Cost-effectiveness of intensive Vs. standard follow-up models for patients with breast cancer in Shiraz, Iran

Background: Breast cancer is the most common type of cancer amongst women throughout the world. Currently, there are various follow-up strategies implemented in Iran, which are usually dependent on clinic policies and agreement among the resident oncologists. Purpose: A cost-effectiveness analysis was performed to assess the cost-effectiveness of intensive follow-up versus standard models for early breast cancer patients in Iran. Materials and methods: This cross sectional study was performed with 382 patients each in the intensive and standard groups. Costs were identified and measured from a payer perspective, including direct medical outlay. To assess the effectiveness of the two follow-up models we used a decision tree along with indicators of detection of recurrence and metastasis, calculating expected costs and effectiveness for both cases; in addition, incremental cost-effectiveness ratios were determined. Results: The results of decision tree showed expected case detection rates of 0.137 and 0.018 and expected costs of US24,494.62 and US6,859.27, respectively, for the intensive and standard follow-up models. Tornado diagrams revealed the highest sensitivity to cost increases using the intensive follow-up model with an ICER=US148,196.2. Conclusion: Overall, the results showed that the intensive follow-up method is not cost-effective when compared to the standard model

Predicton of interface level height of stratified liquid-liquid flow using artficial neural network

In this study, artificial neural network (ANN) was used to predict the interface level height (ILH) of two immiscible liquids flowing in a horizontal pipe. A three-layer feed-forward back-propagation (FFBP) neural network was constructed and trained with experimental data of two different liquid-liquid flow systems reported in the literature. The all studied flow patterns were stratified flow (stratified smooth and stratified wavy with or without droplets at interface ). The input parameters of the ANN model were superficial velocity of phases, pipe diameter, the ratio of the lighter phase density to the heavier phase density (ρlp/ρhp) and the ratio of the lighter phase viscosity to the heavier phase viscosity (μlp/μhp), while the interface level height (ILH) of phases was its output. The Levenberg–Marquardt (LM) algorithm, the hyperbolic tangent sigmoid and the linear activation functions were used for training and developing the ANN. Optimal configuration of the ANN model was determined using minimizing the mean absolute percent error (MAPE) and mean square errors (MSE) between experimental and predicted ILH data by the ANN model. The results showed that the optimal configuration was a network with five neurons in hidden layer that was highly accurate in predicting the interface level. MAPE and correlation coefficient (R) between the experimental and predicted values were determined as 1.8% and 0.9962 for training, and 1.52% and 0.9996 for testing date sets, respectively

Multi-walled carbon nanotubes modified with iron oxide and silver nanoparticles (MWCNT-Fe<inf>3</inf>O<inf>4</inf>/Ag) as a novel adsorbent for determining PAEs in carbonated soft drinks using magnetic SPE-GC/MS method

The synthesis of compounds with an excellent adsorption capability plays an essential role to remove contaminants such as phthalic acid esters (PAEs) with potential carcinogenic characteristics from different food products. In this context, for the first time, a novel adsorbent (MWCNT-Fe3O4/Ag) was synthesized by using iron (magnetic agent), and silver (catalytic and surface enhancer agent) to further approach in a magnetic SPE-GC/MS method for determining of PAEs in carbonated soft drink samples. The limit of detection (LOD) and limit of quantification (LOQ) values of MSPE-GC/MS were determined in six PAEs as a range of 10.8–22.5 and 36–75 ng/L, respectively. Also, the calibration curves of PAEs were linear (R2 = 0.9981–0.9995) over the concentration level of 10.000 ng/L and the recoveries of the six PAEs were ranging from 96.60% to 109.22% with the RSDs less than 8%. Moreover, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), X-ray diffraction (XRD), vibrating sample magnetometry (VSM) and transmission electron microscopy analyses (TEM) were utilized to characterize the produced MWCNT-Fe3O4/Ag. Based on the findings, the surface of MWCNT is relatively uniform, which became coarser after loading with Fe3O4/Ag particles. Also, EDX spectrum showed the carbon (C), iron (Fe), oxygen (O), Ag and copper (Cu) are the main components of synthesized MWCNTs-Fe3O4/Ag. The successful adhesion of Fe3O4/Ag on the texture of MWCNTs using a co-precipitation method was confirmed by XRD and FT-IR assays. Additionally, excellent crystallinity and clear lattice nanocrystals fringes of prepared MWCNT-Fe3O4/Ag was demonstrated by TEM analysis. Based on the obtained VSM images, the prepared sorbent (MWCNT-Fe3O4/Ag) has the good magnetic performance for magnetic separation and extraction processes. It was concluded that the synthesized MWCNT-Fe3O4/Ag could be used as an efficient adsorbent for determining contaminants such as PAEs in different beverage samples. © 201

