Application of Stearic Acid for Solar Thermal Energy Storage in a Double Compartment Solar Box Cooker

Energy storage in some form is the need of the hour to even out the mismatch between energy supply and demand. Thermal Energy Storage (TES) system employing a phase change material (PCM) has been widely considered as an effective way to store and retrieve energy due to its high heat storage capacity at almost constant temperature during the phase change. In this work, an energy storage system was designed to study the heat transfer characteristics of stearic acid (as a phase change material in a double compartment solar box cooker (DCSBC) fabricated using wooden materials with high thermal energy storage system. In order to analyze the various characteristics of the PCM, the Bureau of Indian Standards (BIS) was used throughout the experiment. Investigations were performed to determine the first and second figure of merits (F1 and F2) of compartments 1 and 2 (C1 and C2) simultaneously. The results for F1 were found to be (C1= 0.14 and C2= 0.15) and F2 were (C1=0.47 and C2= 0.4) while the overall thermal efficiency of the cooker after water boiling test for C1 with 2.5kg and C2 with 3kg of water were deduced to be 77% for C1 and 92% for C2 after six hours of the load test, showing considerable temperature increase and extension of heat retention making possible to cook the dinner and even breakfast the next day

Combustion Modeling of a Fixed Bed Downdraft Biomass Gasifier Using Computational Fluid Dynamics Design

Thermochemical conversion of biomass in a gasifier for the production of syngas provides the enabling technology for efficient biomass resource utilization. Gasification is a complex process involving the interactions of numerous parameters, hence CFD tool is usually utilized to numerically optimize the design and operation of the gasifier reactor for improved performance. The gasification of multiple biomass usually requires a complex set of facilities for experimental set up in order to determine the optimum operating conditions for maximum gas yield. When this is not available, it can pose a bottle-neck to process development and optimization.  In this study, the GAMBIT and FLUENT were used to model and simulate the gasifier reactor with emphasis on the combustion and gasification (reduction) zones in order to maximize the thermal output of the combustor by an optimization of biomass fuel types. Model validation was achieved by showing a close agreement between numerical and experimental results within the same configuration, particularly to show the effect of temperature on the gasification of Fixed Bed Downdraft gasifier. The fraction of initial moisture content, air flow rate, temperature of the pyrolysis zone, and chemical composition of the biomass were the required input data for the model to predict the gasification temperature. Computations were carried out for rice husk, saw dust and corn cobs as gasifier fuels, whereby air was used as the oxidizing agent. The porosity and oxidizer velocity were varied between 0.1 – 0.5 and 5 – 15 m/s respectively. The predicted results compared with experimental data showed good agreement. The simulated temperature gradient also indicated that rich fuel combustion zone was greater for rice husk - corn cobs, an indication that improved gasification and pyrolysis were present

Physical And Mechanical Characteristics Of Charcoal, Sawdust And Sugarcane Bagasse As Solid Fuel Materials

This paper reports on the physical and mechanical characteristics of briquettes produced from charcoal, sawdust and sugarcane bagasse using molasses with sodium silicate as binders. Charcoal, sawdust and sugarcane bagasse were mixed in respective ratio of 20:20:60, 20:30:50, 20:40:40, 20:50:30 and 20:60:20. The briquettes were produced using Budenberg dial gauge compression machine, with pressure of 64 MPa at 120 seconds dwell time. Physical properties (relaxation ratio, compaction ratio and shattering index) and mechanical property (compressive strength) of the produced briquettes were investigated. Results show that briquette with sample composition of 20:30:50 has better physical properties with relaxation ratio of 1.562, compaction ratio of 7.573 and shatter index of 99.6%, while sample with ratio 20:40:40 has highest compressive strength of 55.43 kN/m2

Investigation of Thermal Insulation Properties of Biomass Composites

This paper reports on the investigation of thermal properties of Kapok, Coconut fibre and Sugarcane bagasse composite materials using molasses as a binder. The composite materials were moulded into 12 cylindrical samples using Kapok, Bagasse, Coconut fibre, Kapok and Bagasse in the ratios of (70:30; 50:50 and 30:70), Kapok and Coconut fibre in the ratios of (70:30; 50:50 and 30:70), as well as a combination of Kapok, Bagasse and Coconut fibre in ratios of (50:10:40; 50:40:10 and 50:30:20). The sample size is a 60mm diameter with 10mm – 22mm thickness compressed at a constant load of 180N using a Budenberg compression machine. Thermal conductivity and diffusivity tests were carried out using thermocouples and the results were read out on a Digital Multimeter MY64 (Model: MBEB094816), while a Digital fluke K/J thermocouple meter PRD-011 (S/NO 6835050) was used to obtain the temperature measurement for diffusivity. It was observed that of all the twelve samples moulded, Bagasse, Kapok plus Bagasse (50:50), Kapok plus Coconut fibre (50:50) and Kapok plus Bagasse plus Coconut fibre (50:40:10) has the lowest thermal conductivity of 0.0074, 0.0106, 0.0132, and 0.0127 W/(m-K) respectively and the highest thermal resistivity. In this regard, Bagasse has the lowest thermal conductivity followed by Kapok plus Bagasse (50:50), Kapok plus Bagasse plus Coconut fibre (50:40:10) and Kapok plus Coconut fibre (50:50)

Optimization of a Morphing Wing Based on Coupled Aerodynamic and Structural Constraints

