Enhanced production of subtilisin of Pyrococcus furiosus expressed in Escherichia coli using autoinducing medium

A subtilisin gene identified in the reported genome sequence of Pyrococcus furiosus was amplified and inserted in pET-22b(+) vector to produce the recombinant plasmid pET-SB. Escherichia coli BL-21 (DE3)CodonPlus was transformed with this plasmid and the enzyme was expressed up to 30% of the total cell protein on induction with IPTG. The expressed protein appeared at a position corresponding to ~20 kDaon SDS-PAGE as compared to theoretical molecular mass of 17.6 kDa. This aberrant electrophoresis mobility could be due to specific amino acid composition of the protein. Auto-induction with lactose also produced a similar level of expression but the total amount of the enzyme produced was 2.4 foldgreater than that when produced with IPTG induction. This was due to a higher cell density obtainable in the auto-inducing medium. The enzyme expressed in the insoluble state could be partially refolded after denaturation with urea at high pH. This study reports for the first time high-level expression ofsubtilisin of P. furiosus in E. coli using an auto-inducing medium

New approaches to achieving hemostasis after venous access in cardiovascular patients

Recent decades have seen a series of advances in percutaneous transvenous procedures for cardiac arrhythmias, including the implantation of leadless pacemakers. Many of these procedures require the insertion of large caliber sheaths in large veins, usually the femoral vein. Securing hemostasis efficiently and reliably at the access site is a key step to improving a procedure’s safety profile. Traditionally, hemostasis was achieved by manual compression to venous access sites, but the trend toward larger sheaths and the increased use of uninterrupted anticoagulation has strained the limits of this method. Achieving hemostasis by compression alone in these circumstances requires more attention and a longer duration, leading to greater patient discomfort and prolonged immobility. In turn, manual compression may be more time-consuming for medical professionals and increase occupied hospital beds. New approaches have been developed to facilitate early ambulation, decrease patient discomfort, and address the risk of access site complications. These approaches include vascular closure devices and subcutaneous suture techniques including figure-of-eight and purse-string sutures. This article reviews the new approaches applied to achieve venous access site hemostasis in patients undergoing transvenous procedures for cardiac arrhythmias

In Vivo Analysis of MEF2 Transcription Factors in Synapse Regulation and Neuronal Survival

MEF2 (A–D) transcription factors govern development, differentiation and maintenance of various cell types including neurons. The role of MEF2 isoforms in the brain has been studied using in vitro manipulations with only MEF2C examined in vivo. In order to understand specific as well as redundant roles of the MEF2 isoforms, we generated brain-specific deletion of MEF2A and found that Mef2aKO mice show normal behavior in a range of paradigms including learning and memory. We next generated Mef2a and Mef2d brain-specific double KO (Mef2a/dDKO) mice and observed deficits in motor coordination and enhanced hippocampal short-term synaptic plasticity, however there were no alterations in learning and memory, Schaffer collateral pathway long-term potentiation, or the number of dendritic spines. Since previous work has established a critical role for MEF2C in hippocampal plasticity, we generated a Mef2a, Mef2c and Mef2d brain-specific triple KO (Mef2a/c/dTKO). Mef2a/c/d TKO mice have early postnatal lethality with increased neuronal apoptosis, indicative of a redundant role for the MEF2 factors in neuronal survival. We examined synaptic plasticity in the intact neurons in the Mef2a/c/d TKO mice and found significant impairments in short-term synaptic plasticity suggesting that MEF2C is the major isoform involved in hippocampal synaptic function. Collectively, these data highlight the key in vivo role of MEF2C isoform in the brain and suggest that MEF2A and MEF2D have only subtle roles in regulating hippocampal synaptic function

