13 research outputs found
Sources of porcine longissimus dorsi muscle (LDM) innervation as revealed by retrograde neuronal tract-tracing.
The aim of the present study was to establish the origin of the motor, autonomic and sensory innervation of the L1-L2 segment of the porcine longissimus dorsi muscle (LDM), in order to provide morphological basis for further studies focusing on this neural pathway under experimental conditions, e.g. phototerapy and/or lateral electrical surface stimulation. To reach the goal of the study, multiple injections of the fluorescent neuronal tracer Fast Blue (FB) were made into the LDM region between the spinal processes of the vertebrae L1 and L2. The spinal cord (Th13-S1 segments) as well as the sensory and autonomic ganglia of interest, i.e., dorsal root (DRG) and sympathetic chain ganglia from corresponding spinal cord levels were collected three weeks later. FB-positive (FB+) motoneurons were observed exclusively within the nucleus ventromedialis at L1 and L2 spinal cord level, forming the most ventro-medially arranged cell column within this nucleus. Primary sensory and sympathetic chain neurons were found in appropriate ipsilateral ganglia at Th15-L3 levels. The vast majority of retrogradely traced neurons (virtually all motoneurons, approximately 76% of sensory and 99.4% of sympathetic chain ganglia neurons) was found at the L1 and L2 levels. The morphometric evaluation of FB-labeled DRG neurons showed that the majority of them (approximately 66%) belonged to the class of small-diameter perikarya (10-30 microm in diameter), whereas those of medium size (30-80 microm in diameter) and of large diameter (more than 80 microm) constituted 22.6% and 11.5% of all DRG neurons, respectively. The results of the present study demonstrated that the nerve terminals supplying porcine LDM originated from different levels of the spinal cord, dorsal root and sympathetic chain ganglia. Thus, the study has revealed sources and morphological characteristic of somatic, autonomic and spinal afferent neurons supplying porcine LDM, simultaneously pointing out the characteristic features of their distribution pattern
1,2-Hydrogenation and Transhydrogenation Catalyzed by 3-Ketosteroid Δ1-Dehydrogenase from Sterolibacterium denitrificans—Kinetics, Isotope Labelling and QM:MM Modelling Studies
Bacteria and fungi that are able to metabolize steroids express 3-ketosteroid-Δ1-dehydrogenases (KstDs). KstDs such as AcmB form Sterolibacterium denitrificans Chol-1 catalyze the enantioselective 1α,2β-dehydrogenation of steroids to their desaturated analogues, e.g., the formation of 1,4-androstadiene-3,17-dione (ADD) from 4-androsten-3,17-dione (AD). The reaction catalyzed by KstD can be reversed if the appropriate electron donor, such as benzyl viologen radical cation, is present. Furthermore, KstDs can also catalyze transhydrogenation, which is the transfer of H atoms between 3-ketosteroids and 1-dehydrosteroids. In this paper, we showed that AcmB exhibits lower pH optima for hydrogenation and dehydrogenation by 3.5–4 pH units than those observed for KstD from Nocardia corallina. We confirmed the enantiospecificity of 1α,2β-hydrogenation and 1α,2β-transhydrogenation catalyzed by AcmB and showed that, under acidic pH conditions, deuterons are introduced not only at 2β but also at the 1α position. We observed a higher degree of H/D exchange at Y363, which activates the C2-H bond, compared to that at FAD, which is responsible for redox at the C1 position. Furthermore, for the first time, we observed the introduction of the third deuteron into the steroid core. This effect was explained through a combination of LC-MS experiments and QM:MM modelling, and we attribute it to a decrease in the enantioselectivity of C2-H activation upon the deuteration of the 2β position. The increase in the activation barrier resulting from isotopic substitution increases the chance of the formation of d3-substituted 3-ketosteroids. Finally, we demonstrate a method for the synthesis of 3-ketosteroids chirally deuterated at 1α,2β positions, obtaining 1α,2β-d2-4-androsten-3,17-dione with a 51% yield (8.61 mg)
Universal capability of 3-ketosteroid Δ1-dehydrogenases to catalyze Δ1-dehydrogenation of C17-substituted steroids
Background: 3-Ketosteroid Δ1-dehydrogenases (KSTDs) are the enzymes involved in microbial cholesterol degradation and modification of steroids. They catalyze dehydrogenation between C1 and C2 atoms in ring A of the polycyclic structure of 3-ketosteroids. KSTDs substrate spectrum is broad, even though most of them prefer steroids with small substituents at the C17 atom. The investigation of the KSTD’s substrate specificity is hindered by the poor solubility of the hydrophobic steroids in aqueous solutions. In this paper, we used 2-hydroxpropyl-β-cyclodextrin (HBC) as a solubilizing agent in a study of the KSTDs steady-state kinetics and demonstrated that substrate bioavailability has a pivotal impact on enzyme specificity. Results: Molecular dynamics simulations on KSTD1 from Rhodococcus erythropolis indicated no difference in ΔGbind between the native substrate, androst-4-en-3,17-dione (AD; − 8.02 kcal/mol), and more complex steroids such as cholest-4-en-3-one (− 8.40 kcal/mol) or diosgenone (− 6.17 kcal/mol). No structural obstacle for binding of the extended substrates was also observed. Following this observation, our kinetic studies conducted in the presence of HBC confirmed KSTD1 activity towards both types of steroids. We have compared the substrate specificity of KSTD1 to the other enzyme known for its activity with cholest-4-en-3-one, KSTD from Sterolibacterium denitrificans (AcmB). The addition of solubilizing agent caused AcmB to exhibit a higher affinity to cholest-4-en-3-one (Ping-Pong bi bi KmA = 23.7 μM) than to AD (KmA = 529.2 μM), a supposedly native substrate of the enzyme. Moreover, we have isolated AcmB isoenzyme (AcmB2) and showed that conversion of AD and cholest-4-en-3-one proceeds at a similar rate. We demonstrated also that the apparent specificity constant of AcmB for cholest-4-en-3-one (kcat/KmA = 9.25∙106 M−1 s−1) is almost 20 times higher than measured for KSTD1 (kcat/KmA = 4.71∙105 M−1 s−1). Conclusions: We confirmed the existence of AcmB preference for a substrate with an undegraded isooctyl chain. However, we showed that KSTD1 which was reported to be inactive with such substrates can catalyze the reaction if the solubility problem is addressed