An efficient trio-based mini-haplotyping method for genetic diagnosis of phenylketonuria

Objective: The phenylalanine hydroxylase (PAH) locus has high linkage disequilibrium. Haplotypes related to this locus may thus be considered sufficiently informative for genetic diagnosis and carrier screening using multi-allelic markers. In this study, we present an efficient method for haplotype analysis of PAH locus using multiplexing dyes. In addition, we explain how to resolve the dye shift challenge in multiplex short tandem repeat (STR) genotyping. Materials and Methods: One hundred family trios were included in this descriptive study. The forward primer of a tetra-nucleotide STR and the reverse primer of a variable number tandem repeat (VNTR) were labeled with three different non-overlapping dyes 5-carboxyfluorescein (FAM), 6-carboxy-N,N,N�,N�-tetramethylrhodamine (HEX) and 6-carboxy-N,N,N�,N�-tetramethylrhodamine (TAMRA). The polymerase chain reaction (PCR) products from each family trio were multiplexed for capillary electrophoresis and results were analyzed using Peak Scanner software. Results: Multiplexing trio products decreased the cost significantly. The TAMRA labeled products had a significant predictable shift (migrated at a slower electrophoretic rate) relative to the HEX and FAM labeled products. Through our methodology we achieve, the less inter-dye shift than intra-dye shift variance. Correcting the dye shift in the labeled products, according to the reference allele size, significantly decreased the inter-dye variability (P<0.001). Conclusion: Multiplexing trio products helps to detect and resolve the dye shift accurately in each family, which otherwise would result in diagnostic error. The dye system of FAM, HEX and TAMRA is more feasible and cheaper than other dye systems

Multi-walled carbon nanotubes modified with iron oxide and silver nanoparticles (MWCNT-Fe 3 O 4 /Ag) as a novel adsorbent for determining PAEs in carbonated soft drinks using magnetic SPE-GC/MS method

The synthesis of compounds with an excellent adsorption capability plays an essential role to remove contaminants such as phthalic acid esters (PAEs) with potential carcinogenic characteristics from different food products. In this context, for the first time, a novel adsorbent (MWCNT-Fe 3 O 4 /Ag) was synthesized by using iron (magnetic agent), and silver (catalytic and surface enhancer agent) to further approach in a magnetic SPE-GC/MS method for determining of PAEs in carbonated soft drink samples. The limit of detection (LOD) and limit of quantification (LOQ) values of MSPE-GC/MS were determined in six PAEs as a range of 10.8�22.5 and 36�75 ng/L, respectively. Also, the calibration curves of PAEs were linear (R 2 = 0.9981�0.9995) over the concentration level of 10.000 ng/L and the recoveries of the six PAEs were ranging from 96.60 to 109.22 with the RSDs less than 8. Moreover, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), X-ray diffraction (XRD), vibrating sample magnetometry (VSM) and transmission electron microscopy analyses (TEM) were utilized to characterize the produced MWCNT-Fe 3 O 4 /Ag. Based on the findings, the surface of MWCNT is relatively uniform, which became coarser after loading with Fe 3 O 4 /Ag particles. Also, EDX spectrum showed the carbon (C), iron (Fe), oxygen (O), Ag and copper (Cu) are the main components of synthesized MWCNTs-Fe 3 O 4 /Ag. The successful adhesion of Fe 3 O 4 /Ag on the texture of MWCNTs using a co-precipitation method was confirmed by XRD and FT-IR assays. Additionally, excellent crystallinity and clear lattice nanocrystals fringes of prepared MWCNT-Fe 3 O 4 /Ag was demonstrated by TEM analysis. Based on the obtained VSM images, the prepared sorbent (MWCNT-Fe 3 O 4 /Ag) has the good magnetic performance for magnetic separation and extraction processes. It was concluded that the synthesized MWCNT-Fe 3 O 4 /Ag could be used as an efficient adsorbent for determining contaminants such as PAEs in different beverage samples. © 2018 The Author