High-Yield Expression of Heterologous [FeFe] Hydrogenases in Escherichia coli

BACKGROUND: The realization of hydrogenase-based technologies for renewable H(2) production is presently limited by the need for scalable and high-yielding methods to supply active hydrogenases and their required maturases. PRINCIPAL FINDINGS: In this report, we describe an improved Escherichia coli-based expression system capable of producing 8-30 mg of purified, active [FeFe] hydrogenase per liter of culture, volumetric yields at least 10-fold greater than previously reported. Specifically, we overcame two problems associated with other in vivo production methods: low protein yields and ineffective hydrogenase maturation. The addition of glucose to the growth medium enhances anaerobic metabolism and growth during hydrogenase expression, which substantially increases total yields. Also, we combine iron and cysteine supplementation with the use of an E. coli strain upregulated for iron-sulfur cluster protein accumulation. These measures dramatically improve in vivo hydrogenase activation. Two hydrogenases, HydA1 from Chlamydomonas reinhardtii and HydA (CpI) from Clostridium pasteurianum, were produced with this improved system and subsequently purified. Biophysical characterization and FTIR spectroscopic analysis of these enzymes indicate that they harbor the H-cluster and catalyze H(2) evolution with rates comparable to those of enzymes isolated from their respective native organisms. SIGNIFICANCE: The production system we describe will facilitate basic hydrogenase investigations as well as the development of new technologies that utilize these prolific H(2)-producing enzymes. These methods can also be extended for producing and studying a variety of oxygen-sensitive iron-sulfur proteins as well as other proteins requiring anoxic environments

Role of information and communication networks in malaria survival

<p>Abstract</p> <p>Background</p> <p>Quite often symptoms of malaria go unrecognized or untreated. According to the Multilateral Initiative on Malaria, 70% of the malaria cases that are treated at home are mismanaged. Up to 82% of all malaria episodes in sub-Saharan Africa are treated outside the formal health sector. Fast and appropriate diagnosis and treatment of malaria is extremely important in reducing morbidity and mortality.</p> <p>Method</p> <p>Data from 70 different countries is pooled together to construct a panel dataset of health and socio-economic variables for a time span of (1960–2004). The generalized two-stage least squares and panel data models are used to investigate the impact of information and communication network (ICN) variables on malaria death probability. The intensity of ICN is represented by the number of telephone main lines per 1,000 people and the number of television sets per 1,000 people.</p> <p>Results</p> <p>The major finding is that the intensity of ICN is associated with reduced probability of deaths of people that are clinically identified as malaria infected. The results are robust for both indicators i.e. interpersonal and mass communication networks and for all model specifications examined.</p> <p>Conclusion</p> <p>The results suggest that information and communication networks can substantially scale up the effectiveness of the existing resources for malaria prevention. Resources spent in preventing malaria are far less than needed. Expanded information and communication networks will widen the avenues for community based "participatory development", that encourages the use of local information, knowledge and decision making. Timely information, immediate care and collective knowledge based treatment can be extremely important in reducing child mortality and achieving the millennium development goal.</p

Relation between body mass index and depression: a structural equation modeling approach

<p>Abstract</p> <p>Background</p> <p>Obesity and depression are two major diseases which are associated with many other health problems such as hypertension, dyslipidemia, diabetes mellitus, coronary heart disease, stroke, myocardial infarction, heart failure in patients with systolic hypertension, low bone mineral density and increased mortality. Both diseases share common health complications but there are inconsistent findings concerning the relationship between obesity and depression. In this work we used the <it>structural equation modeling </it>(SEM) technique to examine the relation between body mass index (BMI), as a proxy for obesity, and depression using the Canadian Community Health Survey, Cycle 1.2.</p> <p>Methods</p> <p>In this SEM model we postulate that 1) BMI and depression are directly related, 2) BMI is directly affected by the physical activity and, 3)depression is directly influenced by stress. SEM was also used to assess the relation between BMI and depression separately for males and females.</p> <p>Results</p> <p>The results indicate that higher BMI is associated with more severe form of depression. On the other hand, the more severe form of depression may result in less weight gain. However, the association between depression and BMI is gender dependent. In males, the higher BMI may result in a more severe form of depression while in females the relation may not be the same. Also, there was a negative relationship between physical activity and BMI.</p> <p>Conclusion</p> <p>In general, use of SEM method showed that the two major diseases, obesity and depression, are associated but the form of the relation is different among males and females. More research is necessary to further understand the complexity of the relationship between obesity and depression. It also demonstrated that SEM is a feasible technique for modeling the relation between obesity and depression.</p

