3,934 research outputs found
Policy Implications of Solutions of Dynamic Optimal Production Problems for Disinflationary Economic Policies
The speed of the application of current economic policies that are being followed in Turkey is a very important question. This paper uses the results of the solutions of optimal control theoretic inventory and production problems for companies to offer opinions on this question under various assumptions on interest rates. The most important result of the paper is that the rate of decline of interest rates is as important as the absolute level of interest rates for investors to start investing in inventories (consequently in machinery and other production infrastructure) which, in turn, implies growth of the economy.Disinflation, Control Theory, Economic Policy
Chlorinated Hydrocarbons in Marine Female Fishes of Lagos Lagoon
Three female fish species of Snapper (Lutjanus goreensis), Herring (Sardinella maderensis) and Oarfish (Regalecus glesne)
were sampled from Lagos Lagoon during the dry and wet seasons of 2008 and 2009 and subjected to cold extraction and
clean-up procedure. Their muscle tissues were analysed for chlorinated hydrocarbons because they can concen trate
pesticide residues from sediments and water. The identification and quantitation of the chlorinated hydrocarbon residues
were performed using a gas chromatograph with a
63
Ni electron capture detector. The fishes had condition factor of more
than 1 except Regalecus glesne. A higher concentration of the residues was observed during the dry season. The residue
distribution pattern in muscle tissues of the fishes were: Regalecus glesne > Sardinella maderensis > Lutjanus goreensis.
Regalecus glesne recorded the highest chlorinated hydrocarbon content: 6181.16 ng/g. Except for endrin and heptachlor,
the estimated daily intakes of the organochlorines were within the acceptable daily intakes while the levels of residues in
the fishes were within the permissible residue limits
Evaluation of feasibility analyses for different hub heights of a wind turbine
In this study, techno-economic and environmental feasibility analyses of a wind turbine for different hub connection heights were investigated using RETScreen Expert energy analysis program. Çerkezköy district of Tekirda? province was chosen as the region in which the wind turbines will be constructed. According to the analysis of hourly wind speed data recorded by a meteorology station established in Çerkezköy, it can be easily said that the annual average wind speed for 10 m altitude is 5.305 m/s and the directions of the prevailing winds are between NE (45o) and ENE (67.5o). The model of the wind turbine chosen in the present study is the Sinovel 1500/77, and techno-economic and environmental evaluations were made for the hub connection heights of 65, 80 and 100 m. In accordance with the study results, when the payback period is evaluated in terms of energy production cost and greenhouse gas reduction potential, the wind turbine with 100 m hub connection height exhibits better results than others with 65 and 80 m. It is thought that this study will guide selecting a suitable hub height for wind power plants and wind turbines that are planned to be established in Çerkezköy, one of the largest industrial regions of Turkey to obtain cost-effective and environment-friendly conditions. © 2022
Assessment of CO2Emissions Reduction Based on Different Insulation Materials in Residential Buildings: Example from Turkey
2021 11th International Conference on Future Environment and Energy, ICFEE 2021 -- 28 January 2021 through 30 January 2021 -- -- 170060In this study, the reduction of CO2 emissions caused by energy savings due to thermal insulation materials applied to the exterior of buildings was investigated. The study includes the evaluation of four different insulation materials including XPS, EPS, PUR and Rock Wool in terms of the reduction potential of CO2 emissions for all city centers in Turkey. Moreover, the optimum insulation thicknesses of the buildings that have both heating and cooling needs were determined for these insulation materials by means of Life Cycle Cost Analysis. The annual energy needs per unit area of the external walls of the buildings, which are insulated according to their optimum insulation thickness were determined and correspondingly the amount of fuel needed to meet this energy was calculated. In the study, CO2 emission values released from buildings to atmosphere were compared in terms of fuel amounts obtained from total energy demands during heating supplied from natural gas and cooling supplied from electricity of the residential buildings insulated with diverse insulation materials. Consequently, when CO2 reduction potentials of the buildings insulated with materials in the optimum insulation thickness are compared with those of the uninsulated buildings, insulation material providing highest potential in CO2 emission mitigation was to be found as Rock wool. © Published under licence by IOP Publishing Ltd
Finite-volume corrections to the CP-odd nucleon matrix elements of the electromagnetic current from the QCD vacuum angle
Nucleon electric dipole moments originating from strong CP-violation are
being calculated by several groups using lattice QCD. We revisit the finite
volume corrections to the CP-odd nucleon matrix elements of the electromagnetic
current, which can be related to the electric dipole moments in the continuum,
in the framework of chiral perturbation theory up to next-to-leading order
taking into account the breaking of Lorentz symmetry. A chiral extrapolation of
the recent lattice results of both the neutron and proton electric dipole
moments is performed, which results in
cm and
cm.Comment: 12 pages, 3 figures. A longer title, no change in the text. Accepted
for publication in PL
Iterative Time-Varying Filter Algorithm Based on Discrete Linear Chirp Transform
Denoising of broadband non--stationary signals is a challenging problem in
communication systems. In this paper, we introduce a time-varying filter
algorithm based on the discrete linear chirp transform (DLCT), which provides
local signal decomposition in terms of linear chirps. The method relies on the
ability of the DLCT for providing a sparse representation to a wide class of
broadband signals. The performance of the proposed algorithm is compared with
the discrete fractional Fourier transform (DFrFT) filtering algorithm.
