11 research outputs found
Differential SAR interferometry for the monitoring of land subsidence along railway infrastructures
The paper summarizes the results of an ongoing research project carried out in cooperation between CTTC (Spain) and the University of Milan (Italy). The work aimed at investigating the role of quality indicators in the analysis of differential interferometric SAR time series products. Small baseline multi-temporal differential interferometric techniques have been used to derive TS products from six-year Sentinel-1 images covering railway networks in Barcelona, Spain. Redundancies of interferograms and post-phase unwrapping phase estimation residuals were pivotal parameters in determining the reliabilities of measurements. Preliminary results have supported the importance of quality indicators as well as the feasibility of multi-temporal differential interferometric techniques in monitoring subsidence along railway infrastructures. The time series evolutions of measurements from coherent scatterers have also shown that the target area is stable in the study period.AGAUR, Generalitat de Catalunya, has partially funded this work through a grant to recruit early-stage research staff (Ref: 2021FI_B2_00186).Peer ReviewedPostprint (published version
Spatio-temporal quality indicators for differential interferometric Synthetic Aperture Radar data
Satellite-based interferometric synthetic aperture radar (InSAR) is an invaluable technique in the detection and monitoring of changes on the surface of the earth. Its high spatial coverage, weather friendly and remote nature are among the advantages of the tool. The multi-temporal differential InSAR (DInSAR) methods in particular estimate the spatio-temporal evolution of deformation by incorporating information from multiple SAR images. Moreover, opportunities from the DInSAR techniques are accompanied by challenges that affect the final outputs. Resolving the inherent ambiguities of interferometric phases, especially in areas with a high spatio-temporal deformation gradient, represents the main challenge. This brings the necessity of quality indices as important DInSAR data processing tools in achieving ultimate processing outcomes. Often such indices are not provided with the deformation products. In this work, we propose four scores associated with (i) measurement points, (ii) dates of time series, (iii) interferograms and (iv) images involved in the processing. These scores are derived from a redundant set of interferograms and are calculated based on the consistency of the unwrapped interferometric phases in the frame of a least-squares adjustment. The scores reflect the occurrence of phase unwrapping errors and represent valuable input for the analysis and exploitation of the DInSAR results. The proposed tools were tested on 432,311 points, 1795 interferograms and 263 Sentinel-1 single look complex images by employing the small baseline technique in the PSI processing chain, PSIG of the geomatics division of the Centre Tecnològic de Telecomunicacions de Catalunya (CTTC). The results illustrate the importance of the scores—mainly in the interpretation of the DInSAR outputs.This research was partially funded by the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR), Generalitat de Catalunya—through a grant for the recruitment of early-stage research staff (Ref: 2021FI_B2 00186).Peer ReviewedPostprint (published version
Ground movement classification using statistical tests over persistent scatterer interferometry time series
This study proposes modifications to an existing automatic classification method of Persistent Scatterers Interferometry (PSI) time series (TS) and a new procedure to classify ground movements into seven classes. We also represent a technique to detect TSs affected by phase unwrapping errors and a reclassification part to detect stable points, which are incorrectly classified as moving points using the original method. Around 60 km2 of Catalunya were classified using Sentinel-1 images and a PSI technique. The proposed method classified 78359 PS TS. This study provided the spatial distribution of ground movement classes and detected several time series anomalies.Peer ReviewedPostprint (published version
Interferometric SAR deformation timeseries: a quality index
Estimating unknown absolute phase from a wrapped observation is a challenging and ill-posed problem that possibly leads to misinterpretation of interferometric SAR (InSAR) deformation results. In this study, we introduce a quality index to cluster post-phase unwrapping multi-master InSAR timeseries outputs based on the estimated phase residuals and redundancy of network of interferograms. The index is supposed to indicate the reliability of a timeseries, including the identification of persistent scatterers (PSs) possibly affected by phase unwrapping jumps. The algorithm was tested on two Sentinel-1 interferometric datasets with 622,991 and 95,398 PSs, generated from the PSI processing chain PSIG of the geomatics division of CTTC. Promising result have been achieved-especially in identifying erroneous PSs with phase unwrapping jumps. Along with existing temporal phase consistency checking algorithms, the approach could provide rich information toward a better interpretation of the deformation timeseries results.This work has been funded by AGAUR, Generalitat de Catalunya, in the framework of Resolution EMC/ 2459/2019, FI-2020.Peer ReviewedPostprint (published version
InSAR deformation time series classification using a convolutional neural network
Temporal analysis of deformations Time Series (TS) provides detailed information of various natural and humanmade displacements. Interferometric Synthetic Aperture Radar (InSAR) generates millimetre-scale products, indicating the chronicle behaviour of detected targets via TS products. Deep Learning (DL) can handle a massive load of InSAR TS to categorize significant movements from non-moving targets. To this end, we employed a supervised Convolutional Neural Network (CNN) model to distinguish five deformations trends, including Stable, Linear, Quadratic, Bilinear, and Phase Unwrapping Error (PUE). Considering several arguments in a CNN model, we trained numerous combinations to explore the most accurate combination from 5000 samples extracted from a Persistent Scatterer Interferometry (PSI) technique and Sentinel-1 images over the Granada region, Spain. The model overall accuracy exceeds 92%. Deformations of three cases of landslides were also detected over the same area, including the Cortijo de Lorenzo, El Arrecife, and Rules Viaduct areas.Peer ReviewedPostprint (published version