Toward Better Efficiency of Air-Stable Polyazomethine-Based Organic Solar Cells Using Time-Resolved Photoluminescence and Light-Induced Electron Spin Resonance as Verification Methods
Investigation of quaternary structure of aggregating 3-ketosteroid dehydrogenase from Sterolibacterium denitrificans : in the pursuit of consensus of various biophysical techniques
Variously Prepared Zeolite Y as a Modifier of ANFO
In the presented research, we investigated Ammonium Nitrate Fuel Oil (ANFO), with the addition of variously modified zeolite Y as an attractive explosive. Analysis of both blasting tests and thermodynamic models of blasting properties led to the conclusion that the addition of zeolite Y enhanced the detonation properties of such prepared ANFO via the growth of the detonation pressure, temperature, compression energy, and heat of the explosion. Generally, the modification of ANFO with variously prepared zeolite Y also reduced the volume of (COx + NOx) post-blast fumes. Furthermore, it was found that the ANFO’s velocity of detonation (VOD) could be controlled by the choice of the way of zeolite Y modification. Namely, for zeolite Y without Mg, as well as Mg-Y prepared via the impregnation method, the VOD rose. The opposite effect was observed when ANFO was modified with Mg-Y, obtained from the deposition of Mg over zeolite Y via the ultrasonic-assisted procedure
New lupeol esters as active substances in the treatment of skin damage.
The purpose of the research was to obtain new derivatives of natural triterpene lupeol and to evaluate their potential as active substances in the treatment of skin damage. Four new lupeol esters (propionate, succinate, isonicotinate and acetylsalicylate) and lupeol acetate were obtained using an eco-friendly synthesis method. In the esterification process, the commonly used hazardous reagents in this type of synthesis were replaced by safe ones. This unconventional, eco-friendly, method is particularly important because the compounds obtained are potentially active substances in skin care formulations. Even trace amounts of hazardous reagents can have a toxic effect on damaged or irritated tissues. The molecular structure of the esters were confirmed by 1H NMR, 13C NMR and IR spectroscopy methods. Their crystal structures were determined using XRD method. To complete the analysis of their characteristics, physicochemical properties (melting point, lipophilicity, water solubility) and biological activity of the lupeol derivatives were studied. Results of an irritant potential test, carried out on Reconstructed Human Epidermis (RHE), confirmed that the synthesized lupeol derivatives are not cytotoxic and they stimulate a process of human cell proliferation. The safety of use for tested compounds was determined in a cell viability test (cytotoxicity detection kit based on the measurement of lactate dehydrogenase activity) for keratinocytes and fibroblasts. The results obtained showed that the modification of lupeol structure improve its bioavailability and activity. All of the esters penetrate the stratum corneum and the upper layers of the dermis better than the maternal lupeol. Lupeol isonicotinate, acetate and propionate were the most effective compounds in a stimulation of the human skin cell proliferation process. This combination resulted in an increase in the concentration of cells of more than 30% in comparison to control samples. The results indicate that the chemical modification of lupeol allows to obtain promising active substances for treatment of skin damage, including thermal, chemical and radiation burns
The efficient -dehydrogenation of a wide spectrum of 3-ketosteroids in a broad pH range by 3-ketosteroid dehydrogenase from Sterolibacterium denitrificans
Structure, mutagenesis, and QM:MM modeling of 3-ketosteroid -dehydrogenase from Sterolibacterium denitrificans : the role of a new putative membrane-associated domain and proton-relay system in catalysis
3-Ketosteroid Δ1-dehydrogenases (KstD)
are important
microbial flavin enzymes that initiate the metabolism of steroid ring
A and find application in the synthesis of steroid drugs. We present
a structure of the KstD from Sterolibacterium denitrificans (AcmB), which contains a previously uncharacterized putative membrane-associated
domain and extended proton-relay system. The experimental and theoretical
studies show that the steroid Δ1-dehydrogenation
proceeds according to the Ping–Pong bi–bi kinetics and
a two-step base-assisted elimination (E2cB) mechanism. The mechanism
is validated by evaluating the experimental and theoretical kinetic
isotope effect for deuterium-substituted substrates. The role of the
active-site residues is quantitatively assessed by point mutations,
experimental activity assays, and QM/MM MD modeling of the reductive
half-reaction (RHR). The pre-steady-state kinetics also reveals that
the low pH (6.5) optimum of AcmB is dictated by the oxidative half-reaction
(OHR), while the RHR exhibits a slight optimum at the pH usual for
the KstD family of 8.5. The modeling confirms the origin of the enantioselectivity
of C2-H activation and substrate specificity for Δ4-3-ketosteroids. Finally, the cholest-4-en-3-one turns out to be
the best substrate of AcmB in terms of ΔG of
binding and predicted rate of dehydrogenation