Seasonality in pulmonary tuberculosis among migrant workers entering Kuwait

<p>Abstract</p> <p>Background</p> <p>There is paucity of data on seasonal variation in pulmonary tuberculosis (TB) in developing countries contrary to recognized seasonality in the TB notification in western societies. This study examined the seasonal pattern in TB diagnosis among migrant workers from developing countries entering Kuwait.</p> <p>Methods</p> <p>Monthly aggregates of TB diagnosis results for consecutive migrants tested between January I, 1997 and December 31, 2006 were analyzed. We assessed the amplitude (<it>α</it>) of the sinusoidal oscillation and the time at which maximum (<it>θ</it>°) TB cases were detected using Edwards' test. The adequacy of the hypothesized sinusoidal curve was assessed by <it>χ</it>²goodness-of-fit test.</p> <p>Results</p> <p>During the 10 year study period, the proportion (per 100,000) of pulmonary TB cases among the migrants was 198 (4608/2328582), (95% confidence interval: 192 – 204). The adjusted mean monthly number of pulmonary TB cases was 384. Based on the observed seasonal pattern in the data, the maximum number of TB cases was expected during the last week of April (<it>θ</it>° = 112°; <it>P </it>< 0.001). The amplitude (± se) (<it>α </it>= 0.204 ± 0.04) of simple harmonic curve showed 20.4% difference from the mean to maximum TB cases. The peak to low ratio of adjusted number of TB cases was 1.51 (95% CI: 1.39 – 1.65). The <it>χ</it>²goodness-of-test revealed that there was no significant (<it>P </it>> 0.1) departure of observed frequencies from the fitted simple harmonic curve. Seasonal component explained 55% of the total variation in the proportions of TB cases (100,000) among the migrants.</p> <p>Conclusion</p> <p>This regularity of peak seasonality in TB case detection may prove useful to institute measures that warrant a better attendance of migrants. Public health authorities may consider re-allocation of resources in the period of peak seasonality to minimize the risk of <it>Mycobacterium tuberculosis </it>infection to close contacts in this and comparable settings in the region having similar influx of immigrants from high TB burden countries. Epidemiological surveillance for the TB risk in the migrants in subsequent years and required chemotherapy of detected cases may contribute in global efforts to control this public health menace.</p

Comparative LCA of concrete with recycled aggregates: a circular economy mindset in Europe