Supervised machine learning algorithms for ground motion time series classification from InSAR data
The increasing availability of Synthetic Aperture Radar (SAR) images facilitates the genera- tion of rich Differential Interferometric SAR (DInSAR) data. Temporal analysis of DInSAR products, and in particular deformation Time Series (TS), enables advanced investigations for ground deforma- tion identification. Machine Learning algorithms offer efficient tools for classifying large volumes of data. In this study, we train supervised Machine Learning models using 5000 reference samples of three datasets to classify DInSAR TS in five deformation trends: Stable, Linear, Quadratic, Bilinear, and Phase Unwrapping Error. General statistics and advanced features are also computed from TS to assess the classification performance. The proposed methods reported accuracy values greater than 0.90, whereas the customized features significantly increased the performance. Besides, the importance of customized features was analysed in order to identify the most effective features in TS classification. The proposed models were also tested on 15000 unlabelled data and compared to a model-based method to validate their reliability. Random Forest and Extreme Gradient Boosting could accurately classify reference samples and positively assign correct labels to random samples. This study indicates the efficiency of Machine Learning models in the classification and management of DInSAR TSs, along with shortcomings of the proposed models in classification of nonmoving targets (i.e., false alarm rate) and a decreasing accuracy for shorter TS.This work is part of the Spanish Grant SARAI, PID2020-116540RB-C21, funded by MCIN/ AEI/10.13039/501100011033. Additionally, it has been supported by the European Regional Devel- opment Fund (ERDF) through the project “RISKCOAST” (SOE3/P4/E0868) of the Interreg SUDOE Programme. Additionally, this work has been co-funded by the European Union Civil Protection through the H2020 project RASTOOL (UCPM-2021-PP-101048474).Peer ReviewedPostprint (published version
Analysis of the products of the Copernicus ground motion service
Radar interferometry has progressed very much in the last two decades. It is now a powerful remote sensing techniques to monitor ground motion. The technique has undergone an important development in terms of processing and data analysis algorithms. This has been accompanied by an important increase of the Synthetic Aperture Radar (SAR) data acquisition capability by spaceborne sensors. A step forward was the launch of the Copernicus Sentinel-1 constellation. This has made the development of A-DInSAR (Advanced Differential Interferometric SAR) ground deformation services technically feasible. The paper is focused on the most important ground motion initiative ever conceived: the European Ground Motion Service (EGMS). This service is part of the Copernicus Land Monitoring Service managed by the European Environment Agency. EGMS involves the ground deformation monitoring at European scale. The service will deliver the first product in May 2022. In this paper we describe some preliminary examples of deformation products coming from the EGMS.This work is part of the Spanish Grant SARAI, PID2020- 116540RB-C21, which has been funded by the MCIN/AEI/ 10.13039/501100011033. The A-DInSAR results shown in this paper belong to the EGMSPeer ReviewedPostprint (published version
Active reflectors for interferometric SAR deformation measurement
This paper is focused on the design, implementation and testing of an active reflector, to be used to support deformation monitoring studies based on Synthetic Aperture Radar interferometry. The device is designed to work in C-band with Sentinel-1 data, operating at 5.405 GHz ± 50 MHz. A brief description of the active reflector is provided. It consists of two antennas and an amplifying section. The active reflector has been tested in different experiments. In this paper, we describe the experiment carried out in the Parc Mediterrani de la Tecnologia (Castelldefels, Barcelona). The result shows a strong correlation with temperature. A calibration test was carried out to experimentally derive a calibration curve to correct the effect of temperature on phase stability.This work is part of a project that has received funding from the
European GNSS Agency under the European Union’s Horizon
2020 research and innovation programme, with grant agreement
No 776335, project GIMS, “Geodetic Integrated Monitoring
System”. This work has been partially funded by AGAUR,
Generalitat de Catalunya, through the Consolidated Research
Group RSE, “Remote Sensing” (Ref: 2017-SGR-00729)Postprint (published version
Recommended from our members
Global burden of 288 causes of death and life expectancy decomposition in 204 countries and territories and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021