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/77091/1/AIAA-39016-101.pd

Consequence of aging at Au/HTM/perovskite interface in triple cation 3D and 2D/3D hybrid perovskite solar cells

Perovskite solar cells (PSCs) expressed great potentials for offering a feasible alternative to conventional photovoltaic technologies. 2D/3D hybrid PSCs, where a 2D capping layer is used over the 3D film to avoid the instability issues associated with perovskite film, have been reported with improved stabilities and high power conversion efficiencies (PCE). However, the profound analysis of the PSCs with prolonged operational lifetime still needs to be described further. Heading towards efficient and long-life PSCs, in-depth insight into the complicated degradation processes and charge dynamics occurring at PSCs' interfaces is vital. In particular, the Au/HTM/perovskite interface got a substantial consideration due to the quest for better charge transfer; and this interface is debatably the trickiest to explain and analyze. In this study, multiple characterization techniques were put together to understand thoroughly the processes that occur at the Au/HTM/perovskite interface. Inquest analysis using current–voltage (I–V), electric field induced second harmonic generation (EFISHG), and impedance spectroscopy (IS) was performed. These techniques showed that the degradation at the Au/HTM/perovskite interface significantly contribute to the increase of charge accumulation and change in impedance value of the PSCs, hence resulting in efficiency fading. The 3D and 2D/3D hybrid cells, with PCEs of 18.87% and 20.21%, respectively, were used in this study, and the analysis was performed over the aging time of 5000 h. Our findings propose that the Au/HTM/perovskite interface engineering is exclusively essential for attaining a reliable performance of the PSCs and provides a new perspective towards the stability enhancement for the perovskite-based future emerging photovoltaic technology.Scopu

Expanding the allelic spectrum of ELOVL4‐related autosomal recessive neuro‐ichthyosis

Background Very long-chain fatty acids (VLCFAs) composed of more than 20 carbon atoms are essential in the biosynthesis of cell membranes in the brain, skin, and retina. VLCFAs are elongated beyond 28 carbon atoms by ELOVL4 enzyme. Variants in ELOVL4 are associated with three Mendelian disorders: autosomal dominant (AD) Stargardt-like macular dystrophy type 3, AD spinocerebellar ataxia, and autosomal recessive disorder congenital ichthyosis, spastic quadriplegia and impaired intellectual development (ISQMR). Only seven subjects from five unrelated families with ISQMR have been described, all of which have biallelic single-nucleotide variants. Methods We performed clinical exome sequencing on probands from four unrelated families with neuro-ichthyosis. Results We identified three novel homozygous ELOVL4 variants. Two of the families originated from the same Saudi tribe and had the exact homozygous exonic deletion in ELOVL4, while the third and fourth probands had two different novel homozygous missense variants. Seven out of the eight affected subjects had profound developmental delay, epilepsy, axial hypotonia, peripheral hypertonia, and ichthyosis. Delayed myelination and corpus callosum hypoplasia were seen in two of five subjects with brain magnetic rosonance imaging and cerebral atrophy in three. Conclusion Our study expands the allelic spectrum of ELOVL4-related ISQMR. The detection of the same exonic deletion in two unrelated Saudi family from same tribe suggests a tribal founder mutation

Loss-of-function mutations in UDP-Glucose 6-Dehydrogenase cause recessive developmental epileptic encephalopathy

Developmental epileptic encephalopathies are devastating disorders characterized by intractable epileptic seizures and developmental delay. Here, we report an allelic series of germline recessive mutations in UGDH in 36 cases from 25 families presenting with epileptic encephalopathy with developmental delay and hypotonia. UGDH encodes an oxidoreductase that converts UDP-glucose to UDP-glucuronic acid, a key component of specific proteoglycans and glycolipids. Consistent with being loss-of-function alleles, we show using patients’ primary fibroblasts and biochemical assays, that these mutations either impair UGDH stability, oligomerization, or enzymatic activity. In vitro, patient-derived cerebral organoids are smaller with a reduced number of proliferating neuronal progenitors while mutant ugdh zebrafish do not phenocopy the human disease. Our study defines UGDH as a key player for the production of extracellular matrix components that are essential for human brain development. Based on the incidence of variants observed, UGDH mutations are likely to be a frequent cause of recessive epileptic encephalopathy

Stem cell function and stress response are controlled by protein synthesis.

Whether protein synthesis and cellular stress response pathways interact to control stem cell function is currently unknown. Here we show that mouse skin stem cells synthesize less protein than their immediate progenitors in vivo, even when forced to proliferate. Our analyses reveal that activation of stress response pathways drives both a global reduction of protein synthesis and altered translational programmes that together promote stem cell functions and tumorigenesis. Mechanistically, we show that inhibition of post-transcriptional cytosine-5 methylation locks tumour-initiating cells in this distinct translational inhibition programme. Paradoxically, this inhibition renders stem cells hypersensitive to cytotoxic stress, as tumour regeneration after treatment with 5-fluorouracil is blocked. Thus, stem cells must revoke translation inhibition pathways to regenerate a tissue or tumour.This work was funded by Cancer Research UK (CR-UK), Worldwide Cancer Research, the Medical Research Council (MRC), the European Research Council (ERC), and EMBO. Research in Michaela Frye's laboratory is supported by a core support grant from the Wellcome Trust and MRC to the Wellcome Trust-Medical Research Cambridge Stem Cell Institute.This is the author accepted manuscript. The final version is available from Nature Publishing Group via http://dx.doi.org/10.1038/nature1828