Use of ibuprofen for the closure of patent ductus arteriosus in preterm infants: A systematic review of meta-analyses

Aim: To systematically review ibuprofen, including versus indomethacin and paracetamol/acetaminophen, for the closure of patent ductus arteriosus (PDA). Methods: Pubmed, Embase, Cochrane and gray literature were searched to summarize ibuprofen outcomes in closure of PDA in published meta-analyses (MAs). Results: Seven MAs were included. Including high dose (HD) use, ibuprofen is equivalent/superior to indomethacin, and inferior/equivalent to paracetamol. Oral ibuprofen had higher efficacy than IV ibuprofen, including compared with indomethacin and paracetamol. Ibuprofen had safety advantages over indomethacin. Indomethacin and paracetamol had safety advantages over IV ibuprofen. HD of ibuprofen increases efficacy, but not toxicity. Conclusion: Evidence on ibuprofen effectiveness and safety, including the dosage forms, is limited by heterogeneity in doses and the levels of methods quality and risk of bias. 2021 Future Medicine Ltd.. All rights reserved.The authors acknowledge the funds provided by Qatar University, Qatar, through the internal grant #QUST-1-CPH-2020-1.Scopu

A comprehensive study of Al-Cu-Mg system reinforced with nano-ZrO2 particles synthesized by powder metallurgy technique

Abstract More focus has recently been placed on enhancing the strength, elastic modulus, coefficient of thermal expansion (CTE), wear and corrosion resistance, and other qualities of aluminum (Al) alloys by varying the quantity of ceramics added for a range of industrial uses. In this regard, Al-4.2-Cu-1.6Mg matrix nanocomposites reinforced with nano-ZrO2 particles have been created using the powder metallurgy approach. The microstructure and particle size distributions of the produced powders were analyzed using a diffraction particle size analyzer, XRD, TEM, and SEM. To achieve good sinterability, the powders were compacted and sintered in argon. The sintered nanocomposites' mechanical, elastic, and physicochemical characteristics were measured. Additionally, the behavior of corrosion, wear, and thermal expansion were examined. The results showed a decrease in the particle sizes of the Al-Cu-Mg alloy by adding ZrO2 nanoparticles up to 45.8 nm for the composite containing 16 wt.% ZrO2. By increasing the sintering temperature to 570 °C, the densification of nanocomposites was enhanced. Also, the coefficient of thermal expansion and wear rate remarkably decreased by about 28 and 37.5% by adding 16 wt.% ZrO2. Moreover, microhardness yield, strength, and Young’s modulus were enhanced to 161, 145, and 64%, respectively, after adding 16 wt.% ZrO2. In addition, increasing the exposure time was responsible for decreasing the corrosion rate for the same sample