Joint Precoder and Artificial Noise Design for MIMO Wiretap Channels with Finite-Alphabet Inputs Based on the Cut-Off Rate

We consider precoder and artificial noise (AN) design for multi-antenna wiretap channels under the finite-alphabet input assumption. We assume that the transmitter has access to the channel coefficients of the legitimate receiver and knows the statistics of the eavesdropper's channel. Accordingly, we propose a secrecy rate maximization algorithm using a gradient descent-based optimization of the precoder matrix and an exhaustive search over the power levels allocated to the AN. We also propose algorithms to reduce the complexities of direct ergodic secrecy rate maximization by: 1) maximizing a cut-off rate-based approximation for the ergodic secrecy rate, simplifying the mutual information expression, which lacks a closed-form and 2) diagonalizing the channels toward the legitimate receiver and the eavesdropper, which allows for employing a per-group precoding-based technique. Our numerical results reveal that jointly optimizing the precoder and the AN outperforms the existing solutions in the literature, which rely on the precoder optimization only. We also demonstrate that the proposed low complexity alternatives result in a small loss in performance while offering a significant reduction in computational complexity. © 2002-2012 IEEE

Physical Layer Security for Space Shift Keying Transmission with Precoding

We investigate the effect of transmitter side channel state information on the achievable secrecy rates of space shift keying. Through derivation of the gradient of the secrecy rate, we formulate an iterative algorithm to maximize the achievable secrecy rates. We also introduce two lower complexity signal design algorithms for different scenarios based on the number of antennas at the eavesdropper. Our results illustrate the effectiveness of the proposed precoding techniques in attaining positive secrecy rates over a wide range of signal to noise ratios. © 2016 IEEE

Low complexity precoding for MIMOME wiretap channels based on cut-off rate

We propose a low complexity transmit signal design scheme for achieving information-theoretic secrecy over a MIMO wiretap channel driven by finite-alphabet inputs. We assume that the transmitter has perfect channel state information (CSI) of the main channel and also knows the statistics of the eavesdropper's channel. The proposed transmission scheme relies on jointly optimizing the precoder matrix and the artificial noise so as to maximize the achievable secrecy rates. In order to lower the computational complexity associated with the transmit signal design, we employ a design metric using the cut-off rate instead of the mutual information. We formulate a gradient-descent based optimization algorithm and demonstrate via extensive numerical examples that the proposed signal design scheme can yield an enhanced secrecy performance compared with the existing solutions in spite of its relatively lower computational complexity. The impacts of the modulation order as well as the number of antennas at the transmitter and receiver ends on the achievable secrecy rates are also investigated. © 2016 IEEE

Evaluating the performance characteristics of some ion chamber dosimeters in high dose per pulse intraoperative electron beam radiation therapy

Introduction: Employing routine dosimetry protocols for intraoperative electron beam needs further refinements to obtain reliable results. In this regard, the performance of some cylindrical and parallel plate ion chambers for both relative and absolute dosimetry of intraoperative electron beam has been evaluated. Materials and methods: Four different ion chambers including Semiflex and PinPoint cylindrical chambers as well as Advanced Markus and Roos parallel plate ones were employed for PDD measurement and dose rate determination in reference condition of the electron beam produced by LIAC intraoperative accelerator. The results of PDD measurements were compared with those of Gafchromic EBT2 film. Specific recommendations were followed to determine the chamber correction factors including k s and k Q,Q 0 for absolute dosimetry in intraoperative reference condition. Results: There was good agreement between PDDs measured by employed chambers and EBT2 film at all nominal energies. Nevertheless, Advanced Markus chamber had the best performance based on the gamma analysis results. Obtained k Q,Q 0 and k s for studied ion chambers largely differed from expected values by TRS-398 protocol. The difference of measured dose rates at 12 MeV energy by investigated chambers was less than 1.1 and Advanced Markus had the best accordance with pre-set dose rate by manufacture. Conclusion: Results showed that ignoring the specific recommended procedures in determining the chamber correction factors causes the overestimation of the measured dose. Therefore, dedicated dosimetry protocol should be developed for high dose per pulse intraoperative electron dosimetry including all of the updated correction factors and deviations from routine ionometric electron dosimetry formalisms. © 2019 Associazione Italiana di Fisica Medic

Monte Carlo-based determination of radiation leakage dose around a dedicated IOERT accelerator

Evaluating the stray radiation around medical electron accelerators is a mandatory issue. Surveying the radiation leakage dose is important for patients, technicians, and health physicists, due to radiation protection aspects. Consequently, radiation leakage dose around the head of a mobile-dedicated intraoperative radiotherapy accelerator (LIAC), at different electron energies and field sizes have been evaluated in this study. More specifically, the MCNPX Monte Carlo code was used to model the LIAC head, connected applicator, and employed water phantom. Radiation leakage dose around the LIAC head was calculated for different energy and field sizes through tuning the Monte Carlo results to the practically measured doses. These measurements were performed using an Advance Markus ionization chamber inside an automated MP3-XS water phantom. The good agreement between the calculated dose distributions within the water tank and corresponding dose measurements show that the simulation model of the LIAC head is appropriate for radiation leakage assessment. The obtained radiation leakage dose distribution highly depends on the electron energy and applicator diameter. With increasing the electron energy, the leakage dose decreased, while increasing the field size increased the leakage dose. It is concluded that the rate of stray radiation and leakage dose around the LIAC head in both vertical and horizontal planes were acceptable according to the recommended radiation protection criteria. To meet the recommended dose limit (100 µSv/week for controlled areas), the maximum number of patients should be kept to four patients per week inside a standard and unshielded operating room. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature

Evaluating the radiation contamination dose around a high dose per pulse intraoperative radiotherapy accelerator: A Monte Carlo study

Aim: In this study, the radiation contamination dose (RCD) for different combinations of electron energy/distance, applicator and radius around the light intraoperative accelerator (LIAC), a high dose per pulse dedicated intraoperative electron radiotherapy machine, has been estimated. Being aware about the amount of RCDs is highly recommended for linear medical electron accelerators.Methods and methods: Monte Carlo Nuclear Particles (MCNP) code was used to simulate the LIAC® head and calculate RCDs. Experimental RCDs measurements were also done by Advanced Markus chamber inside a MP3-XS water phantom. Relative differences of simulations and measurements were calculated.Result: RCD reduction by distance from the machine follows the inverse-square law, as expected. The RCD was decreased by increasing angle from applicator walls opposed to the electron beam direction. The maximum differences between the simulation and measurement results were lower than 3#x00025;.Conclusions: The RCD is strongly dependent on electron beam energy, applicator size and distance from the accelerator head. Agreement between the MCNP results and ionometric dosimetry confirms the applicability of this simulation code in modelling the intraoperative electron beam and obtaining the dosimetric parameters. The RCD is a parameter that would restrict working with LIAC in an unshielded operative room. © Cambridge University Press 2020