268 research outputs found

    Designing of Collagen Based Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) Scaffolds for Tissue Engineering

    Get PDF
    P(3HB-co-4HB) copolymer was modified using collagen by adapting dual solvent system. The surface properties of samples were characterized by Fourier transforminfrared spectroscopy (FTIR), scanning electron microscopy (SEM), organic elemental analysis (CHN analysis), and water contact angle measurements.The effects of collagen concentration, scaffold thickness, and 4HB molar fraction on the hydrophilicitywere optimized by the Taguchi method.The orthogonal array experiment was conducted to obtain the response for a hydrophilic scaffold. Analysis of variance (ANOVA) was used to determine the significant parameters and determine the optimal level for each parameter. The results also showed that the hydrophilicity of P(3HB-co-4HB)/collagen blend scaffolds increased as the collagen concentration increased up to 15 wt% with a molar fraction of 50mol% at 0.1mm scaffold thickness. The biocompatibility of the P(3HB-co-4HB)/collagen blend surface was evaluated by fibroblast cell (L929) culture.The collagen blend scaffold surfaces showed significant cell adhesion and growth as compared to P(3HB-co-4HB) copolymer scaffolds

    DEGRADATION, MECHANO-PHYSICAL, AND MORPHOLOGICAL PROPERTIES OF EMPTY FRUIT BUNCH REINFORCED POLYESTER COMPOSITES

    Get PDF
    This research aims to study the effects of degradation on mechanical, physical, and morphological properties of empty fruit bunch (EFB) fiber- reinforced polyester composites. The unsaturated polyester resin has been used to produce thermoset polymer composites. The reinforcing effect in composites was evaluated at various fiber loadings, including an overall fiber content (by weight) of 20% and 40%. The mechanical (tensile, flexural, and impact) and physical (density, moisture content, and water absorption) properties were studied before and after the samples were buried in the soil for period of 12 months. Scanning electron microscope (SEM) analysis was conducted to visualize the effect of the quality of adhesion between the fibers and matrix. The soil burial investigation results revealed that EFB fiber-polyester composites showed highest degradation percentage as compared to polyester resin and fiberglass

    Nonwood-based composites

    Get PDF
    Nonwood fibers are derived mostly from fastgrowing plants. For the past few decades, nonwood plant fibers have received much attention, especially for composite material applications, because of their low cost, low density, high specific strength, good mechanical properties, nonabrasiveness, eco-friendliness, and biodegradability. This article reviews the performance of nonwood fibers found mostly in Asia, as well as issues regarding their bonding. Because various classifications of nonwood exist, this article sorts nonwood fibers based on previous classifications with some modifications, accounting for the availability of these fibers in Asia. The mechanical and physical properties of nonwood-based composites such as fiberboard, particleboard, and veneer-based laminated products also are reviewed and discussed. All fibers demonstrate certain advantages over conventional composites, with some having better mechanical and physical properties. This article also highlights the issues and challenges regarding the use of nonwood fibers as composite materials

    Reduced graphene oxide-multiwalled carbon nanotubes hybrid film with low Pt loading as counter electrode for improved photovoltaic performance of dye-sensitised solar cells

    Get PDF
    In this work, the role of reduced graphene oxide (rGO) with hyperbranched surfactant and its hybridisation with multiwalled carbon nanotubes (MWCNTs) and platinum (Pt) nanoparticles (NPs) as counter electrode (CE) were investigated to determine the photovoltaic performance of dye-sensitised solar cells (DSSCs). Sodium 1,4-is(neopentyloxy)-3-(neopentyloxycarbonyl)- 1,4-dioxobutane-2-sulphonate (TC14) surfactant was utilised as dispersing and stabilising agent in electrochemical exfoliation to synthesise graphene oxide (GO) as initial solution for rGO production prior to its further hybridisation and fabrication as thin film. A chemical reduction process utilising hydrazine hydrate was conducted to produce rGO due to the low temperature process and water-based GO solution. Subsequently, hybrid solution was prepared by mixing 1 wt% MWCNTs into the produced rGO solution. TC14-rGO and TC14-rGO_MWCNTs hybrid solution were transferred into fluorine-doped tin oxide substrate to fabricate thin film by spraying deposition method. Finally, the CE films were prepared by coating with thin Pt NPs. Photoanode film was prepared by a two-step process: hydrothermal growth method to synthesise titanium dioxide nanowires (TiO2 NWs) and subsequent squeegee method to apply TiO2 NPs. According to solar simulator measurement, the highest energy conversion efficiency (η) was achieved by using CE-based TC14-rGO_MWCNTs/Pt (1.553%), with the highest short current density of 4.424 mA/cm2. The highest η was due to the high conductivity of CE hybrid film and the morphology of fabricated TiO2 NWs/TiO2 NPs. Consequently, the dye adsorption was high, and the photovoltaic performance of DSSCs was increased. This result also showed that rGO and rGO_MWCNTs hybrid can be used as considerable potential candidate materials to replace Pt gradually

    Designing of Collagen Based Poly(3-hydroxybutyrate- co

    Get PDF
    P(3HB-co-4HB) copolymer was modified using collagen by adapting dual solvent system. The surface properties of samples were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), organic elemental analysis (CHN analysis), and water contact angle measurements. The effects of collagen concentration, scaffold thickness, and 4HB molar fraction on the hydrophilicity were optimized by the Taguchi method. The orthogonal array experiment was conducted to obtain the response for a hydrophilic scaffold. Analysis of variance (ANOVA) was used to determine the significant parameters and determine the optimal level for each parameter. The results also showed that the hydrophilicity of P(3HB-co-4HB)/collagen blend scaffolds increased as the collagen concentration increased up to 15 wt% with a molar fraction of 50 mol% at 0.1 mm scaffold thickness. The biocompatibility of the P(3HB-co-4HB)/collagen blend surface was evaluated by fibroblast cell (L929) culture. The collagen blend scaffold surfaces showed significant cell adhesion and growth as compared to P(3HB-co-4HB) copolymer scaffolds

    Natural fiber reinforced poly(vinyl chloride) composites : a review.

