40,374 research outputs found
Controlling Listeria monocytogenes on ready-to-eat poultry products using carboxymethylcellulose film coatings containing green tea extract (GTE) combined with nisin and malic acid
The ability to control Listeria monocytogenes on ready-to-eat poultry products using carboxymethyl-cellulose film coatings containing green tea extract (GTE), malic acid (M), nisin (N), and their combinations was evaluated. The antimicrobials (GTE: 1.0%, nisin: 10,000 IU/g, malic acid: 1.0%) were incorporated alone or in combination into a carboxymethyl cellulose film coating. Pre-inoculated, fully cooked chicken pieces (~1g, 1cm x 1cm x 1cm) were coated with the film solution. The coated chicken pieces were stored at 4°C and the inhibitory activity against Listeria monocytogenes was evaluated at 0, 7, 14, 21, and 28 days. The highest inhibitory activity was found in the sample containing GTE, nisin, and malic acid in combination with a reduction of 3.3 log CFU/mL. These data demonstrate that GTE—combined with nisin and malic acid and incorporated into a carboxymethyl-cellulose film coating, multiple-hurdle technology—is effective in inhibiting L. monocytogenes growth on fully cooked chicken pieces at 4°C. Research in the area of finding natural antimicrobials to aid in the prevention of food-borne illnesses is necessary to improve safety and shelf life of products such as ready-to-eat meats. This project provides an effective combination of natural anti-microbials to control L. monocytogenes in ready-to-eat chicken pieces
Radiative transfer in spherical shell atmospheres. 2: Asymmetric phase functions
The effects are investigated of sphericity on the radiation reflected from a planet with a homogeneous, conservative scattering atmosphere of optical thicknesses of 0.25 and 1.0. A Henyey-Greenstein phase function with asymmetry factors of 0.5 and 0.7 is considered. Significant differences were found when these results were compared with the plane-parallel calculations. Also large violations of the reciprocity theorem, which is only true for plane-parallel calculations, were noted. Results are presented for the radiance versus height distributions as a function of planetary phase angle
Further investigation of a contactless patient-electrode interface of an Electrical Impedance Mammography system
The Sussex Mk4 Electrical Impedance Mammography (EIM) system is a novel instrument, designed for the detection of early breast cancer, based upon Electrical Impedance Tomography (EIT). Many innovations in the field have been incorporated in the design improving both signal distribution and response. This paper investigates the behaviour of the contactless patient-electrode interface. The interface was studied in detail using phantom and healthy volunteer, in-vivo, data. Our findings show the necessity for the careful design of electrode enclosure so that the response of the system is not affected by the unpredictable positioning of the breast; it closely mimics those conditions seen when using the phantom. The paper includes a number of possible designs and their individual characteristics. In addition an explanation on the unanticipated effects and solutions for such are described. © 2010 IOP Publishing Ltd
The Effect of Different Forms of Synaptic Plasticity on Pattern Recognition in the Cerebellar Cortex
“The original publication is available at www.springerlink.com”. Copyright Springer.Many cerebellar learning theories assume that long-term depression (LTD) of synapses between parallel fibres (PFs) and Purkinje cells (PCs) provides the basis for pattern recognition in the cerebellum. Previous work has suggested that PCs can use a novel neural code based on the duration of silent periods. These simulations have used a simplified learning rule, where the synaptic conductance was halved each time a pattern was learned. However, experimental studies in cerebellar slices show that the synaptic conductance saturates and is rarely reduced to less than 50% of its baseline value. Moreover, the previous simulations did not include plasticity of the synapses between inhibitory interneurons and PCs. Here we study the effect of LTD saturation and inhibitory synaptic plasticity on pattern recognition in a complex PC model. We find that the PC model is very sensitive to the value at which LTD saturates, but is unaffected by inhibitory synaptic plasticity.Peer reviewe
In-plane thermal conductivity modeling of carbon filled liquid crystal polymer based resins
Adding conductive carbon fillers to insulating thermoplastic resins increases composite electrical and thermal conductivity. Often, as much of a single type of carbon filler is added to achieve the desired conductivity, while still allowing the material to be molded into a bipolar plate for a fuel cell. In this study, varying amounts of three different carbons (carbon black, synthetic graphite particles, and carbon fiber) were added to Vectra A950RX Liquid Crystal Polymer. The in-plane thermal conductivity of the resulting single filler composites were tested. The results showed that adding synthetic graphite particles caused the largest increase in the in-plane thermal conductivity of the composite.