BACKGROUND Regular, detailed reporting on population health by underlying cause of death is fundamental for public health decision making. Cause-specific estimates of mortality and the subsequent effects on life expectancy worldwide are valuable metrics to gauge progress in reducing mortality rates. These estimates are particularly important following large-scale mortality spikes, such as the COVID-19 pandemic. When systematically analysed, mortality rates and life expectancy allow comparisons of the consequences of causes of death globally and over time, providing a nuanced understanding of the effect of these causes on global populations. METHODS The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 cause-of-death analysis estimated mortality and years of life lost (YLLs) from 288 causes of death by age-sex-location-year in 204 countries and territories and 811 subnational locations for each year from 1990 until 2021. The analysis used 56 604 data sources, including data from vital registration and verbal autopsy as well as surveys, censuses, surveillance systems, and cancer registries, among others. As with previous GBD rounds, cause-specific death rates for most causes were estimated using the Cause of Death Ensemble model-a modelling tool developed for GBD to assess the out-of-sample predictive validity of different statistical models and covariate permutations and combine those results to produce cause-specific mortality estimates-with alternative strategies adapted to model causes with insufficient data, substantial changes in reporting over the study period, or unusual epidemiology. YLLs were computed as the product of the number of deaths for each cause-age-sex-location-year and the standard life expectancy at each age. As part of the modelling process, uncertainty intervals (UIs) were generated using the 2·5th and 97·5th percentiles from a 1000-draw distribution for each metric. We decomposed life expectancy by cause of death, location, and year to show cause-specific effects on life expectancy from 1990 to 2021. We also used the coefficient of variation and the fraction of population affected by 90% of deaths to highlight concentrations of mortality. Findings are reported in counts and age-standardised rates. Methodological improvements for cause-of-death estimates in GBD 2021 include the expansion of under-5-years age group to include four new age groups, enhanced methods to account for stochastic variation of sparse data, and the inclusion of COVID-19 and other pandemic-related mortality-which includes excess mortality associated with the pandemic, excluding COVID-19, lower respiratory infections, measles, malaria, and pertussis. For this analysis, 199 new country-years of vital registration cause-of-death data, 5 country-years of surveillance data, 21 country-years of verbal autopsy data, and 94 country-years of other data types were added to those used in previous GBD rounds. FINDINGS The leading causes of age-standardised deaths globally were the same in 2019 as they were in 1990; in descending order, these were, ischaemic heart disease, stroke, chronic obstructive pulmonary disease, and lower respiratory infections. In 2021, however, COVID-19 replaced stroke as the second-leading age-standardised cause of death, with 94·0 deaths (95% UI 89·2-100·0) per 100 000 population. The COVID-19 pandemic shifted the rankings of the leading five causes, lowering stroke to the third-leading and chronic obstructive pulmonary disease to the fourth-leading position. In 2021, the highest age-standardised death rates from COVID-19 occurred in sub-Saharan Africa (271·0 deaths [250·1-290·7] per 100 000 population) and Latin America and the Caribbean (195·4 deaths [182·1-211·4] per 100 000 population). The lowest age-standardised death rates from COVID-19 were in the high-income super-region (48·1 deaths [47·4-48·8] per 100 000 population) and southeast Asia, east Asia, and Oceania (23·2 deaths [16·3-37·2] per 100 000 population). Globally, life expectancy steadily improved between 1990 and 2019 for 18 of the 22 investigated causes. Decomposition of global and regional life expectancy showed the positive effect that reductions in deaths from enteric infections, lower respiratory infections, stroke, and neonatal deaths, among others have contributed to improved survival over the study period. However, a net reduction of 1·6 years occurred in global life expectancy between 2019 and 2021, primarily due to increased death rates from COVID-19 and other pandemic-related mortality. Life expectancy was highly variable between super-regions over the study period, with southeast Asia, east Asia, and Oceania gaining 8·3 years (6·7-9·9) overall, while having the smallest reduction in life expectancy due to COVID-19 (0·4 years). The largest reduction in life expectancy due to COVID-19 occurred in Latin America and the Caribbean (3·6 years). Additionally, 53 of the 288 causes of death were highly concentrated in locations with less than 50% of the global population as of 2021, and these causes of death became progressively more concentrated since 1990, when only 44 causes showed this pattern. The concentration phenomenon is discussed heuristically with respect to enteric and lower respiratory infections, malaria, HIV/AIDS, neonatal disorders, tuberculosis, and measles. INTERPRETATION Long-standing gains in life expectancy and reductions in many of the leading causes of death have been disrupted by the COVID-19 pandemic, the adverse effects of which were spread unevenly among populations. Despite the pandemic, there has been continued progress in combatting several notable causes of death, leading to improved global life expectancy over the study period. Each of the seven GBD super-regions showed an overall improvement from 1990 and 2021, obscuring the negative effect in the years of the pandemic. Additionally, our findings regarding regional variation in causes of death driving increases in life expectancy hold clear policy utility. Analyses of shifting mortality trends reveal that several causes, once widespread globally, are now increasingly concentrated geographically. These changes in mortality concentration, alongside further investigation of changing risks, interventions, and relevant policy, present an important opportunity to deepen our understanding of mortality-reduction strategies. Examining patterns in mortality concentration might reveal areas where successful public health interventions have been implemented. Translating these successes to locations where certain causes of death remain entrenched can inform policies that work to improve life expectancy for people everywhere. FUNDING Bill & Melinda Gates Foundation
Capabilities and Contributions of the Dynamic Math Software, GeoGebra---A Review
In this review, the authors provide a survey of research of the dynamic mathematics software, GeoGebra, in the teaching and learning of school mathematics and related fields---including statistics, physics, chemistry and geography. The authors explore the role of GeoGebra as a tool to foster student achievement and teacher efficacy