Simulation results show that the DLCT algorithm provides better performance
than the DFrFT algorithm and consequently achieves high quality filtering.Comment: 6 pages, conference pape
Distribution of heavy metals in sediments of Igbede, Ojo and Ojora rivers of Lagos, Nigeria
The distribution of some heavy metals,
namely Cd, Pb, Zn, Fe, Cu, Cr and Mn in epipellic
sediments of Igbede, Ojo and Ojora rivers of Lagos
was studied weekly in the early summer (November)
of 2003. The levels of selected trace metals were determined
using Atomic Absorption Spectrophotometer
(UNICAM 969 AAS SOLAR). Trends in heavy metal
burdens in the sediments revealed weekly variations in
all the rivers assessed. Statistical analyses also showed
different mean levels of trace metals in the aquatic environments,
the distribution of which followed the sequence
Fe > Zn > Mn > Pb > Cu > Cr > Cd, Fe
> Zn > Cu > Mn > Pb > Cr > Cd and Fe > Zn >
Mn > Cu > Cr > Pb > Cd in Igbede, Ojo and Ojora
rivers respectively. Fe recorded the highest concentration
levels (1,582.95 ± 96.57 μg/g–1,910.34 ± 723.19
μg/g) in all the sediments investigated while the Cd
levels (0.06 ± 0.10 μg/g–0.47 ± 0.36 μg/g) were the
lowest. Expectedly, trace metal concentrations in fine
grain muddy sediments of the Igbede and Ojo coastline
were much higher than those of Ojora which consist
of coarse and sandy deposits covering the near shore
area. Generally, the results obtained fell within toler-able limits stipulated by World Health Organization
(WHO)
Antifungal prophylaxis in stem cell transplantation centers in Turkey
Objective: This study aimed to determine the current state of antifungal prophylaxis in Turkish stem cell transplantation (SCT) centers. Materials and Methods: The were 38 active stem cell transplantation centers in Turkey, 28 of which were registered with the European Group for Blood and Marrow Transplantation (EBMT). Survey questionnaires were sent to the 28 EBMT centers in an effort to collect data on antifungal prophylaxis in different settings. In all, 24 of the centers completed the survey; 1 of the 24 centers was excluded from the study, as it was under construction at the time and was not performing transplantation.Results: In all, 15 (65%) of the 23 centers were adult SCT centers, 7 (31%) were pediatric SCT centers, and 1 center treated both adult and pediatric patients. All centers (23/23) performed both allogeneic and autologous transplants, 20 centers performed non-myeloablative transplants, 8 performed cord blood transplants, and 7 performed unrelated transplants. Primary antifungal prophylaxis was used at all 23 centers during allogeneic transplants, whereas 18 of the 23 centers used it during every autologous transplant and 2 of the 23 centers used it during autologous transplants on a per case basis. The most common drug used for prophylaxis was fluconazole (F) (21/23), followed by itraconazole (I) (3/23), amphotericin-B (2/23), and posaconazole (1/23). Among the 23 centers, 3 reported that for allogenic transplants they changed the antifungal prophylactic in cases of graft versus host disease (GVHD), and 12 of the 23 centers reported that they changed the antifungal prophylactic in case of nearby construction. All 23 centers performed secondary prophylaxis. Conclusion: Antifungal prophylaxis for hematopoetic SCT patients was the standard protocol in the 23 centers included in the study, usually with such azoles as F. The introduction of posaconazole in Turkey and the potential approval of voriconazole for antifungal prophylaxis will eventually alter prophylaxis practice in Turkey, which we plan to assess in the future
- …