Provably secure and efficient audio compression based on compressive sensing

The advancement of systems with the capacity to compress audio signals and simultaneously secure is a highly attractive research subject. This is because of the need to enhance storage usage and speed up the transmission of data, as well as securing the transmission of sensitive signals over limited and insecure communication channels. Thus, many researchers have studied and produced different systems, either to compress or encrypt audio data using different algorithms and methods, all of which suffer from certain issues including high time consumption or complex calculations. This paper proposes a compressing sensing-based system that compresses audio signals and simultaneously provides an encryption system. The audio signal is segmented into small matrices of samples and then multiplied by a non-square sensing matrix generated by a Gaussian random generator. The reconstruction process is carried out by solving a linear system using the pseudoinverse of Moore-Penrose. The statistical analysis results obtaining from implementing different types and sizes of audio signals prove that the proposed system succeeds in compressing the audio signals with a ratio reaching 28% of real size and reconstructing the signal with a correlation metric between 0.98 and 0.99. It also scores very good results in the normalized mean square error (MSE), peak signal-to-noise ratio metrics (PSNR), and the structural similarity index (SSIM), as well as giving the signal a high level of security

Design and implementation of a centralized approach for multi-node localization

In this paper, a centralized approach for multi nodes localization is introduced. This approach is based on using a beacon fixed at the lower middle edge of the environment. This beacon is provided with a distance sensor and can scan the environment to measure the distance between the detecting node and the beacon. Also, remote control is fixed on the beacon to distinguish the identity of the detecting node. Two nodes are used in this approach, each node contains eight cells, and each cell has a 5 mm IR transmitter and TSOP4P38 IR receiver. If any one of the IR receivers has received the beacon ID, the transmitter which belongs to the same cell will respond by sending the node ID to the beacon. The beacon measurements and the information received from the detected nodes are then used to estimate the location and orientation of the visible nodes and the results will be saved in the main computer. Several experimental results have been tested with different distances from the nodes to the beacon. Also, different rotation angles at the beacon have been experienced to analyze the performance of the introduced approach

Lightweight, Secure, Similar-Document Retrieval over Encrypted Data

Applications for document similarity detection are widespread in diverse communities, including institutions and corporations. However, currently available detection systems fail to take into account the private nature of material or documents that have been outsourced to remote servers. None of the existing solutions can be described as lightweight techniques that are compatible with lightweight client implementation, and this deficiency can limit the effectiveness of these systems. For instance, the discovery of similarity between two conferences or journals must maintain the privacy of the submitted papers in a lightweight manner to ensure that the security and application requirements for limited-resource devices are fulfilled. This paper considers the problem of lightweight similarity detection between document sets while preserving the privacy of the material. The proposed solution permits documents to be compared without disclosing the content to untrusted servers. The fingerprint set for each document is determined in an efficient manner, also developing an inverted index that uses the whole set of fingerprints. Before being uploaded to the untrusted server, this index is secured by the Paillier cryptosystem. This study develops a secure, yet efficient method for scalable encrypted document comparison. To evaluate the computational performance of this method, this paper carries out several comparative assessments against other major approaches

Lightweight, Secure, Similar-Document Retrieval over Encrypted Data

Applications for document similarity detection are widespread in diverse communities, including institutions and corporations. However, currently available detection systems fail to take into account the private nature of material or documents that have been outsourced to remote servers. None of the existing solutions can be described as lightweight techniques that are compatible with lightweight client implementation, and this deficiency can limit the effectiveness of these systems. For instance, the discovery of similarity between two conferences or journals must maintain the privacy of the submitted papers in a lightweight manner to ensure that the security and application requirements for limited-resource devices are fulfilled. This paper considers the problem of lightweight similarity detection between document sets while preserving the privacy of the material. The proposed solution permits documents to be compared without disclosing the content to untrusted servers. The fingerprint set for each document is determined in an efficient manner, also developing an inverted index that uses the whole set of fingerprints. Before being uploaded to the untrusted server, this index is secured by the Paillier cryptosystem. This study develops a secure, yet efficient method for scalable encrypted document comparison. To evaluate the computational performance of this method, this paper carries out several comparative assessments against other major approaches

A Lightweight Hybrid Scheme for Hiding Text Messages in Colour Images Using LSB, Lah Transform and Chaotic Techniques

Data security can involve embedding hidden images, text, audio, or video files within other media to prevent hackers from stealing encrypted data. Existing mechanisms suffer from a high risk of security breaches or large computational costs, however. The method proposed in this work incorporates low-complexity encryption and steganography mechanisms to enhance security during transmission while lowering computational complexity. In message encryption, it is recommended that text file data slicing in binary representation, to achieve different lengths of string, be conducted before text file data masking based on the lightweight Lucas series and mod function to ensure the retrieval of text messages is impossible. The steganography algorithm starts by generating a random key stream using a hybrid of two low-complexity chaotic maps, the Tent map and the Ikeda map. By finding a position vector parallel to the input image vector, these keys are used based on the previously generated position vector to randomly select input image data and create four vectors that can be later used as input for the Lah transform. In this paper, we present an approach for hiding encrypted text files using LSB colour image steganography by applying a low-complexity XOR operation to the most significant bits in 24-bit colour cover images. It is necessary to perform inverse Lah transformation to recover the image pixels and ensure that invisible data cannot be retrieved in a particular sequence. Evaluation of the quality of the resulting stego-images and comparison with other ways of performing encryption and message concealment shows that the stego-image has a higher PSNR, a lower MSE, and an SSIM value close to one, illustrating the suitability of the proposed method. It is also considered lightweight in terms of having lower computational overhead