[EN] Purpose Construction and demolition waste (C&DW) is the largest waste stream in the European Union (EU) and all over the world. Proper management of C&DW and recycled materials¿including the correct handling of hazardous waste¿can have major benefits in terms of sustainability and the quality of life. The Waste Framework Directive 2008/98/EC aims to have 70% of C&DW recycled by 2020. However, except for a few EU countries, only about 50% of C&DW is currently being recycled. In the present research, the environmental impact of concrete with recycled aggregates and with geopolymer mixtures is analysed. The aim of the present research is to propose a comparative LCA of concrete with recycled aggregates in the context of European politics. Methods Life cycle assessment (LCA) methodology is applied using Simapro© software. A cradle to grave analysis is carried out. The results are analysed based on the database Ecoinvent 3.3 and Impact 2002+. Results Results show that the concrete with 25% recycled aggregates is the best solution from an environmental point of view. Furthermore, geopolymer mixtures could be a valid alternative to reduce the phenomenon of ¿global warming¿; however, the production of sodium silicate and sodium hydroxide has a great environmental impact. Conclusions A possible future implementation of the present study is certainly to carry out an overall assessment and to determine the most cost-effective option among the different competing alternatives through the life cycle cost analysis.Colangelo, F.; Gómez-Navarro, T.; Farina, I.; Petrillo, A. (2020). Comparative LCA of concrete with recycled aggregates: a circular economy mindset in Europe. International Journal of Life Cycle Assessment. 25(9):1790-1804. https://doi.org/10.1007/s11367-020-01798-6S17901804259Akhtar A, Sarmah (2018) Construction and demolition waste generation and properties of recycled aggregate concrete: a global perspective. J Cleaner Prod 186:262–281Bare JC, Hofstetter P, Penningtonne DW, Helias A, de Haes U (2000) Midpoints versus endpoints: the sacrifices and benefits. Int J Life Cycle Assess 5(6):319–326Blengini GA, Garbarino E (2010) Resources and waste management in Turin (Italy): the role of recycled aggregates in the sustainable supply mix. J Clean Prod 18(10–11):1021–1030Blengini GA, Garbarino E, Šolar S, Shields DJ, Hámor T, Vinai R, Agioutantis Z (2012) Life cycle assessment guidelines for the sustainable production and recycling of aggregates: the sustainable aggregates resource management project (SARMa). J Clean Prod 27:177–181Blengini GA, Garbarino E, Bevilacqua P (2017) Sustainability and integration between mineral resources and C&DW management: overview of key issues towards a resource-efficient Europe. Env Eng Man J 16(2):493–502Borghi G, Pantini S, Rigamonti L (2018) Life cycle assessment of non-hazardous construction and demolition waste (CDW) management in Lombardy region (Italy). J Clean Prod 184:815–825Braga AM, Silvestre JD, de Brito J (2017) Compared environmental and economic impact from cradle to gate of concrete with natural and recycled coarse aggregates. J Clean Prod 162:529–543Chen C, Habert G, Bouzidi Y, Jullien A, Ventura A (2010) LCA allocation procedure used as an incitative method for waste recycling: an application to mineral additions in concrete. Res Con Rec 54(12):1231–1240Chen Z, Gu H, Bergman RD, Liang S (2020) Comparative life-cycle assessment of a high-rise mass timber building with an equivalent reinforced concrete alternative using the Athena impact estimator for buildings. Sustainability (Switzerland) 12(11):4708Colangelo F, Cioffi R (2017) Mechanical properties and durability of mortar containing fine fraction of demolition wastes produced by selective demolition in South Italy. Comp Part B: Eng 115:43–50Colangelo F, Petrillo A, Cioffi R, Borrelli C, Forcina A (2018a) Life cycle assessment of recycled concretes: a case study in southern Italy. Sci Total Env 615:1506–1517Colangelo F, Forcina A, Farina I, Petrillo A (2018b) Life cycle assessment (LCA) of different kinds of concrete containing waste for sustainable construction. Buildings 8(5):70Colangelo F, Navarro TG, Petrillo A, Farina I, Cioffi R (2020) Life-cycle impact of concrete with recycled materials. Encyclopedia of Renewable and Sustainable Materials, Volume 5(2020):414–421COM (2012) 433, COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT AND THE COUNCIL Strategy for the sustainable competitiveness of the construction sector and its enterprises, http://eur-lex.europa.eu/procedure/EN/201859, Brussels, 31.7.2012, COM(2012) 433 finalCOM (2014) 445, COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT AND THE COUNCIL, http://ec.europa.eu/environment/eussd/pdf/SustainableBuildingsCommunication.pdf, Brussels, 1.7.2014 COM(2014) 445 finalDavidovits J (2018) Geopolymers based on natural and synthetic metakaolin a critical