SUNDAE2 at EuXFEL: A Test Stand to Characterize the Magnetic Field of Superconducting Undulators

European XFEL foresees a superconducting undulator (SCU) afterburner in the SASE2 hard X-ray beamline. It consists of six 5m-long undulator modules with a 5mm vacuum gap, where each module contains two 2m-long coils and one phase shifter. Prior to installation, the magnetic field must be mapped appropriately. Two magnetic measurement test stands named SUNDAE 1 and 2 (Superconducting UNDulAtor Experiment) are being developed at European XFEL. While SUNDAE1 will be a vertical test stand to measure SCU coils up to two meters with Hall probes in a liquid or superfluid helium bath, SUNDAE2 will measure the SCU coils assembled in the final cryostat. This contribution presents the development status of SUNDAE2 and its main requirements

Conceptual Design of a Liquid Helium Vertical Test-Stand for 2m long Superconducting Undulator Coils

Superconducting Undulators (SCUs) can produce higher photon flux and cover a wider photon energy range compared to permanent magnet undulators (PMUs) with the same vacuum gap and period length. To build the know-how to implement superconducting undulators for future upgrades of the European XFEL facility, the test stand SUNDAE1 for the characterization of SCU is being developed. The purpose of SUNDAE1 is the training, tuning and development of new SCU coils by means of precise magnetic field measurements. The experimental setup will allow the characterization of magnets up to 2m in length. These magnets will be immersed in a Helium bath at 4K or 2K temperature. In this article, we describe the experimental setup and highlight its expected performances

SUNDAE1: A Liquid Helium Vertical Test-Stand for 2m Long Superconducting Undulator Coils

Superconducting Undulators (SCUs) can produce higher photon flux and cover a wider photon energy range compared to permanent magnet undulators (PMUs) with the same vacuum gap and period length. To build the know-how to implement superconducting undulators for future upgrades of the European XFEL facility, two magnetic measurement test stands named SUNDAE 1 and 2 (Superconducting UNDulAtor Experiment) are being developed. SUNDAE1 will facilitate research and development on magnet design thanks to the possibility of training new SCU coils and characterizing their magnetic field. The experimental setup will allow the characterization of magnets up to 2m in length. These magnets will be immersed in a Helium bath at 2K or 4K temperature. In this article, we describe the experimental setup and highlight its expected performances

Magnetic Measurement Techniques for the Large-Scale Production of Undulator Segments for the European XFEL

The European X-ray free electron laser (EXFEL) facility is currently under construction. Using the principle of self-amplified spontaneous emission (SASE), intense FEL radiation is generated in three gap-tuneable undulator systems called SASE1, SASE2, and SASE3. The electron beam energy of the EXFEL is variable between 8.5 and 17.5 GeV. SASE1 and SASE2 are hard X-ray FELs using planar undulators with a period length of 40 mm, called U40s. By a suitable choice of the beam energy and undulator gap, the wavelength can be tuned from 0.05 to 0.4 nm. SASE3 is a soft X-ray FEL using planar undulators with a period length of 68 mm, called U68s. Under the same conditions, the wavelength can be tuned from 0.4 to 5.2 nm

The Status of the SASE3 Variable Polarization Project at the European XFEL

The undulator systems at the European XFEL consist of two hard X ray systems, SASE1 and SASE2, and one soft X ray system, SASE3. All three systems are equipped with planar undulators using permanent neodymium magnets. These systems allow the generation of linearly polarized radiation in the horizontal plane. In order to generate variable polarization radiation in the soft X ray range, an afterburner is currently being implemented behind the SASE3 planar undulator system. It consists of four APPLE X helical undulators. The project, called SASE 3 Variable Polarization, is close to being put into operation. All four helical undulators have been installed in the tunnel during the 2021 2022 winter shutdown. This paper describes the status of the project and the steps toward its commissioning. It also presents lessons learned during the implementation of the projec

The Large Scale European XFEL Control System: Overview and Status of the Commissioning

The European XFEL is a 3.4 km long X-ray Free Electron Laser in the final construction and commissioning phase in Hamburg. It will produce 27000 bunches per second at 17.5 GeV. Early 2015 a first electron beam was produced in the RF-photo-injector and the commissioning of consecutive sections will follow during this and next year. The huge number and variety of devices for the accelerator, beam line, experiment,cryogenic and facility systems pose a challenging control task. Multiple systems, including industrial solutions, must be interfaced to each other. The large number of bunches requires a tight time synchronization (down to picoseconds) and high performance data acquisitionsystems. Fast feedbacks from front-ends, the DAQs and online analysis system with a seamless integration of controls are essential for the accelerator and the initially 6 experimental end stations. It turns out that the European XFEL will be the first installation exceeding 2500 FPGAcomponents in the MicroTCA form factor and will run one of the largest PROFIBUS networks. Many subsystem prototypes are already successfully in operation. An overview and status of the XFEL control system will be given