    Get PDF
    Materials from renewable resources – also called biomaterials or ‘green’ materials – are presently gaining in importance worldwide. In these times of continuous increases in the price of crude oil and discussion of carbon dioxide (CO2) emissions, conventional plastics have reached a price level and a questionable image which promotes the search of alternatives. Natural fibers are a renewable natural resource and are biodegradable, which is an important characteristic for components that must be disposed of at the end of their useful life. They are recyclable and can be easily converted into thermal energy through combustion without leaving residue. In this study, we will discuss the natural fiber reinforced polyvinyl chloride composites, reinforcing effect, plasticization effect along with modification by coupling agents, properties, and applications based on composite materials. Also, the polyvinyl chloride-based composite materials with specific emphasis on effect of coupling agent, foamed polyvinyl chloride composites, and the effect of natural fiber reinforcement on its material properties will be reviewed. One of the best alternatives is natural fiber reinforced plastics composites. These are composites that are typically filled or reinforced with plant fibers, as well as plastics such as polyvinyl chloride or recently, even bioplastics

    A Jatropha biomass as renewable materials for biocomposites and its applications.

    Get PDF
    This review deals with the study of Jatropha biomass as renewable materials for biocomposites and its applications. Jatropha curcas is a multipurpose plant with many attributes and considerable potential. Jatropha plant is cultivated worldwide but it has specific cultivation area in Central and South America, Africa, and South Asia. The Jatropha plant produces many useful products, especially the seed from which oil can be extracted. Extracted oil has similar properties to palm oil and possible to obtain many products after processing. As biomass, Jatropha plant can used as a reinforcement in biocomposite development. Jatropha contain high amount of carbon especially in seed/husk, fruit shell and seed cake and can be used as filler in composite fabrication in the form of carbon black and activated carbon.In this review, we will discuss the distribution of Jatropha around the globe, chemical composition of various parts and extracts of Jatropha and their mechanical and physical properties. We will also cover the use of Jatropha biomass in various technical and biocomposite applications. With the development of green technology, Jatropha latex can be reduced to nanoparticle size. The chemical and physical properties of Jatropha contribute to its applications in food and non-food Products

    Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites

    Get PDF
    The increasing demand for new food packaging materials which satisfy people requirements provided thrust for advancement of nano-materials science. Inherent permeability of polymeric materials to gases and vapours; and poor barrier and mechanical properties of biopolymers have boosted interest in developing new strategies to improve these properties. Research and development in polymeric materials coupled with appropriate filler, matrix-filler interaction and new formulation strategies to develop composites have potential applications in food packaging. Advancement in food packaging materials expected to grow with the advent of cheap, renewable and sustainable materials with enhanced barrier and mechanical properties. Nanoparticles have proportionally larger surface area and significant aspect ratio than their micro-scale counterparts, which promotes the development of mechanical and barrier properties. Nanocomposites are attracting considerable interest in food packaging because of these fascinating features. On the other hand, natural fibres are susceptible to microorganisms and their biodegradability is one of the most promising aspects of their incorporation in polymeric materials. Present review article explain about different categories of nanoclay and natural fibre based composite with particular regard to its applications as packaging materials and also gives an overview of the most recent advances and emerging new aspects of nanotechnology for development of hybrid composites for environmentally compatible food packaging materials

    Effect of fiber treatment on dimensional stability and chemical resistance properties of hybrid composites

    Get PDF
    In this work, oil palm empty fruit bunch (EFB) and jute fibers were treated by 2-hydroxy ethyl acrylate (2-HEA) to enhance interaction with the epoxy matrix in hybrid composites. Hybrid composites were fabricated by the hand lay-up technique by reinforcing chemical-treated oil palm EFB and jute fibers in an epoxy matrix. Physical (density, void content, water absorption, and thickness swelling) and chemical resistance properties of treated hybrid composites were characterized. Chemically treated oil palm EFB/jute fiber reinforced hybrid composites display better dimensional stability (water absorption and thickness swelling) and chemical resistance as compared to untreated hybrid composites

    A review on quality enhancement of oil palm trunk waste by resin impregnation: future materials

    Get PDF
    Oil palm trunk (OPT) is a solid waste obtained in large quantities after the felling of oil palm trees and is available year-round. Scientists and industrialists face difficulties in utilizing these solid wastes for different applications due to great variations in their physical and mechanical properties. Because OPT consists of lignocellulosic materials, its cellulosic material is utilized in the production of panel products such as particleboard, medium density fibreboard, mineral-bonded particleboard, block board, and cement board. In order to control the OPT waste, it is essential to consider its alternative utilization inside buildings as lightweight construction materials and furniture. The impregnation of different resins in wood and non-wood materials can improve the quality of the OPT, making it possible to utilize OPT as raw materials for different applications. The enhanced properties and good appearance of impregnated OPT have found use in high-grade furniture and housing materials. In order to further evaluate its potential, this review has been compiled for the detailed study of various properties, characteristics, and applications of OPT
    corecore