review. Ceramic Eng Science Proc 38(3):201–214Di Maria A, Eyckmans J, Van Acker K (2018) Downcycling versus recycling of construction and demolition waste: combining LCA and LCC to support sustainable policy making. Waste Man 75:3–21Directive 2008/98/EC on waste (Waste Framework Directive), http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32008L0098EN 1992-1-1:(2004) Eurocode 2: Design of concrete structures - Part 1–1: General rules and rules for buildingsEstanqueiro B, Dinis Silvestre J, de Brito J, Duarte Pinheiro M (2018) Environmental life cycle assessment of coarse natural and recycled aggregates for concrete. Eur J Env Civ Eng 22(4):429–449Etxeberria M, Vázquez E, Marí A, Barra M (2007) Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cem Conc Res 37(5):735–742EU construction & demolition waste management protocol (2016) BrusselsGálvez-Martos J-L, Styles D, Schoenberger H, Zeschmar-Lahl B (2018) Construction and demolition waste best management practice in Europe. Res Con Rec 136:166–178Gluth, G.J.G., Arbi, K., Bernal, S.A., Bondar, D., Castel, A., Chithiraputhiran, S., Dehghan, A., Dombrowski-Daube, K., Dubey, A., Ducman, V., Peterson, K., Pipilikaki, P., Valcke, S.L.A., Ye, G., Hajimohammadi, A., van Deventer, J.S.J., 2017. Characterisation of one-part geopolymer binders made from fly ash. Waste Biom Val, 8(1), pp. 225–233Gomes R, Silvestre JD, de Brito J (2020) Environmental, economic and energy life cycle assessment “from cradle to cradle” (3E-C2C) of flat roofs. Journal of Building Engineering 32:101436ISO 14040 (2006) Environmental management life cycle assessment. Principles and Framework. ISO, GenevaISO 14044 (2006) Environmental management. Life cycle assessment. Requirements and Guidelines. ISO, GenevaJafary Nasab T, Monavari SM, Jozi SA, Majedi H (2020) Assessment of carbon footprint in the construction phase of high-rise constructions in Tehran. Int J Environ Sci Technol 17(6):3153–3164Jolliet O, Margni M, Charles R, Humbert S, Payet J, Rebitzer G, Rosenbaum R (2003) Impact 2002+: a new life cycle impact assessment methodology. Int J Life Cycle Assess 8(6):324–333Khan MW, Ali Y, De Felice F, Salman A, Petrillo A (2019) Impact of brick kilns industry on environment and human health in Pakistan. Sci Total Environ 678:383–389Knoeri C, Sanyé-Mengual E, Althaus H-J (2013) Comparative LCA of recycled and conventional concrete for structural applications. Int J Life Cycle Assess 18(5):909–918Lu W, Yan H (2011) A framework for understanding waste management studies in construction. Waste Man 31:1252–1260Marinković S, Radonjanin V, Malešev M, Ignjatović I (2010) Comparative environmental assessment of natural and recycled aggregate concrete. Waste Man 30(11):2255–2264Mercante IT, Bovea MD, Ibáñez-Forés V, Arena AP (2012) Life cycle assessment of construction and demolition waste management systems: a Spanish case study. Int J Life Cycle Assess 17(2):232–241Pantini S, Giurato M, Rigamonti L (2019) A LCA study to investigate resource-efficient strategies for managing post-consumer gypsum waste in Lombardy region (Italy). Res Con Rec 147:157–168Petrillo A, Cioffi R, De Felice F, Colangelo F, Borrelli C (2016) An environmental evaluation: a comparison between geopolymer and OPC concrete paving blocks manufacturing process in Italy. Env Prog Sus Energy 35(6):1699–1708Provis JL (2017) Alkali-activated cementitious materials and concretes - steps towards standardization, American Concrete Inst, ACI Special Publication 2017-January (SP 320), pp. 444-448Sayagh S, Ventura A, Hoang T, François D (2010) Sensitivity of the LCA allocation procedure for BFS recycled into pavement structures. Res cons rec 54(6):348–358Tangtinthai N, Heidrich O, Manning DAC (2019) Role of policy in managing mined resources for construction in Europe and emerging economies. J Env Man 236:613–621Tošić N, Marinković S, Dašić T, Stanić M (2015) Multicriteria optimization of natural and recycled aggregate concrete for structural use. J Clean Prod 87(1):766–776Van den Heede P, De Belie N (2012) Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: literature review and theoretical calculations. Cem Conc Comp 34(4):431–442Vossberg C, Mason-Jones K, Cohen B (2014) An energetic life cycle assessment of C&D waste and container glass recycling in Cape Town, South Africa. Res Con Rec 88:39–49Walling SA, Notman S, Watts P, Govan N, Provis JL (2019) Portland cement based immobilization/destruction of chemical weapon agent degradation products. Industrial Eng Chemistry Res 58(24):10383–10393Wu H, Zuo J, Yuan H, Zillante G, Wang J (2019) A review of performance assessment methods for construction and demolition waste management. Res Cons Recycling 150:104407Zhang C, Hu M, Dong L, Gebremariam A, Mirand-Xicotencatl B, Di Maio F, Tukker A (2019) Eco-efficiency assessment of technological innovations in high-grade concrete recycling. Res Cons Recycling 149:649–66

