P = 0.003), but not with PAV (P = 0.201). The three plaque burden methods were equally affected by sex. CONCLUSIONS:PAV was less affected by patient's body surface area then PV and TAVnorm and may be the preferred method to report coronary atherosclerotic burden