Session-Dependent Token-Based Payload Enciphering Scheme for Integrity Enhancements in Wireless Networks

Wireless networks have continued to evolve to offer connectivity between users and smart devices such as drones and wireless sensor nodes. In this environment, insecure public channels are deployed to link the users to their remote smart devices. Some of the application areas of these smart devices include military surveillance and healthcare monitoring. Since the data collected and transmitted to the users are highly sensitive and private, any leakages can have adverse effects. As such, strong entity authentication should be implemented before any access is granted in these wireless networks. Although numerous protocols have been developed for this purpose, the simultaneous attainment of robust security and privacy at low latencies, execution time and bandwidth remains a mirage. In this paper, a session-dependent token-based payload enciphering scheme for integrity enhancements in wireless networks is presented. This protocol amalgamates fuzzy extraction with extended Chebyshev chaotic maps to boost the integrity of the exchanged payload. The security analysis shows that this scheme offers entity anonymity and backward and forward key secrecy. In addition, it is demonstrated to be robust against secret ephemeral leakage, side-channeling, man-in-the-middle and impersonation attacks, among other security threats. From the performance perspective, the proposed scheme requires the least communication overheads and a relatively low execution time during the authentication process

Lightweight Secure Message Delivery for E2E S2S Communication in the IoT-Cloud System

The continuous increase in the use of smart devices and the need for E2E smart2smart (S2S) services in IoT systems play effective and contemporary roles in the field of communication, and a large amount of resources is required. Thus, IoTs and cloud computing must be integrated. One of the results of this integration is the increase in the number of attacks and vulnerabilities in the E2E S2S message delivery service of such an IoT-cloud system. However, none of the traditional security solutions can be sufficiently regarded as a secure and lightweight mechanism for ensuring that the security requirements for E2E S2S message transmission in the IoT-cloud system are fulfilled. This work aims to provide an efficient and secure, lightweight E2E S2S message delivery function, which includes the E2E S2S secure key and biometric parameter exchange function, a bio-shared parameter and bio-key generation function, secure lightweight E2E S2S communication negotiation and secure E2E S2S lightweight message delivery. The secure, lightweight cryptographic communication procedure is negotiated between a pair of smart devices during each E2E session to minimize the power consumption required of limited-energy devices. Such a negotiation process prevents known attacks by providing responsive mutual authentication. Lightweight message delivery by the two smart devices can satisfy the basic security requirements of E2E communication and ensure that the computational cost required for a real-time system is as low as possible

BAN logic notations.

The incorporation of information and communication technologies in the power grids has greatly enhanced efficiency in the management of demand-responses. In addition, smart grids have seen considerable minimization in energy consumption and enhancement in power supply quality. However, the transmission of control and consumption information over open public communication channels renders the transmitted messages vulnerable to numerous security and privacy violations. Although many authentication and key agreement protocols have been developed to counter these issues, the achievement of ideal security and privacy levels at optimal performance still remains an uphill task. In this paper, we leverage on Hamming distance, elliptic curve cryptography, smart cards and biometrics to develop an authentication protocol. It is formally analyzed using the Burrows-Abadi-Needham (BAN) logic, which shows strong mutual authentication and session key negotiation. Its semantic security analysis demonstrates its robustness under all the assumptions of the Dolev-Yao (DY) and Canetti- Krawczyk (CK) threat models. From the performance perspective, it is shown to incur communication, storage and computation complexities compared with other related state of the art protocols.</div

System initialization and registration phases.

The incorporation of information and communication technologies in the power grids has greatly enhanced efficiency in the management of demand-responses. In addition, smart grids have seen considerable minimization in energy consumption and enhancement in power supply quality. However, the transmission of control and consumption information over open public communication channels renders the transmitted messages vulnerable to numerous security and privacy violations. Although many authentication and key agreement protocols have been developed to counter these issues, the achievement of ideal security and privacy levels at optimal performance still remains an uphill task. In this paper, we leverage on Hamming distance, elliptic curve cryptography, smart cards and biometrics to develop an authentication protocol. It is formally analyzed using the Burrows-Abadi-Needham (BAN) logic, which shows strong mutual authentication and session key negotiation. Its semantic security analysis demonstrates its robustness under all the assumptions of the Dolev-Yao (DY) and Canetti- Krawczyk (CK) threat models. From the performance perspective, it is shown to incur communication, storage and computation complexities compared with other related state of the art protocols.</div

Deployed symbols.

The incorporation of information and communication technologies in the power grids has greatly enhanced efficiency in the management of demand-responses. In addition, smart grids have seen considerable minimization in energy consumption and enhancement in power supply quality. However, the transmission of control and consumption information over open public communication channels renders the transmitted messages vulnerable to numerous security and privacy violations. Although many authentication and key agreement protocols have been developed to counter these issues, the achievement of ideal security and privacy levels at optimal performance still remains an uphill task. In this paper, we leverage on Hamming distance, elliptic curve cryptography, smart cards and biometrics to develop an authentication protocol. It is formally analyzed using the Burrows-Abadi-Needham (BAN) logic, which shows strong mutual authentication and session key negotiation. Its semantic security analysis demonstrates its robustness under all the assumptions of the Dolev-Yao (DY) and Canetti- Krawczyk (CK) threat models. From the performance perspective, it is shown to incur communication, storage and computation complexities compared with other related state of the art protocols.</div