Effect of a Herbal-Leucine mix on the IL-1β-induced cartilage degradation and inflammatory gene expression in human chondrocytes

<p>Abstract</p> <p>Background</p> <p>Conventional treatments for the articular diseases are often effective for symptom relief, but can also cause significant side effects and do not slow the progression of the disease. Several natural substances have been shown to be effective at relieving the symptoms of osteoarthritis (OA), and preliminary evidence suggests that some of these compounds may exert a favorable influence on the course of the disease. The objective of this study was to investigate the anti-inflammatory/chondroprotective potential of a Herbal and amino acid mixture containing extract of the <it>Uncaria </it>tomentosa, <it>Boswellia spp</it>., <it>Lepidium meyenii and L-Leucine </it>on the IL-1β-induced production of nitric oxide (NO), glycosaminoglycan (GAG), matrix metalloproteinases (MMPs), aggrecan (ACAN) and type II collagen (COL2A1) in human OA chondrocytes and OA cartilage explants.</p> <p>Methods</p> <p>Primary OA chondrocytes or OA cartilage explants were pretreated with Herbal-<it>Leucine </it>mixture (HLM, 1-10 μg/ml) and then stimulated with IL-1β (5 ng/ml). Effect of HLM on IL-1β-induced gene expression of iNOS, MMP-9, MMP-13, ACAN and COL2A1 was verified by real time-PCR. Estimation of NO and GAG release in culture supernatant was done using commercially available kits.</p> <p>Results</p> <p>HLM tested in these <it>in vitro </it>studies was found to be an effective anti-inflammatory agent, as evidenced by strong inhibition of iNOS, MMP-9 and MMP-13 expression and NO production in IL-1β-stimulated OA chondrocytes (p < 0.05). Supporting these gene expression results, IL-1β-induced cartilage matrix breakdown, as evidenced by GAG release from cartilage explants, was also significantly blocked (p < 0.05). Moreover, in the presence of herbal-<it>Leucine </it>mixture (HLM) up-regulation of ACAN and COL2A1 expression in IL-1β-stimulated OA chondrocytes was also noted (p < 0.05). The inhibitory effects of HLM were mediated by inhibiting the activation of nuclear factor (NF)-kB in human OA chondrocytes in presence of IL-1β.</p> <p>Conclusion</p> <p>Our data suggests that HLM could be chondroprotective and anti-inflammatory agent in arthritis, switching chondrocyte gene expression from catabolic direction towards anabolic and regenerative, and consequently this approach may be potentially useful as a new adjunct therapeutic/preventive agent for OA or injury recovery.</p