The composites were modeled using ellipsoidal inclusion problems to predict the effective in-plane thermal conductivities at varying volume fractions with only physical property data of constituents. The synthetic graphite and carbon black were modeled using the average field approximation with ellipsoidal inclusions and the model showed good agreement with the experimental data. The carbon fiber polymer composite was modeled using an assemblage of coated ellipsoids and the model showed good agreement with the experimental data
Metastability and the Casimir Effect in Micromechanical Systems
Electrostatic and Casimir interactions limit the range of positional
stability of electrostatically-actuated or capacitively-coupled mechanical
devices. We investigate this range experimentally for a generic system
consisting of a doubly-clamped Au suspended beam, capacitively-coupled to an
adjacent stationary electrode. The mechanical properties of the beam, both in
the linear and nonlinear regimes, are monitored as the attractive forces are
increased to the point of instability. There "pull-in" occurs, resulting in
permanent adhesion between the electrodes. We investigate, experimentally and
theoretically, the position-dependent lifetimes of the free state (existing
prior to pull-in). We find that the data cannot be accounted for by simple
theory; the discrepancy may be reflective of internal structural instabilities
within the metal electrodes.Comment: RevTex, 4 pages, 4 figure
Generating the Best Stacking Sequence Table for the Design of Blended Composite Structures
In order to improve the ability of a large-scale light-weight composite structure to carry tensile or compressive loads, stiffeners are added to the structure. The stiffeners divide the structure into several smaller panels. For a composite structure to be manufacturable, it is necessary that plies are continuous in multiple adjacent panels. To be able to prescribe a manufacturable design, an optimization algorithm can be coupled with a reference table for the stacking sequences (SST). As long as the ply stacks are selected from the SST, it is guaranteed that the design is manufacturable and all strength related guidelines associated with the design of composite structures are satisfied. An SST is made only based on strength related guidelines. Therefore, there exist a large number of possibilities for SSTs. Minimized mass is a typical goal in the design of aircraft structures. Different SSTs result in different values for the minimized mass. Thus it is crucial to perform optimization based on the SST which results in the lowest mass. This paper aims to introduce an approach to generate a unique SST resulting in the lowest mass. The proposed method is applied to the optimization problem of a stiffened composite structure resembling the skin of an aircraft wing box
Universal properties of knotted polymer rings
By performing Monte Carlo sampling of -steps self-avoiding polygons
embedded on different Bravais lattices we explore the robustness of
universality in the entropic, metric and geometrical properties of knotted
polymer rings. In particular, by simulating polygons with up to we
furnish a sharp estimate of the asymptotic values of the knot probability
ratios and show their independence on the lattice type. This universal feature
was previously suggested although with different estimates of the asymptotic
values. In addition we show that the scaling behavior of the mean squared
radius of gyration of polygons depends on their knot type only through its
correction to scaling. Finally, as a measure of the geometrical
self-entanglement of the SAPs we consider the standard deviation of the writhe
distribution and estimate its power-law behavior in the large limit. The
estimates of the power exponent do depend neither on the lattice nor on the
knot type, strongly supporting an extension of the universality property to
some features of the geometrical entanglement.Comment: submitted to Phys.Rev.
A Study of Activated Processes in Soft Sphere Glass
On the basis of long simulations of a binary mixture of soft spheres just
below the glass transition, we make an exploratory study of the activated
processes that contribute to the dynamics. We concentrate on statistical
measures of the size of the activated processes.Comment: 17 pages, 9 postscript figures with epsf, uses harvmac.te
- …