Multi-walled carbon nanotubes modified with iron oxide and silver nanoparticles (MWCNT-Fe3O4/Ag) as a novel adsorbent for determining PAEs in carbonated soft drinks using magnetic SPE-GC/MS method

The synthesis of compounds with an excellent adsorption capability plays an essential role to remove contaminants such as phthalic acid esters (PAEs) with potential carcinogenic characteristics from different food products. In this context, for the first time, a novel adsorbent (MWCNT-Fe3O4/Ag) was synthesized by using iron (magnetic agent), and silver (catalytic and surface enhancer agent) to further approach in a magnetic SPE-GC/MS method for determining of PAEs in carbonated soft drink samples. The limit of detection (LOD) and limit of quantification (LOQ) values of MSPE-GC/MS were determined in six PAEs as a range of 10.8�22.5 and 36�75 ng/L, respectively. Also, the calibration curves of PAEs were linear (R2 = 0.9981�0.9995) over the concentration level of 10.000 ng/L and the recoveries of the six PAEs were ranging from 96.60 to 109.22 with the RSDs less than 8. Moreover, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), X-ray diffraction (XRD), vibrating sample magnetometry (VSM) and transmission electron microscopy analyses (TEM) were utilized to characterize the produced MWCNT-Fe3O4/Ag. Based on the findings, the surface of MWCNT is relatively uniform, which became coarser after loading with Fe3O4/Ag particles. Also, EDX spectrum showed the carbon (C), iron (Fe), oxygen (O), Ag and copper (Cu) are the main components of synthesized MWCNTs-Fe3O4/Ag. The successful adhesion of Fe3O4/Ag on the texture of MWCNTs using a co-precipitation method was confirmed by XRD and FT-IR assays. Additionally, excellent crystallinity and clear lattice nanocrystals fringes of prepared MWCNT-Fe3O4/Ag was demonstrated by TEM analysis. Based on the obtained VSM images, the prepared sorbent (MWCNT-Fe3O4/Ag) has the good magnetic performance for magnetic separation and extraction processes. It was concluded that the synthesized MWCNT-Fe3O4/Ag could be used as an efficient adsorbent for determining contaminants such as PAEs in different beverage samples. © 201

The Effect of Plant Growth Regulators on Shoot Proliferation and Rooting of Crataegus Pseudohetrophylla Pojark. Via in Vitro Culture

Crataegus is a tree species from Rosaceae family with medicinal, ornamental and commercial utilizations. Effect of different concentrations of plant growth regulators on shoot proliferation of Crataegus pseudohetrophylla Pojark. via in vitro culture was studied using single node explants. The grown shoots were transferred to MS medium supplemented with different concentrations of cytokinins (BAP, KIN, 2iP and Zt) in combination with NAA in 30 treatments, with 3 replications and each replication included 5 explants. Data were recorded after 3 subcultures. For rooting, basal end of shoots were dipped into 300mg/l of IBA at different durations (0, 5, 10, 20, 30, 40, 50 and 60 minutes), then the dipped shoots were cultured on hormone free 1/2 VS medium. The results of analysis of variance showed that there were significant differences in all of the traits. Results indicated that the highest number of shoots (39.33) was obtained on medium containing 8 mg / l BAP plus 2 mg / l NAA. The highest shoot length (4.67 cm) and leaf size (3.73 cm) was achieved on 7 mg / l BAP plus 2 mg / l NAA and 2 mg / l Zt plus 1 mg / l NAA, respectively. The highest rate of rooting (33.33%) and root number (4n) were induced on shoots dipped for 40 minutes in 300 mg / l IBA