4 research outputs found
An In Vitro Study of the Role of Implant Positioning on Ulnohumeral Articular Contact in Distal Humeral Hemiarthroplasty
© 2017 American Society for Surgery of the Hand Purpose To investigate the effect of implant positioning on ulnohumeral contact using patient-specific distal humeral (DH) implants. Methods Seven reverse-engineered DH implants were manufactured based on computed tomography scans of their osseous geometry. Native ulnae were paired with corresponding native humeri and custom DH implants in a loading apparatus. The ulna was set at 90° of flexion and the humeral component (either native bone or reverse-engineered implant) was positioned from 5° varus to 5° valgus in 2.5° increments under a 100-N compressive load. Contact with the ulna was measured with both the native distal humerus and the reverse-engineered DH implant at all varus-valgus (VV) angles, using a joint casting method. Contact patches were digitized and analyzed in 4 ulnar quadrants. Output variables were contact area and contact pattern. Results Mean contact area of the native articulation was significantly greater than with the distal humeral hemiarthroplasty (DHH) implants across all VV positions. Within the native condition, contact area did not significantly change owing to VV angulation. Within the DHH condition, contact area also did not significantly change owing to VV angulation. Conversely, in the DHH condition, contact pattern did significantly change. Medial ulnar contact pattern was significantly affected by VV angulation. Lateral ulnar contact was variably affected, but generally decreased as well. Conclusions Ulnar contact patterns were changed as a result of VV implant positioning using reverse-engineered DH implants, most notably on the medial aspect of the joint. Implant positioning plays a crucial role in producing contact patterns more like those observed in the native joint. Clinical relevance Recent clinical evidence reports nonsymmetrical ulnar wear after DHH. This work suggests that implant positioning is likely a contributing factor and that more exact implant positioning may lead to better clinical outcomes
A systematic review of economic evaluations of interventions targeting childhood overweight and obesity
This systematic review critically appraised and synthesized evidence from economic evaluations of interventions targeting childhood excess weight. We conducted systematic searches in 11 databases from inception to April 19, 2023. Studies were eligible if they evaluated interventions targeting children up to 18 years and the study intervention(s) targeted childhood excess weight or sought to improve diet or physical activity, regardless of the type of economic evaluation or the underpinning study design. We synthesized evidence using narrative synthesis methods. One-hundred fifty-one studies met the eligibility criteria and were classified into three groups based on the intervention approach: prevention-only (13 studies), prevention and treatment (100 studies), and treatment-only (38 studies). The predominant setting and study design differed considerably between the three groups of studies. However, compared with usual care, most interventions were deemed cost-effective. The study participants' ages, sex, and socioeconomic status were crucial to intervention cost-effectiveness. Interventions whose effects were projected beyond childhood, such as bariatric surgery, lower protein infant formula, and home-based general practitioner consultations, tended to be cost-effective. However, cost-effectiveness was sensitive to the assumptions underlying the persistence and intensity of such effects. Our findings can inform future recommendations on the conduct of economic evaluations of interventions targeting childhood overweight and obesity, as well as practice and policy recommendations
Supplementary Tables from Estimating the effect of COVID-19 on trial design characteristics: a registered report
There have been reports of poor-quality research during the COVID-19 pandemic. This registered report assessed design characteristics of registered clinical trials for COVID-19 compared to non-COVID-19 trials to empirically explore the design of clinical research during a pandemic and how it compares to research conducted in non-pandemic times. We did a retrospective cohort study with a 1 : 1 ratio of interventional COVID-19 registrations to non-COVID-19 registrations, with four trial design outcomes: use of control arm, randomization, blinding and prospective registration. Logistic regression was used to estimate the odds ratio of investigating COVID-19 versus not COVID-19 and estimate direct and total effects of investigating COVID-19 for each outcome. The primary analysis showed a positive direct and total effect of COVID-19 on the use of control arms and randomization. It showed a negative direct effect of COVID-19 on blinding but no evidence of a total effect. There was no evidence of an effect on prospective registration. Taken together with secondary and sensitivity analyses, our findings are inconclusive but point towards a higher prevalence of key design characteristics in COVID-19 trials versus controls. The findings do not support much existing COVID-19 research quality literature, which generally suggests that COVID-19 led to a reduction in quality. Limitations included some data quality issues, minor deviations from the pre-registered plan and the fact that trial registrations were analysed which may not accurately reflect study design and conduct. Following in-principle acceptance, the approved stage 1 version of this manuscript was pre-registered on the Open Science Framework at https://doi.org/10.17605/OSF.IO/5YAEB. This pre-registration was performed prior to data analysis
Effect of annealing on the mechanical properties and the degradation of electrospun polydioxanone filaments
Annealing, or heat treatment, has traditionally been used as a treatment to improve the
strength and stiffness of electrospun materials. Understanding the extent to which
annealing can improve the mechanical properties and alter the degradation rate of
electrospun polydioxanone filaments could influence the range of its potential clinical
applications.
In this study, we investigated the effect of annealing electrospun polydioxanone
filaments at varying times and temperatures and subsequently subjecting them to in
vitro degradation in phosphate buffer saline for up to 6 weeks. Fibre alignment,
tensile strength and thermal properties were assessed.
It was determined that annealing at 65ËšC for 3 hours only marginally improved the
tensile strength (9±2%) but had a significant effect on reducing strain and rate of
degradation, as well as maintaining fibre alignment within the filament. The filament
retained significantly more of its force at failure after 4 weeks (82±15%, compared to
61±20% for non annealed filaments) and after 6 weeks of degradation (81±9%,
compared to 55±13% for non annealed filaments). Conversely, annealing filaments at
75˚C improved the initial tensile strength of the filament (17±6%), but over 6 weeks,
both samples annealed at 75ËšC and 85ËšC otherwise performed similarly or
mechanically worse than those not annealed.
These findings suggest that annealing at low temperatures is more useful as a method
to tailor degradation rate than to improve mechanical properties. The ability to
modulate the degradation profile with annealing may become useful to tailor the
properties of electrospun materials without altering the chemistry of the polymer
used. This might better match the degradation of the implant and gradual loss of
mechanical properties with the new matrix deposition within the structure, enabling
multiple regenerative strategies within a single biomaterial system